Pacific Bay PB-L04 User manual

Pacific Bay Limited Lifetime Warranty
Pacific Bay products have been manufactured under the highest standards of quality
and workmanship. Pacific Bay warrants to the original purchaser for as long as the
original purchaser owns their home that this faucet will be leak- and drip-free
during normal use and that all parts and finishes of this faucet will be free from
defects in material and manufacturing workmanship. If the faucet is used
commercially Pacific Bay warrants the faucet to be free from defects in material and
workmanship for (5) years from the date the faucet was purchased. Plated metal and
plated plastic finishes are warranted for (1) year.
If the faucet should develop a leak or drip during the warranty period, Pacific Bay
will, free of charge, provide the parts necessary to put the faucet back into good
working condition by you. They may also replace any part or finish that proves
defective in material and manufacturing workmanship, under normal installation,
use and service free of charge. Proof of purchase (original sales receipt) from the
original purchaser must accompany all warranty claims. Defects or damages caused
by the use of other products or parts is not covered by this warranty. If repair or
replacement is not practical, Pacific Bay may elect to refund the purchase price in
exchange for the return of the product.
This warranty covers replacement of all defective parts and finishes. However,
damage due to product abuse, product misuse, installation error, or the use of
cleaners containing alcohol, abrasives, or other solvents, whether performed by a
contractor, service company, or yourself will void this warranty. Pacific Bay will
not be responsible for labor charges and/or damages incurred in installation, repair
or replacement, nor any indirect, incidental or consequential damages, losses, injury
costs of any nature relating to this faucet. Except as provided by law, this warranty
is in lieu of and excludes all other warranties, conditions and guarantees, whether
expressed or implied, statutory or otherwise, including without restriction those of
merchantability or of fitness for use.
Pacific Bay will advise you on how to proceed in making warranty claims. To begin
a warranty claim, write to Pacific Bay explaining the defect and include proof of
purchase and your name, address and telephone number. Email is
[e-mail].
PB-L04 – Lynden Bathroom Faucet

INSTALLATION OF THE FAUCET
1 New Faucet Preparation
Completely shut off the water supply.
Remove the old faucet by disconnecting it
from the water supply tubes under the sink
and unscrewing the faucet from the
counter top by removing the mounting
nuts. Clean the sink’s top surface in
preparation for installation of the new
faucet.
2 Install Faucet onto Sink Top
Place the faucet in position on the sink top.
Optional: use silicone under the base plate
for an ultra water tight seal.
3 Install Faucet Under Sink
Screw the provided locknuts and washers
upward from under the sink onto faucet
connectors using your hands only. Tighten
the nuts alternating until they are nearly
flush with the underside of the sink top.
Then, align the faucet as desired. While
maintaining set alignment, tighten down
the locknuts to lock the faucet into place.
Attach the water supply lines to the faucet
by tightening the nuts. Do not overtighten.
4 Connect to Water Supply
Last step is to remove the aerator and
connect the water supply lines. Turn the
water on and allow both the hot and cold
water to run for 30 to 60 seconds. While
the water is running, check for leaks
around and under the sink. Turn the water
off and reattach the aerator, your new
Pacific Bay faucet is ready to use.
MAINTENANCE AND CLEANING
Cleaning Tips: The finish on your product
is designed to retain its beautiful sheen
for years. To maintain the original look of
the finish, a little care and caution should
be used. We recommend the use of mild
soap and water to clean the product.
THE USE OF ABRASIVE CLEANERS MAY
SCRATCH THE FINISH OR CAUSE
OTHER DAMAGE.
RECOMMENDED TOOLS AND
MATERIALS
¨ Adjustable Wrench
¨ Plumbers Tape (Thread Seal
Tape)
BEFORE YOU BEGIN
There are a variety of things to do before
installing any new plumbing system into
your home or residence. Before you begin
work make sure you:
¨ Shut off the main water supply
¨ Cover your drain to prevent
loss of parts
¨ Observed any local plumbing
codes
¨ Inspect fixture for damage -
Replace as necessary
* Pacific Bay reserves the right to make any
revisions in the design of products without
notice.
1. ABS Base (2)
2. ABS Handle (2)
3. POM Bolt (2)
4. Stainless Screws (2)
5. POM Inner Sleeve (2)
6. POM Nut (2)
7. ABS Escutcheon
8. POM/Rubber/Stainless Mandrel (2)
9. Rubber Washer (2)
10. Stainless Spring (2)
11. POM/Rubber Body
12. PP Base Plate
13. Stainless Screw (2)
14. Rubber Washer (2)
15. ABS Mounting Nut (2)
16. Rubber Washer (2)
17. ABS Coupling Nut (2)
18. Rubber O-Ring
19. ABS Outlet
20. Rubber Washer
21. POM Flow Restrictor
22. POM Filter Nut
23. POM Ring
24. Stainless Filter
25. POM Filter Seat
26. ABS Aerator Nut
Escutcheon
Mandrel
Washer
Spring
Body
Base Plate
Washer
Mounting Nut
Washer
Coupling Nut
Washer
Filter
Flow Restrictor
Filter Nut
Filter Seat
Aerator Nut
Ring
ABS
ABS
ABS
ABS
POM
POM
POM
Stainless
Stainless
POM
Rubber
Rubber
Rubber
Rubber
PP
Pom/Rubber
Pom/Rubber/Stainless
1
2
2
2
1
1
2
2
2
2
1
1
1
1
1
1
1
Part ID Material Quantity Description Replacement Part
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
DF-PL700C
ScrewStainless 2
O-Ring
Rubber 1
Outlet
ABS 1
Nut
ABS
ABS
POM
POM
2
2
2
2
2
Stainless
POM 2
Handle
Base
Bolt
Screws
Lnner Sleeve