Oypla Office 4643 User manual

User Manual
USER MANUAL Model No: 4643
Suggestion Box

•This product should only be used for its designated purpose.
•Make sure all fixings are secured before using this product. The user is fully
responsible for ensuring the safe is mounted securely before use.
•This product is intended for indoor use only.
•This product is not a toy, and is only to be used for its designated purpose.
•Do not carry out alterations or modifications to this product.
•This product contains small parts that could be a choking hazard ifswallowed.
Keep these items away from children.
•Do not discard any of the packaging until you have checked that you have allthe
parts and fittings required.
•If the product is damaged or has any defects, [e-mail]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 4643
Safety Information

Parts List:
If you are missing any of the below parts please contact [email protected]om
Please be aware that you will be referring to this parts list throughout the assembly process.
Part
Photo
Suggestion Box
Screw x2
Plug x2
Key x2
1
2
3
4
USER MANUAL Model No: 4643

Mounting Instructions
If you wish to mount your Suggestion Box to a wall or surface, please follow the below instructions.
1) Open the lid of the Suggestion Box using the Key, before holding the Suggestion Box up against
the mounting surface you wish to attach it to. Then, using a pencil or other marker, mark the
positions of the two holes onto the wall or mounting surface. (The holes can be found inside the
Suggestion Box once it is open).
2) Move the Suggestion Box away from the wall/surface, and proceed to drill the two marked holes
deep enough for the Plugs to fit all the way in. Choosing the correct drill bit is important, do not use
a drill bit with a diameter that is larger than the Plug’s diameter.
3) Insert the Plugs into the mounting surface.
4) Like you did in step 1, hold the Suggestion Box up against the mounting surface –ensuring that
the two holes align with the holes you have now drilled and entered plugs into.
5) Whilst the holes are aligned, proceed to drill/screw in the Screws into the holes –aim to enter
them fully to prevent any instability whilst using the product.
6) You can now move the Suggestion Box away from the mounting surface. It can now be locked
using the Key, and it is ready to use.
Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 4643