Ozito OZMM1010A User manual

Multipurpose
Mixer
1010 Watt
Operation Manual
3 Year Replacement Warranty
OZMM1010A
To view the full range visit: www.ozito.com.au
0209

Motor size: 1010W
Input: 230V ~ 50 Hz
No load speed: 250 - 750 rpm
Max. mixing capacity: 80L
Mixing paddle size: 600mm (length) 120mm (Ø)
Mixing paddle thread: M14 x 2.0mm
Tool weight: 3.05kg
Features: Soft grip rear handle
Lock Off Switch
Paddle included
Soft Start
1
7
8
2
SPECIFICATIONS – MODEL NO. OZMM1010A
2
4
5
1. Front handle 5. Lock off button
2. Carbon brush caps 6. On/off trigger switch
3. Variable speed dial 7. Mixing paddle
4. Soft grip rear handle 8. Protective disc
3
6

3
INTRODUCTION
SAFETY INSTRUCTIONS
Warning! When using mains-powered equipment, basic safety precautions,
including the following, should always be followed to reduce risk of fire, electric
shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool
OFF, in an emergency, before operation.
Save these instructions and other documents supplied with this machine for
future reference.
1. Keep work areas clean. Cluttered areas and benches can cause accidents.
2. Consider work area environment. Do not expose your tool to high humidity
or rain. Do not use your tool in damp and wet conditions. Keep the work area
well lit. Do not use your tool where there is a risk of causing fire or explosion,
e.g. in the presence of flammable liquids and gases.
3. Keep children away. Do not allow children, visitors or animals to come near
the work area or to touch the tool or power lead.
4. Guard against electric shock. Prevent body contact with earthed or grounded
surfaces (e.g. pipes, radiators, cookers and refrigerators).
Electric safety can be further improved by using a high sensitivity (30 mA/30
mS) residual current device (RCD).
5. Do not overreach. Keep proper footing and balance at all times.
6. Stay alert. Watch what you are doing. Use common sense. Do not operate the
tool when you are tired.
7. Extension leads. Before use inspect the extension leads and replace if
damaged. When using the tool outdoors, only use extension leads intended for
outdoor use and marked accordingly.
Congratulations on purchasing an Ozito Multipurpose Mixer.
We aim to provide quality tools at an affordable price.
We hope you will enjoy using this tool for many years.
Your Multipurpose Mixer OZMM1010A has been designed
to mix various materials into consistency batches as required
for the end user. This tool is intended for DIY use only.
GENERAL

Warning! The use of any accessory or attachment, or performance of any
operation with this tool other than those recommended in this instruction
manual may present a risk of personal injury.
8. Check for damaged parts. Before use carefully check the tool and power lead
for damage. Check for misalignment and seizure of moving parts, breakage of
parts, damage to guards and switches and any other conditions that may affect
its operation. Ensure that the tool will operate properly and perform its
intended function. Do not use the tool if any parts are damaged or defective.
Do not use the tool if the switch does not turn it on and off. Have any
damaged or defective parts repaired or replaced by a power tool repairer.
Never attempt any repairs yourself.
9. Unplug the tool. Unplug the tool when it is not in use, before changing any
parts of the tool, accessories or attachments and before servicing.
10. Avoid unintentional starting. Do not carry the tool with a finger on the on/off
switch. Make sure the tool is switched off when plugged in.
11. Do not abuse the cord. Never carry the tool by its cord or pull it to disconnect
from the socket. Keep the cord away from heat, oil and sharp edges.
12. Store idle tools. When not in use, tools should be stored in a dry, locked up or
high place, out of reach of children.
13. Maintain tools with care. Keep cutting tools sharp and clean for better and
safer performance. Follow the instructions for maintenance and changing
accessories. Keep handles and switches dry, clean and free from oil and grease.
14. Have your tool repaired by a power tool repairer. This power tool complies
with relevant safety requirements. To avoid danger, electrical appliances must
only be repaired by qualified technicians using original spare parts; otherwise
this may result in considerable danger to the user.
15. Users. This appliance is not intended for use by young children or infirmed
persons without supervision.
Young children should be supervised to ensure that they do not play with
this appliance.
16. Replacement of the supply cord. If the supply cord is damaged, it must be
replaced by a power tool repairer in order to avoid a hazard.
17. Connect dust extraction equipment. If devices are provided for the
connection of dust extraction and collection facilities, ensure that these are
connected and properly used.
18. Store idle tools. When not in use, tools should be stored in a dry, locked up or
high place, out of reach of children.
19. Maintain tools with care. Keep tools clean and in good condition for better
and safer performance. Follow the instructions for maintenance and changing
accessories. Keep handles and switches dry, clean and free from oil and grease.
4
GENERAL (cont.)

5
Before mixing ensure the container used is in good condition and durable.
When using the Multipurpose mixer ensure you have the protection disc attached to
the unit to protect the mixer from enduring any unwanted materials into the motor.
Ensure you keep the vents of the Multipurpose mixer free of any foreign materials.
Warning! Some dust created by power sanding, sawing, grinding, drilling and
other construction activities contain chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically treated timber
Your risk from these exposures vary, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area and work
with approved safety equipment, such as dust masks that are specially designed to
filter out microscopic particles.
Auxiliary Handle
Attach auxiliary handle over the top of the mount near metal gear box by placing the
bolt through the handle mount to the other side. Tighten by hand the fixing knob to
the protruding bolt on the other side of the handle. Ensure that it is fixed in place.
Adjust the handle by loosing the retaining knob and tilt the handle to the desired
position. Tighten the fixing knob to stay in place.
Attaching the Paddle and Protection Disc
Place the mixing paddle and
protection disc at the opening
of the threaded chuck. Carefully
rotate the threaded attachment
with the protection disc flush to
the chuck and turn clockwise
until tight. Then by using the
spanners provided hold the
threaded chuck in place whilst
tightening the mixing paddle.
SAFETY INSTRUCTIONS FOR MULTIPURPOSE MIXERS
OPERATION

Soft Start
The multipurpose mixer is fitted with a soft start, this is an added safety feature
that reduces the start up torque that can cause the tool to twist quickly.
Lock Off Switch
ALWAYS PICK UP YOUR MULTIPURPOSE MIXER BEFORE DEPRESSING
THE SWITCH.
The multipurpose mixer is started by first depressing the lock off button on the side
of the handle and then the trigger switch. The multipurpose mixer will not start
unless the lock off button is depressed. To turn the multipurpose mixer OFF,
release the trigger.
This tool is not designed for the trigger switch to be locked in the ‘ON’ position.
Never jam the trigger switch in the ‘ON’ position.
Variable Speed Dial
The variable speed is a dial which can increase the source of your power from low to
high speed depending on what consistency or how thick the materials you are
mixing.
• Keep the ventilation slots of the tool clean at all times and prevent any foreign
matter from entering.
• If the enclosure of the tool requires cleaning do not use solvents but a moist
soft cloth only. Never let any liquid get inside the tool; never immerse any part
of the tool (other than the mixing paddle) into a liquid.
Note: Ozito Industries will not be responsible for any damage or injuries caused by
repairing of the tool by an unauthorised person or by mishandling of the tool.
6
OPERATION (cont.)
MAINTENANCE

CONTENTS
7
OZITO INDUSTRIES PTY LTD
1 x Multipurpose Mixer OZMM1010A
1 x Mixing paddle
1 x Protection disc
2 x Spanners
1 x Operation manual
AUSTRALIA (Head Office)
1 - 23 Letcon Drive, Bangholme, Victoria, Australia 3175
Telephone: [phone]
Facsimile: [phone]
Website: www.ozito.com.au
Email: [email protected]

WARRANTY
THIS WARRANTY FORM AND CONFIRMED BUNNINGS REGISTER RECEIPT SHOULD BE
RETAINED BY THE CUSTOMER AT ALL TIMES
The warranty is only made available by returning the product to your nearest
Bunnings Warehouse with a confirmed Bunnings register receipt
PURCHASED FROM:__________________________________________________
DATE PURCHASED: __________________________________________________
3 YEAR REPLACEMENT WARRANTY
Your Ozito tool is guaranteed for a period of 36 months from the original date of
purchase and is intended for DIY (Do it yourself) use only.
WARNING
The following actions will result in the warranty being void.
• Professional, Industrial or high frequency use.
• If the tool has been operated on a supply voltage other than that specified on the
tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse,
accidents or alterations.
• If the tool is disassembled or tampered with in any way.
Note: Warranty excludes consumable parts such as brushes, batteries, sanding pads,
blades, discs, drill bits, mixing paddles, collets and router bits.
YOUR WARRANTY FORM SHOULD BE RETAINED
BY YOU AT ALL TIMES.
SHOULD YOU HAVE ANY QUESTIONS PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY OR
REPAIR PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER
AND DATE OF PURCHASE AVAILABLE. AN OZITO CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.