Panasonic CS-PE9DKE User manual

CS/CU-PE9DKE
CS/CU-PE12DKE
Air Conditioner
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-techical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the product or products dealt with in this service information by anyone else could result in serious injury or death.
1 Features 2
2 Functions 3
3 Product Specifications 6
4 Dimensions 10
5 Refrigeration Cycle Diagram 12
6 Block Diagram 13
7 Wiring Diagram 14
8 Operation Details 15
9Installation instructions 41
10 Installation and Serving Air Conditioner Using R410A
11 Disassembly of The Parts
12 Troubleshooting Guide
13 Technical Data
14 Exploded View
15 Replacement Parts List
16 Exploded View
17 Replacement Parts List
18 Electronic Circuit Diagram
CONTENTS
Page Page
Order No.
Guangzhou Matsushita Air Conditioner Co., Ltd.
(GMAC) All rights reserved. Unauthorized copying
and distribution is violation of law.
C
R
50
62
65
67
68
69
70
71
72
------------------------------------------------------
--------------------------------------------------------
------------------------------------------
-----------------------------------------------------
-----------------------------------
--------------------------------------------------
-------------------------------------------------
-----------------------------------------------
---------------------------------------------------
--------------------------------------
----------------------------------------
--------------------------------------------------
--------------------------------------------------
-----------------------------------------
--------------------------------------------------
-----------------------------------------
--------------------------------------
R
GMAC0506048C3
hr
DELAY
hr
DELAY
OFF ON
SELECT SET/CANCEL
ERROR RESET
ON OFF
INVERTER
AUTO
HEAT
COOL
DRY
OFF

2
1 Features
High Efficiency
Air Quality Indicator
Auto Restart Control
Automatically restart after power failure
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
Enviromental Friendly (For Refrigerant : R410A Model)
12-hour Timer Setting
Zero ozone depleting potential and low global
warming potential by using R410A refrigerant.
Comfort Environment
Air filter with function to reduce dust and smoke
Breakdown Self Diagnosis function
Removable and washable Front Panel
Delay ON Timer and OFF Timer

Operation START/STOP
Operation Mode Selection
Automatic Operation
Heating Mode Operation
Cooling Mode Operation
Soft Dry Mode Operation
Mode
Indoor Fan Speed Selection
Low Speed
Med- Speed
High Speed
Automatic Speed
Airflow Direction Control
Horizontal Airflow Direction Control
-Auto Control
-Manual Control
Vertical Airflow Direction Manual Control
Room Temperature Setting
Temperature Setting(16 to 30 )
Auto Operation
Timer Operation Selection
Stop/Start Operation Control
(set the ON/OFF Timer hourly later)
Set /Cancel Timer Operation
Set timer/Cancel the set timer
2 Functions
Remote Control
3
OFF/ON
MODE
FAN
SPEED
AIR
SWING
TEMP
TIMER
OFF/ON
TIMER
SET/
CANCEL
Turn on/off the air conditionor
When stop the operation by pressing
OFF/ON button,the cursor key points
to OFF.
By pressing SET button for 5seconds
continuously to switch to set the sensor
sensitivity.
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
hr
DELAY
hr
DELAY
OFF ON
SELECT SET/CANCEL
ERROR RESET
ON OFF
INVERTER
AUTO
HEAT
COOL
DRY
OFF
Med Speed
Med+ Speed
CHECK
Check Point
Self diagnosis function
RESET
Reset Point
ERROE
RESET
ERROE Reset Point
Clear memory data
To reset the indoor unit.
Time Changing Button
Change the setting time.
A,B

Indoor Unit
Force Cooling Operation
When the remote control cannot be used or
for repairing and testing ,please use this
button.
Power Switch ON/OFF
Operation Indication Lamps
Power (green)
Timer(orange)
Lights up in operation;
Blinks during Hot Start
operation and
determining Auto
Operation mode
Operation Mode
Cooling/Heating/Soft Dry /Auto Operation
Time Delay Safety Control
The unit will restart operation in 3-4
minutes after each pause.
4
Keep pressing this button for 5 seconds to start
the force cooling operation.
Auto Switch
Button
Air quality
Green
Orange
Red
Anti-freezing Control for the Evaporator
Cooling or Soft Dry Operation
Warm Booting Control
Indoor fan starts running when indoor
piping reaches 19 or above.temperature
High,Med+, Med, Med-,Low
Auto Fan Speed
Indoor Fan Speed Control
Automatic Airflow Direction Control
The louver automatically swings up and down
Five Manual Airflow Direction Control
Airflow Direction Control
Delayed On-timer Control
For cooling or soft dry mode, the unit
starts 15 minutes before the set time with
the remote control, but for heating mode
30 minutes before the set time.
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
Force Heating Operation
Keep pressing this button for 8 seconds to start
the force heating operation.
Signal Receiving Sound
Keep pressing this button for 16 seconds to turn
off or turn on the signal receiving sound or
H14 Abnormality Detection Mode.
Light up in Timer Setting.
Blinks in Self Diagnosis Control
Automatic Restart Control
Operation is restarted after power failure
at previous setting mode.
Different Remote Controlling Setting
Keep pressing this button for11 to change
different remote controlling setting(A B)
Mode.

Outdoor Unit
5
Panasonic
Overload Protector
Inner protector
Once the compressor is activated, it does not
stop within 30 seconds. It stops immediately with
remote control ON/OFF button.
4-way Valve Control
If the unit is stopped during Heating
Operation, the 4-way valve will remain in
heating mode operation for 3 minutes.
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
Total Running Current Control
30 Seconds Forced Operation Control
Deice Operation

6
3 Product Specifications
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
Cooling Capacity
Heating Capacity
Moisture Removal
Power Source
Airflow Method
Air Circulation Indoor Air (low)
Indoor Air (medium)
Indoor Air (high)
Outdoor Air
Noise Level
Electrical
Data
Piping Connection Port(Flare piping)
Piping Size(Flare piping)
Drain Hose
Power Supply Cord Length
(Number of core-wire)
Dimensions
Net Weight
Compressor
Air Circulation
Unit
kW
kW
L/h
Phase
V
Cycle
m /min
3
m /min
3
m /min
3
m /min
3
dB(A)
W
A
W/W
A
Input
Running Current
EER/COP
Starting Current
Inner Diameter
Length
Height
Width
Depth
Type
Motor Type
Rated output
type
Motor type
Fan
Speed
Low
Med
High
Rated Output
Input
Inch
Inch
Inch
Inch
mm
m
mm
mm
mm
kg
W
W
W
rpm
rpm
rpm
CS-PE9DKE CU-PE9DKE
2.50(0.90-3.00)
3.30(0.90-4.00)
-
Single
230
50
-
-
-
-
Cooling:high46
Heating:high47
Cooling:high42,Low27
Heating:high42,Low27
Cooling:730(190-1000)
Heating:820(170-1110)
Cooling:3.4
Heating:3.7
Cooling:2.95(2.58-4.05)
Heating:3.46(3.10-4.53)
3.7
G:half union3/8"
L:half union1/4"
G:gas side3/8"
L:liquid side1/4"
G:3-way valve3/8"
L:2-way valve1/4"
G:gas side3/8"
L:liquid side1/4"
-
-
-
-
-
-
m3 core-wire/1.5mm2
280
799
183
8
540
780
289
30
-
-
Cross-flow fan
-
30
Rotary(1 cylinder)
Rolling piston type
Induction(6 poles)
650
Propeller fan
Induction(6 poles)
-
15
-
840 60
1080 60
1370 60
-
670 60
12
0.65
1.9
6
7.7
9.8
OUTLET
INTAKE
SIDE VIEW TOP VIEW
22.5
Induction(8poles)
-

7
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
Heat
Exchanger
Description
Tube Material
Fin Type
FPI
Refrigerant Control Device
Refrigeration Oil
Refrigerant (R410A)
Thermostat
Protection Device
Capillary
Air Filter
Refrigerant Circulation Control Device
Fan Motor Capacitor
Unit CS-PE9DKE CU-PE9DKE
Length
Circulation
Inner Diameter
mm
(c.c)
g
mm
L/min
mm
F,V
Evaporator
Copper
Slot type
(Plate fin configuration,forced draft)
2x15 1X24
Condenser
Copper
Corrugation type
20
610x252x25.4
-
-
-
-
-
-
-
Electronic Control
P.P. Honeycomb
18.5
Capillary Tube
840
sensor
Inner protector
600 10
8.15 0.2
1.3
F,1.2 450V
Specifications are subject to change without notice for further improvement.
Dimensions
Rows/Stage
Capillary
RB68A or Freol Alpha68M
726x504x18.2

8
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
Cooling Capacity
Heating Capacity
Moisture Removal
Power Source
Airflow Method
Air Circulation Indoor Air (low)
Indoor Air (medium)
Indoor Air (high)
Outdoor Air
Noise Level
Electrical
Data
Piping Connection Port(Flare piping)
Piping Size(Flare piping)
Drain Hose
Power Supply Cord Length
(Number of core-wire)
Dimensions
Net Weight
Compressor
Air Circulation
Unit
kW
kW
L/h
Phase
V
Cycle
m /min
3
m /min
3
m /min
3
m /min
3
dB(A)
W
A
W/W
A
Input
Running Current
EER/COP
Starting Current
Inner Diameter
Length
Height
Width
Depth
Type
Motor Type
Rated output
type
Motor type
Fan
Speed
Low
Med
High
Rated Output
Input
Inch
Inch
Inch
Inch
mm
m
mm
mm
mm
kg
W
W
W
rpm
rpm
rpm
CS-PE12DKE CU-PE12DKE
3.15(0.90-3.80)
4.10(0.90-5.00)
-
Single
230
50
-
-
-
-
Cooling:high48
Heating:high50
Cooling:high42,Low30
Heating:high42,Low33
Cooling:900(190-1270)
Heating:1110(170-1410)
Cooling:4.2
Heating:4.9
Cooling:2.98(2.57-4.05)
Heating:3.18(3.07-4.53)
4.9
G:half union3/8"
L:half union1/4"
G:gas side3/8"
L:liquid side1/4"
G:3-way valve3/8"
L:2-way valve1/4"
G:gas side3/8"
L:liquid side1/4"
-
-
-
-
-
-
-
m3 core-wire/1.5mm2
280
799
183
8
540
780
289
34
-
-
-
Cross-flow fan
-
30
Rotary(1 cylinder)
Rolling piston type
Induction(6 poles)
650
Propeller fan
Induction(6 poles)
-
25
-
950 60
1170 60
1380 60
-
770 60
27.4
12
0.65
1.9
6.8
8.4
9.9
OUTLET
INTAKE
SIDE VIEW TOP VIEW
Induction(8poles)

9
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
Specifications are subject to change without notice for further improvement.
Heat
Exchanger
Description
Tube Material
Fin Type
FPI
Refrigerant Control Device
Refrigeration Oil
Refrigerant (R410A)
Thermostat
Protection Device
Capillary
Air Filter
Refrigerant Circulation Control Device
Fan Motor Capacitor
Unit CS-PE12DKE CU-PE12DKE
Length
Circulation
Inner Diameter
mm
(c.c)
g
mm
L/min
mm
F,V
Evaporator
Copper
Slot type
(Plate fin configuration,forced draft)
2x15 2X24
Condenser
Copper
Corrugation type
20
610x252x25.4
-
-
-
-
-
-
-
Electronic Control
P.P. Honeycomb
17
Capillary Tube
1020
-
Inner protector
300 10
11.3 0.2
1.3
F,1.8 450V
Dimensions
Rows/Stage
Capillary
X504x18.2
726
696
565 20
12.3 0.2
1.5
RB68A or Freol Alpha68M

4 Dimensions
10
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
Indoor Unit
BA
254
(631)
(382) (118)
(131)
95
(420) (50)
Front View
<Back View> Installation Plate Hook
Gas Side
Liquid
Side
Drain Port
Air intake
280
Side view
183
Air outlet
Left Piping
Hole
Right Piping
Hole
(100)
141
17.1
57
Unit:mm
Installation plate (Front View)
CS-PE9DKE
CS-PE12DKE
hr
DELAY
hr
DELAY
OFF ON
SELECT SET/CANCEL
ERROR RESET
ON OFF
INVERTER
AUTO
HEAT
COOL
DRY
OFF

Outdoor Unit
CU-PE9DKE
Unit : mm
CU-PE12DKE
11
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
10cm
or more
10cm
or more
100cm
or more
48
18.6
INVERTER
780 57
570
289
<Top View>
105

CS/CU-PE9DKE
CS/CU-PE12DKE
5 Refrigeration Cycle Diagram
12
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
INDOOR UNIT
INTAKE AIR
SENSOR PIPING
SENSOR
HEAT EXCHANGER
(EVAPORATOR)
Cooling
Heating
GAS SIDE
3-WAY VALVE
LIQUID
SIDE 2-WAY
VALVE
OUTDOOR UNIT
CAPILLARY TUBE C3
CAPILLARY TUBE C1
CAPILLARY TUBE C2
OUTDOOR AIR
SENSOR
HEAT EXCHANGER
(CONDENSOR)
4-WAY VALVE
COMPRESSOR
PIPING
SENSOR
COMPRESSOR
SENSOR

CS-PE9DKE/CU-PE9DKE CS-PE12DKE/CU-PE12DKE
FM
FM FM
2
3
OUTDOOR UNIT
INDOOR UNIT
THERMAL
FUSE
4-WAY VALVE
REACTANCE
6 Block Diagram
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE

CS-PE9DKE/CU-PE9DKE
7 Wiring Diagram
14
CS-PE12DKE/CU-PE12DKE
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
(RED)
(BLUE)
(YELLOW)
GRY
GRY
+
-+
-
+
+
AC-WHT
(WHITE)
AC-BLK
(BLACK)
DATA
(RED)
BL WR
CT101
G
G
CN-TH
(WHITE)
CN-TANK
(WHITE)
3
4
1
3
Fan Motor
Y
Y
N
P
++
FUSE2
T3.14A L250V
REACTOR
OUTDOOR UNIT
POWER SUPPLY CORD
BR BL
R
B
FUSE
T 2.5A L 250V
AUTO SW
CN-DISP
(Y)
CN-STM
(W)
CN-TH
(Y)
CN-FM
(W)
R
BL
W
B
Y
ELECTRONIC
CONTROLLER
(DISPLAY,RECEIVER)
SENSOR
(PIPING TEMP.)
BR
R
O
Y
P
MOTOR
MOTOR
ELECTRONIC
CONTROLLER
(MAIN)
3
WIRELESS REMOTE CONTROL
3
W
U-V
U-W
V-W
L6LAHAG00001
T
TERMINAL
FUSE
1
2
SENSOR
(PIPING TEMP)
SENSOR
(AIR TEMP)
SENSOR
(COMP. TEMP)
COIL COMP
(4-WAY VAVLE)
R
B
Y
COMPRESSOR
Y/G
YY
B
B
CAPACITOR Fm2
Fm1
TERMINAL
Y/G
COMPRESSOR TERMINAL
YELLOW
RED
BLUE
TRADE MARK
INDOOR UNIT
W
W
W
W
W
W
W
W
W
W
CN-DISP
(W)
CU-PE9DKE CU-PE12DKE
CONNECTING
Y-B M
Y-R A
OUTDOOR FAN MOTOR RESISTANCE( )
COMPRESSOR RESISTANCE( )
CONNECTING
L6LAJAG00001
290
287
CU-PE9DKE CU-PE12DKE

15
8 Operation Details
8.1 Operation and Display of Remote Controller
Original Setting
ON/OFF Button
ON/OFF Switch
Signal Transmitting
Indoor Indicator
Green
Mode Selecting Button
1.Function and Display of the button:
AUTO, HEAT, COOL, DRY can be selected by pressing the button. Initial display of LCD is as follow
MODE SET TEMP FAN SPEED AIR SWING
AUTO
HEAT
COOL
DRY
25
20
28
25
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
Keeping the button depressed continuously, the operation mode will change as
AUTO
HEAT
COOL
DRY
hr
DELAY
hr
DELAY
OFF ONON OFF
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
AB
OFF
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE

Single press
Mode Selecting Button
LCD of Remote Control
HEAT
AUTO
t500ms
Keep depressed( less than 500ms)
LCD of Remote Control
Signal Transmitting
HEAT
AUTO
t500ms
2.Shift time of the Mode selection button
COOL DRY
Keep depressed continuously
LCD of Remote Control
T1 T T T T2
T1=1s T=250ms
T2 250ms t 500ms
If the ON/OFF button is pressed after the operation mode is set, or change the operation mode during operation,
or the signal is received from the remote controller, the indoor indicator will flash or light up to start the operation.
Fan Speed Button
1.The display on the remote controller changes as follow by pressing the AIR SWING button.
2.If the ON/OFF button is pressed after the fan speed mode is set, or change the fan speed mode during operation,
or the signal is received from the remote controller, the indoor indicator will flash or light up to start the operation.
3.The shift time of the fan speed button is the same to that of mode selecting button.
HEAT
AUTO COOL DRY HEAT AUTO
Signal Transmitting
Signal Transmitting
Mode Selecting Button
Mode Selecting Button
AUTO
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
16

Temp Adjusting Button
1.Press this button to change the set temperature
Increase the set temperature(Max.30 )
Decrease the set temperature(Min.16 )
2.If the ON/OFF button is pressed after temperature is set, or change the temperature during operation,
or the signal is received from the remote controller, the indoor indicator will flash or light up to start the operation.
Timer Set Button
1.The Function of the Timer-Setting Button
1) SELECT Button
2) Timer Selecting Button A and B
3) SET/CANCEL Button
The set time can be changed with manner of 1,2,3,4,5,6,7,8,9,10,11,12,1,2,3,4... By pressing the buttons.
Pressing the button A can change the time for ON Timer and OFF Timer, off time for OFF-ON Timer, on time for
ON-OFF Timer; Pressing the button B can change the time for on time for OFF-ON Timer and off time for
ON-OFF Timer setting.
Pressing the button to set or cancel the set timer during the timer setting or activate the previous timer setting.
After the timer setting is determined, “ON” or “OFF” will stop flashing. If the timer setting is cancelled, “ON” or
“OFF” will disappear on the remote control display.
The time on the remote control will change every hour.
OFF Timer and OFF- ON Timer can only be set during the operation;
Timer setting can operate only once.
If the OFF/ON button on the remote control or the AUTO Switch on the indoor unit is pressed, the timer setting
will be cancelled.
If Auto Restart Control occurs , timer setting will be cancelled.
During the operation, if the ON Timer or ON-OFF Timer is set, the operation will be stopped.
When the airconditioner is in operation
OFF Timer Setting Exit Timer SettingOFF-ON Timer Setting
hr
DELAY
OFF
AB
hr
DELAY
hr
DELAY
OFF ON
AB
When the airconditioner is turned off.
Make sure that the cursor key on the display of remote control points to OFF .
ON Timer Setting
hr
DELAY
hr
DELAY
ON OFF
AB
hr
DELAY
ON OFF
AB
Eixt Timer SettingON-OFF Timer Setting
Notes:
FAN
SPEED
AIR
SWING
By pressing this button for 5 seconds continuously, the number indicating the air quality sensor sensitivity will
appear in the remote control display. Then press or button to increase pr decrease the sensitivity.
Indicate
Sensitivity
0123
Turn off the air quality Normal Standard hight
2
1
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
17

2.Timing Chart of Timer-Setting
1:During timer operation changing the set time.
2:During timer operation press the ON/OFF button to cancel the OFF-Timer and the timer indicator on
the indoor unit will go off.
Timer Indicator
Remote Control LCD
Operation Indicator
Indoor Unit
3 hours later OFF
1
2 hours
OFF Timer Setting
1) OFF Timer
3 hours 2
Initial Time Changed Time
Timer Indicator
Remote Control LCD
Operation Indicator
Indoor Unit
5 hours later ON
ON Timer Setting
5 hours
Initial Time Changed Time
Preparation for operation
OFF/ON Button
2) ON Timer
About Cursor Key Which Points To “OFF” On Remote Control
PRESS "OFF/ON" BUTTON
When the ON/OFF button on the remote control is pressed, the cursor key which points to “OFF” will appear or
disappear to indicate the ON/OFF status of the air conditioner.
FAN
SPEED
AIR
SWING
1.
2.
The air conditioner is running but the cursor key which points to “OFF” appears. The air conditioner can be
stopped with any button (Except for “ON/OFF”, “TIMER SET”, “TIMER ON”) pressed.
The air conditioner is on standby, but the cursor key which points to “OFF” disappears. The air conditioner can
be started with any button(Except for “ON/OFF”, “TIMER SET”, “TIMER OFF”) pressed.
For some reason (Ex. The signal of the remote control does not reach the signal receiver of the indoor unit.), the
display of the remote control will not correspond with the actual ON/OFF status of the indoor unit:
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
18

The airflow direction will change as below by pressing the AIR SWING button.
AUTO
Airflow Direction:
Display of Diagnosis
Refer to Diagnosis section.
Change the Code of Remote Controller
Change the code of remote controller by joining or cutting jump wire on the remote controller and indoor PCB.
Four codes(A,B,C,D) can be selected.
JB
Inside the battery box of
remote controller.
On indoor PCB
J----B
Indoor PCB
Short Open
AB
C D
Short
Open
Air Swing Button
8.2 Operation and Display of Indoor Unit
AUTO Operation Switch
SW ON
AUTO
Operation
Forced
COOL
Forced
HEAT
Various Setting
Mode
Individual
Counter-action
Number of beep 12
34
5s 8s 11s 16s 21s
Function
1. When the switch is pressed between 0 to 5 seconds, Auto Mode operation starts to function.
2. When the switch is pressed between 5 to 8 seconds, the unit is forced to operate in Cooling Mode.
3. When the switch is pressed between 8 to 11 seconds, the unit is forced to operate in Heating Mode.
4. When the switch is pressed between 11 to 16 seconds and together with the signal from the remote controller,
the unit can be changed to different controlling setting .
5. When the switch is pressed between 16 to 21 seconds, either H14 error detection selection mode or remote
controller’s signal receiving sound can be cancelled or turned on.
6. If the intake air temperature is less than 16 and the Forced Cooling is activated, because the prior operation
mode is heating, the compressor will stop for 3 minutes to start the Forced Cooling operation.
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
19

Indoor Unit Indicator
Operation
(Green)
Timer
(Orange)
ON OFF FLASH
Run Stop Hot start, deice control,
mode judging and ON-
Timer Operation detecting.
Timer set Timer not set Malfunction happens.
Air Quality
(Green
Orange
Red )
The air quality can be detected automatically by the air quality sensor and shown
by the color of the air quality indicator as bellow..
Color of indocator :Green Air qualuty: Normal
Orange Poor
Red Bad
Indoor Fan Motor Control
1. Basic Fan Speed
Fan speed is determined by the setting of the remote control. And W5~W6 can be calculated
according the equations below:
Those operation modes W4:Low , W8 : Hi , W10 have been regulated in the EEPROM data.
Me- : W5=W4+W10
Me : W6=W5+W10
Me+ : W7=W6+W10
Cool.Dry
REMOTE
CONTROL
FAN SPEED
ROTATING
SPEED
SHI HI Me Me- Lo- Slo Sslo
W9C W8C Calculated W4C W2C W1C
REMOTE
CONTROL
FAN SPEED
ROTATING
SPEED
SHI HI Me Me- Lo Lo- Slo Sslo
W8W W4W W3W W2W W1W
Heat
8.3 Common Features
W3C
Lo
Calculated
Me+
Me+
CS-PE9DKE / CU-PE9DKE / CS-PE12DKE / CU-PE12DKE
20