Panamax MOD-AT2 User manual

ADVANCED POWER MANAGEMENT SOLUTIONS
Panamax Signal Line Module Family
PRODUCT FAMILY INCLUDES:
• MOD-AT2 • MOD-AT4
• MOD-AT110 • MOD-DT4
• MOD-UTP • MOD-CAT5
• MOD-DBSTV • MOD-SPKP
Modular & Expandable
Application Specific
Signal Line
Protection
Surge
Protect
Noise
Filter
Connected
Equipment
Longevity
Lifetme
Warranty
Applications for:
• Satellite, CATV, Cable /
DSL Modems &
Pay-Per-View Lines
• For Outdoor Speakers,
Keypads & Control Lines
• 10/100/1000 baseT
Ethernet Networks
• Gigabit (1000 baseT)
Ethernet Networks
• Analog Phone System
Protection
• Digital Phone System
Protection
800-472-5555 • www.panamax.com
L545 REV. E
Surges and power problems occur on
any electrical line– including
telephone, modem, cable and
speaker lines just to name a few.
Every signal uses a different amount of
voltage, and each Panamax module
is designed with the specific applica-
tion in mind to protect your equipment
from these dangers while lengthening
the life of your equipment.
Most Panamax Floor Model products
feature some signal level protection
for basic or standard systems, but
each system is unique. Some systems
may require additional signal level
protection pathways – enter the
Panamax family of protection “MODs”.
MODULES ARE ALSO FOR USE WITH ALL:
• PM8-EX’s
• M4-EX’s
• M8-EX’s
• M8-AV’s
• M8-HT’s
• M8-AV-PRO’s

Maximize the longevity of your electronic equipment with Panamax, the key to complete path surge protection!
MOD-AT4
$49.95
MOD-DBSTV - $59.95
MOD-CAT5 - $39.95
MOD-UTP5e - $29.95
MOD-DT4
$49.95
MOD-AT8110
$79.95
MOD-AT2
$29.95
MOD-SPKP - $49.95
1690 Corporate Circle, Petaluma, CA. 94954 • 800-472-5555 • 707-283-5900 Fax [phone] • www.panamax.com
L545 REV. E 5/10
© 2010 Panamax Inc. Panamax and the Panamax logo are registered US trademarks of Panamax. BlueBOLT™ and the BlueBOLT logo are registered US trademarks of Panamax.
Model
MOD-AT2
MOD-AT4
MOD-AT8110
MOD-DT4
MOD-UTP
MOD-CAT5
MOD-SPKP
MOD-DBSTV
Individual Unit
UPC
0 50616 00769 6
0 50616 00770 2
0 50616 00771 9
0 50616 00772 6
0 50616 00773 3
0 50616 00774 0
0 50616 00775 7
0 50616 00776 4
Inner Pack
Qty.
6
6
6
6
6
6
6
6
Inner Pack
Carton Dimensions
7.25" x 6.25" x 5.50" H
13.0" x 11.25" x 5.75" H
13.0" x 11.25" x 5.75" H
13.0" x 11.25" x 5.75" H
7.25" x 6.25" x 5.50" H
7.50" x 6.50" x 5.75" H
13.0" x 11.25" x 5.75" H
13.0" x 11.50" x 6.5" H
Inner Pack
Weight In Pounds
3.25
5.10
4.75
5.10
3.60
4.40
4.40
6.40
Inner Pack
UPC
30 50616 00769 7
30 50616 00770 3
30 50616 00771 0
30 50616 00772 7
30 50616 00773 4
30 50616 00774 1
30 50616 00775 8
30 50616 00776 5
Master Pack
Qty.
24
24
24
24
24
24
24
24
Master Pack
Carton Dimensions
13.0" x 7.50" x 12.0" H
22.5" x 13.5" x 12.0" H
22.5" x 13.5" x 12.0" H
22.5" x 13.5" x 12.0" H
13.0" x 7.50" x 12.0" H
13.25" x 7.75" x 12.25" H
22.5" x 13.5" x 12.0" H
27.0" x 13.5" x 12.5" H
Master Pack
Weight In Pounds
15.0
22.5
21.0
22.5
16.5
20.0
20.0
28.0
Master Pack
UPC
50 50616 00769 1
50 50616 00770 7
50 50616 00771 4
50 50616 00772 1
50 50616 00773 8
50 50616 00774 5
50 50616 00775 2
50 50616 00776 9
UPC’s, Quantities, Weights and Measures for Ordering & Shipping
Designed to protect outdoor speaker,
keypad, control and security wires (8
wires or 4 pairs). Equipment lines that
lead outside the building are pathways
for surges (sometimes called backdoor
surges) to enter the equipment.
*See actual warranty and policy documents for details.
Specifications subject to change without notice due to continuing product updates and improvements.
Designed to protect standard phone
lines connected to computer
modems, telephones, pay-per-view
ports, etc. It will also protect DSL
lines (ADSL, G.Lite) going into the
DSL modem. The MOD-AT2
module will protect a single phone
line using an RJ-11 (2 wire) cord or
a dual phone line using an RJ-14 (4
wire) cord.
SPECIFICATIONS
Telco / DSL Protection:
Fuseless/Auto Resettable___________________Yes
Clamping Level________________________260V
Capacitance___________________30pf pf (approx.)
Suppression Modes_________Metallic & Longitudinal
Wires Protected___________________Pins 3,4,5,6
Connectors___________________________RJ-14
For Analog Phone System Protection - 2 Lines
DSL Modem Compatible
For Analog Phone System Protection - 4 Lines
DSL Modem Compatible
Designed to protect standard
phone lines and DSL (ADSL,
G.Lite) lines. Multiple input &
output jacks provide complete
installation flexibility. Different
cables/connections can be split
or combined to accommodate a
variety of installations.
SPECIFICATIONS
Telco / DSL Protection:
SignalPerfect™ Circuitry___________________Yes
Fuseless/Auto-Resettable___________________Yes
Clamping Level________________________260V
Capacitance____________________30 pf (approx.)
Suppression Modes_________Metallic & Longitudinal
Wires Protected___________________________8
Connectors_________RJ-45, RJ-14, RJ-11 and S110D
SPECIFICATIONS
Telco/DSL Protection:
Fuseless/Auto-Resettable_____________________Yes
Clamping Level___________________________260V
Capacitance_______________________30 pf (approx.)
Suppression Modes___________Metallic & Longitudinal
Wires Protected_____________________________16
Connectors____________________Punchdown S110D
Designed to protect up to 8
standard phone lines using 110
punchdown connectors on both
the input and output.
For 8 Analog Phone Lines Using 110 Punchdown
Connectors DSL Modem Compatible
SPECIFICATIONS
Telco Protection:
Fuseless/Auto-Resettable_____________________Yes
Clamping Level____________________________70V
Capacitance_______________________50 pf (approx.)
Suppression Modes___________Metallic & Longitudinal
Wires Protected_____________________________8
Connectors___________RJ-45, RJ-14, RJ-11 and S110D
Designed to protect Digital Station
(DS) Set phone lines. Station Set
lines that leave the building are a
pathway for surges (backdoor) to
enter the phone system. Multiple
input & output jacks provide
complete installation flexibility.
Different cables/connections can
be split or combined to
accommodate a variety of
installations.
For Digital Phone System Protection - 4 Lines
SPECIFICATIONS
LAN Protection:
Compatability___________________________10/100/1000bT
Clamping Level________________62 ± 6 V, all pins, plus ground
Suppression Modes____________Differential & Common Ground
Wires Protected______________________________Pins 1-8
Connectors___________________________________RJ-45
CAT5E Compliant________________________________Yes
Designed to protect networked computer
equipment. It will protect one Ethernet
10/100/1000 Base-T, Token Ring, Arcnet, or
AppleTalk network line.
For 10/100/1000baseT Ethernet Networks
SPECIFICATIONS
Telco Protection:
Clamping Level_________________________19V @ 1mA
Capacitance_________________________________<6pf
Suppression Modes_________Differential & Common Ground
Wires Protected___________________________Pins 1-8
Connectors________________________________RJ-45
CAT5E Compliant______________________________Yes
Designed for high-speed data
applications-networks including CAT 5, fast
Ethernet, ATM, and other high-speed active
transport devices up to 100 MHz per pair.
For Gigabit (1000baseT) Ethernet Networks
SPECIFICATIONS
Telco / DSL Protection:
Fuseless/Auto-Resettable___________________________Yes
Clamping Level________________________________260V
Capacitance ____________________________30 pf (approx.)
Suppression Modes_________________Metallic & Longitudinal
Wires Protected________________________1 Pair (Pins 4, 5)
Connectors___________________________________RJ-11
Universal Satellite Protection:
Shielded______________________________________Yes
Clamping Level_________________________________75V
Frequency Range_________________________0MHz- 2.2GHz
Insertion Loss________________________________<0.5dB
Connectors_______________________Gold Plated Female “F”
Designed to protect 2 satellite lines, 1 cable
TV or antenna line, and 1 telephone line.
For Satellite, CATV, Cable / DSL Modems For Outdoor Speakers, Keypads and Control Lines
SPECIFICATIONS
Signal Line Protection:
Clamping___________________________________ 47V
Modes Protected_________________All Terminals to Ground
Wires Protected_________________________________8
Per Wire Capacity____________________________7 Amp
Wire Size_____________________________ 12 AEG Max.
Connectors____________________ 8 Wire Screw Terminals
Screw Terminals_____________Compatible w/ 12 Gauge Wire
Power Handling Capacity for Outdoor Speakers;
225 Watts per Channel for 4 Ohm Speakers
450 Watts per Channel for 8 Ohm Speakers
General: For all Modules
Lightning Protection_____________________________Yes
Product Warranty______________________ Limited Lifetime
Mounting Hardware Included_______________________Yes
Specifications subject to change without notice due to continuing product updates and improvements.
NETWORK
LINE
OUTDOOR
SPEAKER
PHONE
SYSTEM
PHONE
LINE
SATELLITE
LINE
CABLE
COAX
LINE
AC LINE
COMPUTER
RECEIVER
PHONE 1
PHONE 2
SATELLITE
RECEIVER
TV
MODULES
ARE FOR USE
WITH ALL:
• PM8-EX’s
• M4-EX’s
• M8-EX’s
• M8-AV’s
• M8-HT’s
• M8-AV-PRO’s
PROPERLY
GROUNDED
AC OUTLET
MOD-DBSTV
BASE UNIT
MOD-AT4
MOD-SPKP
MOD-UTP5e
SIGNAL LINE PROTECTION EXAMPLES