Panasonic CS-RE9NKR User manual

© Panasonic Appliances Air-Conditioning
(Guangzhou) Co., Ltd. 2012. Unauthorized
copying and distribution is a violation of law.
ENGLISH
Before operating the unit, read these operating
instructions thoroughly and keep them for future
reference.
F568478
Operating Instructions
Air Conditioner
Indoor Unit Outdoor Unit
CS-RE9NKR CU-RE9NKR
CS-RE12NKR CU-RE12NKR
OperatingInstructions
AirConditioner
IndoorUnit OutdoorUnit
CS-RE9NKR CU-RE9NKR
CS-RE12NKR CCU-RE12NKR
PrintedinChina
F568478
F1204-00
MODE
AUTO HEAT
DRY COOL
Selectthedesired mode.
1
OFF/ON
Start/stoptheoperation.
2
TEMP
Selectthedesired temperature.
3
QuICkguIDE
RemoteControlPreparation
1
Removethebattery cover
2
InsertAAAor R03 batteries (can be used ~ 1 year)
3
Closethecover
2
1
3
21
3
QUICK GUIDE
ANTI-BACTERIALFILTER
F568478_cover.indd 1 2012-5-28 16:45:02

2
* DBT: Dry bulb temperature
* WBT: Wet bulb temperature
TABLE OF CONTENTS
SAFETY PRECAUTIONS ................................................................................................................3~4
REMOTE CONTROL .......................................................................................................................5~6
INDOOR UNIT.......................................................................................................................................7
TROUBLESHOOTING..........................................................................................................................8
INFORMATION .....................................................................................................................................9
PRODUCT SPECIFICATION ............................................................................................................. 10
QUICK GUIDE...............................................................................................................BACK COVER
ENGLISH Thank you for purchasing Panasonic Air Conditioner
NOTE: The illustrations in this manual are for explanation purposes only and may differ from the actual unit. They are
subjected to change without notice for future improvement.
OPERATION CONDITION
Use this air conditioner under the following temperature range
Temperature (°C) Indoor Outdoor
*DBT *WBT *DBT *WBT
COOLING Max. 32 23 46 26
Min. 16 11 16 11
HEATING Max. 30 - 24 18
Min. 16 - -5 -6
F568478_EN_CS5.indd 2 2012-5-28 16:34:29

3
ENGLISH
SAFETY PRECAUTIONS
To prevent personal injury, injury to others, or property
damage, please comply the following.
Incorrect operation due to failure to follow instructions below
may cause harm or damage, the seriousness of which is
classied as below:
WARNING
This sign warns of death or serious injury.
CAUTION
This sign warns of injury or damage to property.
The instructions to be followed are classied by the following
symbols:
This symbol denotes an action that is
PROHIBITED.
These symbols denote an action that is
COMPULSORY.
WARNING
INDOOR UNIT AND OUTDOOR UNIT
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
Please consult authorized dealer or specialist to
clean the internal parts, repair, install, remove
and reinstall the unit. Improper installation and
handling will cause leakage, electric shock or re.
Conrm to authorized dealer or specialist on
usage of specied refrigerant type. Using of
refrigerant other than the specied type may
cause product damage, burst and injury etc.
Do not install the unit in a potentially explosive
or ammable atmosphere. Failure to do so could
result in re.
Do not insert your ngers or other
objects into the air conditioner indoor
or outdoor unit, rotating parts may
cause injury.
Do not touch the outdoor unit during lightning, it
may cause electric shock.
Do not expose yourself directly to cold air for a
long period to avoid excess cooling.
Do not sit or step on the unit, you
may fall down accidentally.
REMOTE CONTROL
Do not allow infants and small children to play
with the remote control to prevent them from
accidentally swallowing the batteries.
POWER SUPPLY
Do not use modied cord,
joint cord, extension cord or
unspecied cord to prevent
overheat and re.
To prevent overheating, re or electric shock:
• Do not share the same power outlet with other
equipment.
• Do not operate with wet hands.
• Do not over bend the power supply cord.
•Do not operate or stop the unit by inserting or
pulling out the power plug.
Air Inlet
Air Outlet
Air Inlet
Remote
Control
Power
Supply
Indoor
Unit
Outdoor
Unit
Air Outlet
F568478_EN_CS5.indd 3 2012-5-28 16:34:31

4
CAUTION
INDOOR UNIT AND OUTDOOR UNIT
Do not wash the indoor unit with water,
benzene, thinner or scouring powder to avoid
damage or corrosion at the unit.
Do not use for preservation of precise equipment,
food, animals, plants, artwork or other objects.
This may cause quality deterioration, etc.
Do not use any combustible equipment in front
of the airow outlet to avoid re propagation.
Do not expose plants or pet directly to airow to
avoid injury, etc.
Do not touch the sharp aluminium n,
sharp parts may cause injury.
Do not switch ON the indoor unit when waxing
the oor. After waxing, aerate the room properly
before operating the unit.
Do not install the unit in oily and smoky areas to
prevent damage to the unit.
Do not dismantle the unit for cleaning purpose
to avoid injury.
Do not step onto unstable bench when cleaning
the unit to avoid injury.
Do not place vase or water container on the
unit. Water may enter the unit and degrade the
insulation. This may cause an electric shock.
Do not open window or door for long time during
COOL mode operation.
Ensure drainage pipe is connected properly and
keep drainage outlet clear of gutters, containers
or does not immersed in water to prevent water
leakage.
After a long period of use or use with any
combustible equipment, aerate the room
regularly.
After a long period of use, make sure the
installation rack is not deteriorate to prevent the
unit from falling down.
REMOTE CONTROL
Do not use rechargeable (Ni-Cd) batteries.
It may damage the remote control.
To prevent malfunction or damage of the remote
control:
• Remove the batteries if the unit is not going to
be used for a long period of time.
• New batteries of the same type must be
inserted following the polarity stated.
POWER SUPPLY
Do not pull the cord to disconnect the plug to
prevent electric shock.
WARNING
POWER SUPPLY
If the supply cord is damage, it must be
replaced by the manufacturer, its service agent
or similarly qualied persons in order to avoid
a hazard.
It is strongly recommended to be installed
with Earth Leakage Circuit Breaker (ELCB)
or Residual Current Device (RCD) to prevent
electric shock or re.
To prevent overheating, re or electric shock:
• Insert the power plug properly.
• Dust on the power plug should be periodically
wiped with a dry cloth.
Stop using the product if any abnormality/failure
occurs and disconnect the power plug or turn off
the power switch and breaker.
(Risk of smoke/re/electric shock)
Examples of abnormality/failure
• The ELCB trips frequently.
• Burning smell is observed.
• Abnormal noise or vibration of the unit is
observed.
• Water leaks from the indoor unit.
• Power cord or plug becomes abnormally hot.
• Fan speed cannot be controlled.
• The unit stops running immediately even if it is
switched on for operation.
• The fan does not stop even if the operation is
stopped.
Contact your local dealer immediately for
maintenance/repair.
Replacement or installation of power plugs shall
be performed by authorized/qualied personnel
only. The wires in this mains lead are coloured
in accordance with the following code:
Wiring colour may vary depending on a country
wiring code’s standard.
This equipment must be earthed to prevent
electric shock or re.
Prevent electric shock by switching off the
power supply and unplug when:
- Before cleaning or servicing.
- Extended non-use.
- Abnormally strong lightning activity.
Black
earth
Terminals
Red
colours (IEC Standard)
Wires
live
brown
blue
green-yellow
neutral
Green/Yellow
F568478_EN_CS5.indd 16 2012-5-28 16:34:32

17
ENGLISH
5
ENGLISH
REMOTE CONTROL
ANTI-BACTERIALFILTER
CHECK ERRORRESETRESET
SELECT
SET/CANCEL
AIRCONDITIONER
QUIET
POWERFUL
/
AB
Press the remote control’s button
1TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
3TO SELECT OPERATION MODE
AUTO mode - For your convenience
• During operation mode selection the power indicator blinks.
• Unit selects the operation mode according to the indoor
intake temperature and remote control temperature.
HEAT mode - To enjoy warm air
• In heat mode, it may take a while for the unit to warm up.
The POWER indicator blinks during preheating.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
Maximum distances: 8m
5TO ADJUST AIRFLOW DIRECTION
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL mode, if AUTO is set, the louver swing up/down
automatically.
• In HEAT mode, if AUTO is set, the horizontal louver x at
predetermined position.
6TO ACHIEVE TEMPERATURE QUICKLY
• This setting enables the desired set temperature to be
reached quickly.
7TO ENJOY QUIET ENVIRONMENT
• This setting provides a quiet environment by reducing the
airow noise.
• POWERFUL and QUIET operations can not be activated
at the same time.
8PRESS TO RESTORE THE REMOTE CONTROL’S
DEFAULT SETTING
910 NOT USED IN NORMAL OPERATIONS
INDICATOR
(GREEN)
(ORANGE)
(GREEN)
(RED)
Remote Control display
1
5
3
6
8
4
7
9
2
Transmitter
10
F568478_EN_CS5.indd 17 2012-5-28 16:34:35

186
TO SET THE TIMER
(12-HOUR TIMER SETTING)
• When you want the air conditioner to turn ON or OFF
automatically.
DELAY OFF-TIMER
For example, to stop the air conditioner 5 hours later.
1 To select the Delay OFF-TIMER, press the
button once.
2 Press the button to select the delay hour.
• The OFF-TIMER can only be set while the air-
conditioner is in operation.
DELAY ON-TIMER
For example, to start the air conditioner 2 hours later.
1 To select the Delay ON-TIMER, press the
button once.
2 Press the button to select the delay hour.
• The ON-TIMER can only be set while the air-
conditioner is not in operation.
DELAY OFF AND ON TIMER
For example, to stop the air conditioner 3 hours later
and start 4 hours later.
1 To select the Delay OFF and ON Timer, press the
button twice repeatedly.
2 Press the button to select the delay hour for
OFF Timer.
3 Press the button to select the delay hour for
ON Timer.
• This mode of timer can only be set while the air-
conditioner is in operation.
DELAY ON AND OFF TIMER
For example, to start the air conditioner 7 hours later
and stop 10 hours later.
1 To select the Delay ON and OFF Timer, press the
button twice repeatedly.
2 Press the button to select the delay hour for
ON Timer.
3 Press the button to select the delay hour for
OFF Timer.
• This mode of timer can only be set while the air-
conditioner is not in operation.
TO CONFIRM THE TIMER SETTING
Press the button once to activate the timer
operation which will start when the set time is reached.
TO CANCEL THE TIMER SETTING
Press the button again to cancel the timer
operation.
• The timer indicator of the indoor unit will light up
during the timer operation.
• When ON Timer is set, the unit may start earlier
before the actual set time in order to achieve the
desired temperature on time.
• If you press operation button during the timer
setting operation, timer setting will be cancelled.
• If timer is cancelled manually or due to power failure,
you can restore the timer again by repeating steps
above (once power is resumed).
F568478_EN_CS5.indd 18 2012-5-28 16:34:39

19
ENGLISH
7
ENGLISH
2
5
7
1
4
6
8
9
3
CAUTION
•Switch off the power supply and unplug before cleaning.
•Do not touch the aluminium n, sharp parts may cause injury.
1INDOOR UNIT
• Wipe the unit gently with a soft, dry cloth.
2FRONT PANEL
Remove Front Panel
• Raise and pull to remove the front panel.
• Wash gently and dry.
Close Front Panel
• Press down both ends of the front panel to close it securely.
3RECEIVER
4ALUMINIUM FIN
5HORIZONTAL AIRFLOW DIRECTION LOUVER
• Manually adjustable.
WARNING
Be careful not to insert your ngers into the
unit to avoid injuring by cross-ow fan.
6VERTICAL AIRFLOW DIRECTION LOUVER
• Do not adjust by hand.
7AUTO OFF/ON BUTTON
• Use when remote control is misplaced or malfunction.
Action Mode
Press once. Auto
Press and hold until 1 beep is heard,
then release. Cooling
Press and hold until 1 beep is heard,
then release.
Press again until 2 beeps, then release.
Heating
Press the button to turn off.
8AIR FILTERS
• Clean the lters regularly.
• Wash/rinse the lters gently with water to avoid damage
to the lter surface.
• Dry the lters thoroughly under the shade, away from
re or direct sunlight.
• Replace any damage lter.
9ANTI-BACTERIAL FILTER
•
It is recommended to clean this lter every 6 months.(Vacuum)
• Replace the lter every 10 years or replace any
damaged lter.
INDOOR UNIT
CLEANING INSTRUCTIONS HINT
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
• To ensure optimal performance of the unit, cleaning
maintenance have to be carried out at regular intervals.
NOTE
• If chemical cloth is used to wipe the unit, instruction for
the cloth should be followed.
F568478_EN_CS5.indd 19 2012-5-28 16:34:42

208
TROUBLESHOOTING
The following symptoms do not indicate malfunction.
SYMPTOM CAUSE
Mist emerges from indoor unit. ► • Condensationeffectduetocoolingprocess.
Waterowingsoundduringoperation. ► • Refrigerantowinsidetheunit.
Theroomhasapeculiarodour. ► • Thismayduetodampsmellemittedbythewall,carpet,
furnitureorclothing.
Indoorfanstopsoccasionallyduringautomaticfanspeedsetting. ► • Thishelpstoremovethesurroundingodours.
Operationisdelayedafewminutesafterrestart. ► • Thedelayisaprotectiontotheunit’scompressor.
Outdoorunitemitswater/steam. ► • Condensationorevaporationoccursonpipes.
Theunitoperatesautomaticallywhenpowerisresumed
afterapowerfailure.
► • ItistheAutoRestartfunctionoftheunit.Operationwill
berestartedautomaticallyunderthepreviousoperation
modeandairowdirectionwhenpowerisresumedas
theoperationisnotstoppedbyremotecontrol.
Indoorfanstopsoccasionallyduringheatingoperation. ► • Toavoidunintendedcoolingeffect.
POWERindicatorblinksduringHEATmode. ► • Theunitisindefrostmode.
POWERindicatorblinks3secondsONand0.5seconds
OFFduringoperation.
► • TheunitisinDemandResponseMode.
Crackingsoundduringoperation. ► • Changesoftemperaturecausetheexpansion/
contractionoftheunit.
Check the following before calling for servicing.
SYMPTOM CHECK
Heating/Coolingoperationisnotworkingefciently. ► • Setthetemperaturecorrectly.
• Closealldoorsandwindows.
• Cleanorreplacethelters.
• Clearanyobstructionattheairinletandairoutletvents.
Noisyduringoperation. ► • Checkiftheunithasbeeninstalledatanincline.
• Closethefrontpanelproperly.
Remotecontroldoesnotwork.
(Displayisdimortransmissionsignalisweak.)
► • Insertthebatteriescorrectly.
• Replaceweakbatteries.
Theunitdoesnotwork. ► • Checkifthecircuitbreakeristripped.
• Checkiftimershavebeenset.
Theunitdoesnotreceivethesignalfromtheremote
control.
►• Makesurethereceivernotobstructed.
• Certainuorescentlightsmayinterferewithsignal
transmitter.Pleaseconsultauthorizeddealer.
The unit stops and the timer indicator blinks.
Useremotecontroltoretrieveerrorcode.
CHECK ERROR RESET RESET
SELECT
SET/CANCEL
QUIET
POWERFUL
/
A B
1Pressfor5
seconds. 3Pressfor5secondsto
quitchecking.
2Pressuntilyouhear4
beepsounds,thenjot
downtheerrorcode.
4Turntheunitoffandrevealtheerrorcodetoauthorizeddealer.
F568478_EN_CS5.indd 20 2012-5-29 8:49:43

9
INFORMATION
Information for Users on Collection and Disposal of Old Equipment and used Batteries
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Pb
FOR SEASONAL INSPECTION AFTER EXTENDED
NON-USE
• Checkingofremotecontrolbatteries.
• Noobstructionatairinletandairoutletvents.
• UseAutoOFF/ONbuttontoselectCooling/Heating
operation.After15minutesofoperation,itisnormal
to have the following temperature difference between
air inlet and air outlet vents:
 Cooling:≥8°C Heating:≥14°C
NON SERVICEABLE CRITERIAS
TURNOFFPOWERSUPPLYthenpleaseconsult
authorized dealer under the following conditions:
• Abnormalnoiseduringoperation.
• Water/foreignparticleshaveenteredtheremotecontrol.
• WaterleaksfromIndoorunit.
• Circuitbreakerswitchesofffrequently.
• Powercordbecomesunnaturallywarm.
• Switchesorbuttonsarenotfunctioningproperly.
• Thetimerindicatorblinksandtheunitcannotbe
operated.
FOR EXTENDED NON-USE
• ActivateHeatmodefor2~3hoursasanalternativeto
remove moisture left in the internal parts thoroughly
to prevent mould growth.
• Turnoffthepowersupply.
• Removetheremotecontrolbatteries.
F568478_cover.indd 9 2012-5-28 16:45:03

10
Model
CS-RE9NKR
CU-RE9NKR
CS-RE12NKR
CU-RE12NKR
COOL HEAT COOL HEAT
Single, 230V-240V, 50Hz Single, 230V-240V, 50Hz
Power/Current [kW] 0.650-0.650 0.810-0.810 0.940-0.940 1.100-1.100
[A] 3.10-3.05 3.80-3.75 4.20-4.10 5.00-4.90
Refrigerant [kg]R410A
0.740
R410A
0.970
Cooling Capacity [kW] 2.50-2.50 3.50-3.50
Heating Capacity [kW] 3.30-3.30 4.25-4.25
Noise Level
JIS C 9612 [<70 dB(A)]
[dB(A)]
42 42 42 42
Conditions 1m Distance
Max. cooling 47 48 48 50
Sound power level [dB(A)]
58 58 58 58
63 64 64 66
Air Circulation [m3/min.] 12.4 12.1 12.7 12.4
Product Weight [kg]8.0 8.0
25 27
Dimensions (H × W × D) [mm] 290 × 848 × 213 290 × 848 × 213
540 × 780 × 289 540 × 780 × 289
1. Standard piping length: 5m(Indoor Unit piping length is not included).
2. Air lters are attached.
Indoor Unit
Outdoor Unit
PRODUCT SPECIFICATION
F568478_cover.indd 22 2012-6-4 10:42:02

11
Persian
k
لوصحم ینف تاصخشم



/




 :





F568478_cover.indd 23 2012-5-28 16:45:28

Printed in China
F568478
F1204-00
MODE
AUTO HEAT
DRY COOL
Select the desired mode.
1
OFF/ON
Start/stop the operation.
2
TEMP
Select the desired temperature.
3
QUICK GUIDE
Remote Control Preparation
1
Remove the battery cover
2
Insert AAA or R03 batteries (can be used ~ 1 year)
3
Close the cover
2
1
3
2 1
3
F568478_cover.indd 24 2012-5-28 16:45:31