Panasonic JT-R210CR-50 User manual

Contactless IC Card Reader
Model No. JT-R210CR-50
Introduction
This document is instruction of precautions and maintenance for
Contactless IC Card Reader.
Please read this document carefully to operate the device properly.
Please refer the manual, “Operating Instructions of Payment
Terminal(Model No. ZEC-14LG)”before you operate the device.
• FeliCa and the FeliCa logo are registered trademarks of Sony Corporation.
■Precautions
Safety
1. Avoid Radio Frequency Interference
Do not place the reader near a television or radio receiver.
2. Avoid Stacking
Do not place heavy objects on the reader.
3. Keep Small Objects Away
Do not insert paper clips or other small objects into reader.
There is the risk of heat, fire or explosion.
4. Keep Dry
There is the risk of heat, fire or explosion.
5. Do Not Disassemble the Reader
Do not attempt to disassemble the reader. There is the risk of explosion.
Maintenance
Clean the device with a dry soft cloth
Stubborn stains may be removed with a cloth slightly dampened with a
solution of mild soap and finish with a dry cloth.
Notice:
Never use solvents such as alcohol, benzene or thinner for cleaning. Also do
not apply insecticide, glass cleaner or hair spray for cleaning. (this may cause
color fading or feel changing.)

Specifications
Items Description Specifications
Type Monochrome LCDDisplay
Resolution 64×128 pixels
Dimensions Approx.W90 mm×H47 mm×D150 mm
Weight Approx.255 g(not include cables)
Power
requirements
24 V DC Max.150 mA
Operating
Temperature
0 ℃to 40 ℃Environment
Operating
Humidity
30 % to 80 %RH (no condensation)
Radio Freq. 13.56 MHzIC Card
Communication Card Type FeliCa ©
Communication Wired Serial communication
This manual is copyrighted by Matsushita Electric Industrial Co.,Ltd. with all right
reserved.
Product may be subject to export control regulations.
Specifications and manuals are subject to change without notice.
Federal Communications Commission Requirements
Note:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Panasonic system solutions company
Matsushita Electric Industrial Co., Ltd.
Phone:[phone] Fax:[phone]
© 2008 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in Japan
3TR005618BAA
P0608-1068