Pacific Bay JetStream PB-S06 User manual

Pacific Bay Limited Lifetime Warranty
Pacific Bay products have been manufactured under the highest standards of quality
and workmanship. Pacific Bay warrants to the original purchaser for as long as the
original purchaser owns their home that this shower head will be leak- and drip-free
during normal use and that all parts and finishes of this shower head will be free
from defects in material and manufacturing workmanship. Plated metal and plated
plastic finishes are warranted for (1) year.
If the shower head should develop a leak or drip during the warranty period, Pacific
Bay will, free of charge, provide the parts necessary to put the shower head back
into good working condition by you. They may also replace any part or finish that
proves defective in material and manufacturing workmanship, under normal
installation, use and service free of charge. Proof of purchase (original sales receipt)
from the original purchaser must accompany all warranty claims. Defects or
damages caused by the use of other products or parts is not covered by this
warranty. If repair or replacement is not practical, Pacific Bay may elect to refund
the purchase price in exchange for the return of the product.
This warranty covers replacement of all defective parts and finishes. However,
damage due to product abuse, product misuse, installation error, or the use of
cleaners containing alcohol, abrasives, or other solvents, whether performed by a
contractor, service company, or yourself will void this warranty. Pacific Bay will
not be responsible for labor charges and/or damages incurred in installation, repair
or replacement, nor any indirect, incidental or consequential damages, losses, injury
costs of any nature relating to this product. Except as provided by law, this warranty
is in lieu of and excludes all other warranties, conditions and guarantees, whether
expressed or implied, statutory or otherwise, including without restriction those of
merchantability or of fitness for use.
Pacific Bay will advise you on how to proceed in making warranty claims. To begin
a warranty claim, write to Pacific Bay explaining the defect and include proof of
purchase and your name, address and telephone number. Email is
[e-mail].
* Never use cleaners containing abrasive cleansers, ammonia, bleach, acids,
waxes, alcohol, solvents or other products not recommended for plated metal
or plastic finishes. This will void the warranty.
19215 SE 34th St. Ste 106-382
Camas, WA 98607
PB-S06 – JetStream Heavy Duty Brass 6-Jet Shower Head
Featuring Easy Adjustment for Preferred Flow
NOTE: To reduce after
shower dripping you can
open the valve completely
to allow water to quickly
flow out of the shower
head.

1 Apply Plumbers Tape
Apply plumbers tape, also known as thread seal tape, to the outlet side of the
shower arm in a clockwise direction.
2 Remove Flow Restrictor (Optional)
If you wish to have a stronger flow you may remove the rubber flow restrictor
found in the back end of the shower head.
3 Attach Shower Head
Thread showerhead onto shower arm by turning it in a clockwise direction. Tighten
with an adjustable wrench. After installing, turn on water supply to check for leaks.
MAINTENANCE AND CLEANING
Cleaning Tips: The finish on your shower head is designed to retain its beautiful
sheen for years. To maintain the original look of the finish, a little care and caution
should be used. We recommend the use of mild soap and water to clean the shower
head.
THE USE OF ABRASIVE CLEANERS MAY SCRATCH THE FINISH OR
CAUSE OTHER DAMAGE.
RECOMMENDED TOOLS AND MATERIALS
¨ Adjustable Wrench
¨ Plumbers Tape (Thread Seal Tape)
BEFORE YOU BEGIN
There are a variety of things to do before installing any new plumbing system into
your home or residence. Before you begin work make sure you:
¨ Shut off the main water supply
¨ Cover your drain to prevent loss of parts
¨ Observed any local plumbing codes
¨ Inspect fixture for damage - Replace as necessary
Pacific Bay reserves the right to make any revisions in the design of products
without notice.