Panasonic 2SB0792A User manual

Transistors
Publication date : October 2008 SJC00417AED 1
This product complies with the RoHS Directive (EU 2002/95/EC).
2SB0792A
Silicon PNP epitaxial planar type
For high breakdown voltage low-noise amplification
Features
High collector-emitter voltage (Base open) VCEO
Low noise voltage NV
Mini type package, allowing downsizing of the equipment and automatic
insertion through the tape packing.
Absolute Maximum Ratings Ta= 25°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO –185 V
Collector-emitter voltage (Base open) VCEO –185 V
Emitter-base voltage (Collector open) VEBO –5 V
Collector current IC–50 mA
Peak collector current ICP –100 mA
Collector power dissipation PC200 mW
Junction temperature Tj150 °C
Storage temperature Tstg –55 to +150 °C
Electrical Characteristics Ta= 25°C±3°C
Parameter Symbol Conditions Min Typ Max Unit
Collector-emitter voltage (Base open) VCEO IC= –100 mA, IB= 0 –185 V
Emitter-base voltage (Collector open) VEBO IE= –10 mA, IC= 0 –5 V
Collector-base cutoff current (Emitter open) ICBO VCB = –100 V, IE= 0 –1 mA
Forward current transfer ratio *hFE VCE = –5 V, IC= –10 mA 130 330 
Collector-emitter saturation voltage VCE(sat) IC= –30 mA, IB= –3 mA –1 V
Transition frequency fTVCB = –10 V, IE= 10 mA, f = 200 MHz 200 MHz
Collector output capacitance
(Common base, input open circuited)
Cob VCB = –10 V, IE= 0, f = 1 MHz 4 pF
Noise voltage NV VCB = –10 V, IC= –1 mA, GV= 80 dB,
Rg= 100 kΩ, Function = FLAT 150 mV
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *: Rank classification
Rank R S
hFE 130 to 220 185 to 330
Merking symbol 2FR 2FS
Package
Code
Mini3-G1
Pin Name
1. Base
2. Emitter
3. Collector
Marking Symbol: 2F

2SB0792A
2SJC00417AED
This product complies with the RoHS Directive (EU 2002/95/EC).
VCE(sat) IChFE IC fTIE
2SB0792A_PC-Ta
0 16040 12080
0
240
200
160
120
80
40
Collector power dissipation PC(mW)
Ambient temperature Ta(°C)
2SB0792A_IC-VCE
0−12−10−8−2−6−4
0
−100
−80
−60
−40
−20
Ta=25°C
−2 mA
−1 mA
−3 mA
−4 mA
−5 mA
−6 mA
−7 mA
−8 mA
−9 mA
IB=−10 mA
Collector current IC(mA)
Collector-emitter voltage VCE (V)
2SB0792A_VCE(sat)-IC
−0.1 −1−10 −100
−0.01
−0.1
−1
−10
−100 IC/ IB=10
Ta=75°C
25°C
−25°C
Collector-emitter saturation voltage VCE(sat) (V)
Collector current IC(mA)
2SB0792A_hFE-IC
−0.1 −1−10 −100
0
600
500
400
300
200
100
VCE =−5 V
Ta=75°C
25°C
−25°C
Forward current transfer ratio率hFE
Collector current IC(mA)
2SB0792A_fT-IE
0.1 1 10 100
0
250
200
150
100
50
VCB =−10 V
Ta=25°C
Transition frequency fT(MHz)
Emitter current IE(mA)
2SB0792A_Cob-VCB
−1−10 −100
0
10
8
6
4
2
IE=0
f =1 MHz
Ta=25°C
Collector-base voltage VCB (V)
Collector output capacitance (Common base, input open circuited) Cob (pF)
2SB0792_IC-VBE
0−2.0−1.6−0.4 −1.2−0.8
0
−120
−100
−80
−60
−40
−20
VCE =−5 V
Ta=75°C−25°C
25°C
Collector current IC(mA)
Base-emitter voltage VBE (V)
Cob VCB
PCTaICVCE ICVBE

2SB0792A
SJC00417AED 3
This product complies with the RoHS Directive (EU 2002/95/EC).
Mini3-G1 Unit: mm
(0.95)
(0.95)
1.9 ±0.1
0.40
1.50
2.8
2.90
3
2
1
5°
0.4 ±0.2
0.16
10°
1.1
1.1
0 to 0.1 (0.65)
+0.10
−0.05
+0.25 −0.05
+0.2 −0.3
+0.20
−0.05
+0.2 −0.1
+0.3 −0.1
+0.10
−0.05

Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20080805