Pakedge SE-8 User manual

SE-8, SE-8i
8-port Unmanaged Gigabit Switch
QUICK START GUIDE

22
Switch overview
The Pakedge SE-8 and SE-8i are aordable network solutions that deliver high
performance and versatility to your home or oce networks. These deliver eight ports
of gigabit speed and reliability to your basic connected devices and heavy bandwidth
applications, including on-demand streaming, video over IP, and IP camera systems.
Specifications:
Input power 100-240VAC 50-60 Hz
Power supply 9V 600mA (SE-8i includes univeral power adapter)
Switching capacity 16 Gbps
Forwarding rate 11.9 Mpps
LEDs 1× Power, 8× Link/Act
MAC address table 4K
Interface 8× rear-facing 10/100/1000 Mbps auto-negotiation RJ45 ports (auto MDI/MDIX)
Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab
Dimensions (L×W×H) 5.59 × 3.54 × 0.87 in. (142 × 90 × 22.39 mm)
Transfer Method Store and forward
MAC address learning Automatically updated
Operational temperature
Storage temperature
32˚F ~ 113˚F (0˚C ~ 45˚C)
-40˚F ~ 158˚F (-40˚C ~ 70˚C)
Humidity 10% to 90% RH, non-condensing

33
Port
indicators
Power
indicator
Front
Ethernet ports Power port
Back
O No device detected
On Device detected
Blinking Device detected and
active
Features

44
4 3/
32 in.
(104 mm)
Mounting to a wall or cabinet
1 Place the template at the desired mounting location, then mark the location of
the mounting points. The distance between the centerlines of the two mounting
points should be 4 3/
32 in. (104 mm).
2 Install drywall anchors (not included), if needed, at marked locations, then install
the screws into the same locations. Make sure you leave at least a 9/
64 in. (3.5 mm)
gap between the top of the screw head and wall.
3 Line the keyholes on the bottom of the switch with the drywall screws, and hook
the switch onto the drywall screws.
Wall mount template

55
Applications
As a primary switch
Modem/
Internet
RK-1 Router
SE-8 Switch
Devices connected to switch
• Streaming device
• IP phone
• Desktop PC
• IP camera
• Printer

66
As an edge switch
RK-1 Router
SE-8 Switch
SX-24 Managed Switch
Connected devices
• IP camera system
• 3 IP cameras
• IP phone
• NVR
Example: Connect an IP camera
system to the SE-8 or SE-8i

77

Technical Support
For technical help:
www.pakedge.com/portal
[e-mail]
[phone]
For non-technical inquires:
[e-mail]
[phone]
For regulatory information:
www.pakedge.com/regulatory
DOC-00291-B 2017-07-21 MS
11734 S. Election Road
Draper, UT 84020
www.pakedge.com
[email protected]
©2017 Control4. All rights reserved.