OzCharge OC-61201 User manual

OC-61201 User’s Manual - Rev 1.0
1
Automatic Battery Charger & Maintainer
Input: 100-240Vac / Output: 6/12 Volt DC (1 Amp)
User’s Manual and Important Safety Information
Model: OC-61201
- - - - - - - - - - - - - - - - - - - WARNINGS - - - - - - - - - - - - - - - - - - - - -
•Read instructions prior to use. These instructions form part of the warranty conditions.
•This appliance must not be used or played with by infirm persons or children.
•If using Generator power, please use a Surge Protector to protect the unit from Voltage
Spikes.
•Do not attempt to use the charger if it has been dropped or damaged.
•Never attempt to charge a damaged battery, frozen battery or non-rechargeable battery.
•Do not use the charger in a closed area or poorly-ventilated area.
•Never smoke, use an open flame, or create sparks near a battery or charger during charging
operation as this may cause an explosion / explosive gas.
•Do not operate the charger if the cord or plug is damaged.
•Do not disassemble the charger. Take it to a qualified person if a repair is required. (No
serviceable Parts inside)
FEATURES
Congratulations on purchasing an AS/NZS Approved OzCharge Automatic Switching Mode
Battery Charger and Maintainer.
•High frequency, High Efficiency Switching Mode Charger and Maintainer
•Suits all Lead Acid Type Batteries. (Conventional, AGM & Gel)
•Selectable 6 Volt & 12 Volt Output
•Includes both crocodile clips and ring terminal leads

OC-61201 User’s Manual - Rev 1.0
6
SPECIFICATIONS
1 AC Power Input Characteristics Normal Withstand Unit
1-1 Input voltage : 100-240 90~264 Vac
1-2 Input frequency : 50/60 47-63 Hz
1-3 Unload input power : at 230Vac input 1.5 max. W
1-4 Input current consumption at 230Vac input, output 13.5V 1000mA loading .019 ±10% Aac
1-5 Nominal efficiency: at 115Vac, output 13.5V 1000mA loading
Nominal efficiency: at 230Vac, output 13.5V 1000mA loading
>78%
>82%
2 Charging Output Control Characteristics
2-1 Battery Condition Check →Bulk Charge →Float Charge (Full)
2-2 Charging output control for 6V mode
2-2-1 Bulk charging activity conditions: Battery Voltage is above 4.4 ±0.3 Vdc
2-2-2 Bulk charging current control 1000 ±10% mAdc
2-2-3 Level 1 upper limited 7.2 ±0.2 Vdc
2-3-4 Level 2 lower limited 6.75 ±0.2 Vdc
2-3-5 Level 3 upper limited 7.0 ±0.2 Vdc
2-3 Charging output control for 12V mode
2-3-1 Bulk charging activity conditions: Battery Voltage is above 8.8 ±0.3 Vdc
2-3-2 Bulk charging current control 1000 ±10% mAdc
2-3-3 Level 1 upper limited 14.4 ±0.2 Vdc
2-3-4 Level 2 lower limited 13.5 ±0.2 Vdc
2-3-5 Level 3 upper limited 14.0 ±0.2 Vdc
2-4 Unload output voltage when disconnected from battery 0.5 Max. Vdc
2-5 Battery flow back current (to the charger) when connected to 12V battery, AC
power disconnected
1 Max. mAdc
3 Safety & Protection
3-1 Built in Temperature Protection.
3-2 Output Short Circuit Protection, Reverse Polarity Protection
4 Electrical Parts
4-1 Input Connector Wall mount / 3 Pin
4-2 Out Put Connector 4 feet - Quick connect
4-3 Extension leads 2 feet – Crocodile clips / ring terminals
5 Physical Parameters
5-1 Plastic Enclosure Dimensions 100(L) x 65(W) x 36(H) mm
5-2 Net weight : approx. 400g
6 Environmental Characteristics
6-1 Operating temperature : 0 to 45 oC
6-2 Storage temperature : -25 to 85 oC
6-3 Operating Humidity range : 0 to 90% RH
6-4 Cooling: Passive / Natural
* Specifications subject to change without notice

OC-61201 User’s Manual - Rev 1.0
7
2 YEAR MANUFACTURER WARRANTY
Zylux Distribution Pty. Ltd. (OzCharge) warrants to the Customer that this product is substantially
free from defects in materials and workmanship under normal use for a period of 2 Years from the
Date of Purchase.
Please ensure you keep a copy of your receipt on file as this will be required for proof of purchase
and to validate your warranty.
Obtaining Warranty Service
Within the warranty period, the Customer must contact the authorised supplier / retailer where the
product was purchased or alternatively you can contact the OzCharge service centre through one
of the following methods:
Hotline: [phone]
Website: www.ozcharge.com.au
If the Authorised Supplier and / or OzCharge service centre concludes that while under normal
use, a product failure or malfunction occurred during the warranty period and was caused by a
defect in material or workmanship (see Exclusions), the Customer will be asked to ship to the
nearest service point. The product must be packaged appropriately for safe shipment. To prove
that the product is under warranty, the customer should enclose a copy of their receipt for proof of
purchase. It is recommended that returned products be sent by registered mail as Zylux
Distribution Pty. Ltd. (OzCharge) accepts no responsibility / liability for goods lost or damaged in
transit. Return Shipping costs to be incurred by the Customer.
Exclusions
If upon receiving a product for repair and if testing and examining the product has disclosed that
the alleged defect or malfunction in the product does not exist or was caused by the Customer or
any third persons misuse, physical abuse, water damage, unauthorised attempts to open, repair
or modify the product or improper installation, this will not be covered under this warranty.
This Warranty is void if:
1. The product has been tampered or repaired by unauthorised personnel.
2. If connected to generator power without using surge protector
3. The warranty seal is broken or altered.
4. The warranty period has expired.

OC-61201 User’s Manual - Rev 1.0
8
Distributed by Zylux Distribution Pty. Ltd.
Website: www.ozcharge.com.au