Panasonic CW-XV715JA User manual

Thank you for
buying Panasonic
Air Conditioner
F568442_EN 1/20/09, 5:29 PM1

Press MODE button to select Sleep mode. SLEEP LED lights on. SET LED blinking awaiting for
confirmation. 7-SEGMENT LED DISPLAY show the last set duration time or the default time
(8 hours) if the duration has not been set.
Note: If the TIMER button is pressed after selecting SLEEP, there will be no change or effect.
Note: If no other operation is performed within 10 seconds, sleep mode will cancel out and
automatically return to Cool mode. SET LED stops blinking and COOL LED lights on. 7-SEGMENT
LED display will show the temperature display.
Press TEMP/TIMER or to select the desired hour. (Range is 4 to 12 hours).
Press SET/CANCEL button to complete setting. SET LED stops blinking and lights on. Sleep mode
is set.
Press the TIMER button to check the remaining hour of Sleep mode operation. The hour is
displayed for 5 seconds then will automatically switch back to temperature display. If the set
duration time is ‘7’, it will display ‘6’, one hour after Sleep mode starts to operate.
Note: The hour display will change to temperature display 5 seconds after the SET/CANCEL
button was pressed. Or press or buttons, the hour display will change to temperature
immediately.
CHECK THE REMAINING HOUR DURING SLEEP OPERATION
CANCEL SLEEP OPERATION
Press SET/CANCEL button. Sleep mode will cancel out and automatically return to Cool mode.
SET LED and SLEEP LED lights off. COOL LED lights on. Or press MODE.
NOTE: After the unit stops from Sleep Mode operation or after the unit resumes operating after a
brownout, it will automatically reset to Cool Mode at the time the unit was turned on.
F568442_EN 1/20/09, 5:29 PM1

d
a
b
c
d
( ) ( )
F568442_EN 1/20/09, 5:29 PM1

F568442_EN 1/20/09, 5:29 PM1