Pacific Image Electronics RapidScan ST-5 Series User manual

RapidScan ST-5 series
User Manual

Notice:
Please make sure that there are no children around while
using the reader.

1.Installation
•Connect to power
•Press power button to
power on reader
•Login UI will appear
after reader is power on
& activated completely.
USB port x 1
With USB pen-drive user can do data output and
F.W update

2.Login in: input ID/PW to log in

3. Operation UI
Profile selection
Analysis:Click to get Instant
analysis result
Delay Analysis: Can set time
for delay analysis
Image of test
Result columns
T-1: T line value
C: C line value
Result: Positive or Negative or
value depends on setting
Real Time Analysis
Click to activate automatic
analysis.
Setting: to set reader’s
parameters
Support certain type of
USB printer
View and Export data:
Check analysis data history.
Data can be exported
Sample info: Preset
sample information
Channel indication
Indication of channel # of
single or multi channel kit.
Battery status

4. Analysis
Select profile
Select test kit for analysis
Click Analysis or Delay Analysis
Wait for reader to analyze result. Result &
image will be presented within 1 minute.
To check each channel’s result
please click this icon to select
other channel
1/1: means single channel kit
1/3: means 1st channel of 3 channel kit
2/3: mean 2nd channel of 3 channel kit
Real Time Analysis:
When activate “Real Time Analysis”, there is
no need for user to click “Analysis”. Simply
insert the kit into reader and reader would
automatically analyze kit.

5. Setting
About: Present reader’s software and
hardware version
Profile: To import / delete/ calibrate
each profile
Date/Time: Reset date/time here if it
is not correct
User: set authentication of user level
Sleep: LCD screen sleep mode setting
Advanced: Advance setting of reader

Profile: Show current selected profile
USB import: Using USB pen-drive to
import profile.
QRCode Import: Insert QR code card
to reader & press this button to
upload profile
Calibration: Insert calibration chart to
do calibration
Delete: Selected profile would be
deleted by pressing this icon
6. Setting: Profile

7. Setting: USB Import
USB import: Using USB pen-drive to
import profile.
Step 1. Save profile file to your USB
pen-drive under “ini” folder
Step 2. Connect USB pen-drive to
reader,
Step 3. Press “USB Import” to upload
profile
Step 4. You will see the profile in USB
pen-drive showing on reader’s UI
Step 5. Press the profile on UI to finish
upload

8. Setting: Date/Time
Setting Date/Time by pressing each
column

9. Setting: User
User: Present current selected user
account name
Add: Adding new user account
Edit: Editing user account information
such as name, password and login-
level
Delete: Deleting user account

10. Setting: Sleep
Set sleep mode by selecting time
from list. SW includes a list of time
settings, ranging from one minute to
Never.

11. Setting: Advanced
Update F/W: Use USB pen-drive to
update F/W of reader by click this
icon
Network: To set this reader’s
parameters when reader become
Web UI mode
Web UI mode: Go to web UI mode
can let user use cell phone or laptop
to operate reader
Export Debug: Use pen-drive to save
debug data for vendor to do debug
analysis when reader has abnormal
analysis result.

AP Mode
In AP mode, ST5 works as a host. In this condition, your mobile need to open WiFi
and find the network name “RapidPlantsSTD”. After your mobile connect to this
network, you can use your web browser (like Chrome) at your mobile to type in IP
address 192.168.0.1 or you can use IPFinder App to enable the interface of ST5
web server.
①Choose AP mode
②Back to main page, and then
AP mode is well set.
※Do not change these parameters.

Client Mode
It is a client device to connect to your office WiFi router. When the ST5 needs to
connect to internet, we should set it as Client Mode. ST5 can go through your
office WiFi LAN to reach internet.
①
②
③
④
⑤
⑥
Choose the WiFi and
enter the password.
⑦

Client Mode
When finishing setting Client Mode, use IP Finder to locate the IP adress. After that,
users can use the web browser to login.
Click here to search
the device.

12. Database
Date: Select date to search data
^ Arrow: to move menu upward
v Arrow: to move menus downward
Export: Use USB pen-drive to export
select data

13. Power Off
Press Power button
Select “Log Out” to Log in
page
Select “Power Off” to turn off
reader
Select “Back” to resume
operation page

RapidScan ST5-series user manual
Pacific Image Electronics Co., Ltd
7F, No. 239, Sec. 1 Datong Rd., Xizhi Dist., New Taipei City 221, Taiwan
Tel: [phone] (GMT +08:00)
Fax: [phone]
Email: [e-mail]