Panasonic CS-L72JD1R5 User manual

Operating Instructions
Air Conditioner
Indoor Unit Outdoor Unit
© Panasonic HA Air-Conditioning (M) Sdn. Bhd. 2008.
Unauthorized copying and distribution is a violation
of law.
MFL6204850
CU-L72JD1R8
CS-L72JD1R5
3
• Please read these operating instructions carefully and thoroughly
before installing and operating your air conditioner.
• Please retain these operating instructions for future reference
after reading them thoroughly.
IMPORTANT

.
When the air conditioner is not going .......... .
2
Operating Instructions...................... 8
26
26
26
27
27
27
28
6.
5.
4. Filter..........................................
2.

and earth leakage current breaker.
3
There is a risk of electric shock.
There is risk of fire or electric shock. There is risk of fire or electric shock. There is risk of fire or electric shock due to
dust, water ect.
There is risk of fire or electric shock.
There is risk of fire and electric shock. There is risk of fire,failure of the producr, or
electric shock.
It may cause product to fall.
Otherwise it may cause a fire or electrical
shock.
Incorrect refrigerant used can prevent the
normal operation of the unit.
The falling outdoor unit can cause damage or
injury or even death of a person.
There is risk of fire or electric shock.
There is risk of electric shock or fire.
There is risk of fire.
There is risk of fire or electric shock. There is risk of fire, electric shock, explosion,
or injury.
There is risk of fire or electric shock. Otherwise it can cause electric shock or fire.

4

OPERATING TEMPERATURE( C) - Inverter Model
COOLING MODE
ROODTUOROODNI
.NIM.XAM.NIM.XAM
32° 12C° 34C°
10-
C°C
HEATING MODE
ROODTUOROODNI
.NIM.XAM.NIM.XAM
30° 01C° 42C° 01-C°C
°
5

ZONE1 ZONE2 ZONE3 ZONE4
AUTOINDOOR REMO
ZONE1 ZONE2 ZONE3 ZONE4
2TH
REMO
AUTOINDOOR
Wired Remote
Controller
3
Name and function of parts
6

Wired Remote Controller
Name and Function of Remote Controller
❊Some functions may not be operated and displayed depending on the product type.
7
OPERATION INDICATION
SCREEN
SET TEMPERATURE Button
VENTILATION Button (not working)
OPERATION MODE SELECTION
Button
SUBFUNCTION Button(not working)
FUNCTION SETTING Button
EXIT Button
ON/ OFF Button
ROOM TEMPERATURE Button
FAN SPEED Button
AIR FLOW Button(not working)
RESERVATION/ TIME SETTING
Button
SETTING/ CANCEL Button
UP, DOWN, LEFT, RIGHT Button
RESET Button
1
2
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
7
6
5
315
14
13
12
11
10
9
8

Cooling Mode - Standard Operation
Press button to turn on the
indoor.
1
Press button to select
Cooling operation mode.
2
Adjust the desired temperature
by pressing buttons.
Press button to check the
Room temperature.
When setting the desired
temperature higher than room
temperature, only ventilation
wind is blow out instead of
cooling wind.
3
Operating instructions
❖ Setting Temp Range : 18˚C~30˚C (64˚F~86˚F)
8

Heating Mode
Press button to turn on the
indoor.
1
Press button to select
Heating mode.
2
Adjust the desired temperature
by pressing buttons.
When setting the desired
temperature lower than room
temperature, there is only
ventilation wind.
3
❖ Setting Temp Range : 16˚C~30˚C (60˚F~86˚F)
9

Dehumidification Mode
Press button to turn on the
indoor.
1
Press button to select
Dehumidification mode.
The temperature setting can not
be adjusted during operation
this mode.
2
Press the button to select
airflow rate
3
In rainy season or high humidity climate, it is possible
to operate simultaneously dehumidifier and cooling
mode to remove humidity effectively.
Press button to turn on the
indoor.
1
Press button to select Auto
Changeover Mode.
2
The setting temperature as
the right side picture can be
set in both cooling/ heating
model.
3
Auto Changeover Mode
❖ Setting Temp Range : 18˚C~30˚C (64˚F~86˚F)
01
LO →MED →HI