Panasonic KX-TGA470 User manual

PanasoniC
Installation
Manual
Additional
Digital
Cordless
Handset
Model No. KX-TGA470
DECT
6.0
Thank
you
for
purchasing
a Panasonic
product.
This unit is an additional handsetcompatible with the following
series
of
Panasonic Digital Cordless Phone:
KX-TG4731/KX-TG4741/KX-TG4751/KX-TG4761/
KX-TG4771/KX-TG7731/KX-TG7741
(The corresponding models are subject to change without
notice.)
You
must registerthis handsetwith yourbase unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. Please read
the base unit's operating instructions for further details.
CHarge
•
the
batterieiJ
'toral:tout··
7
···
··
Hl1flf$
Qttfore
iQi
u
.
se~
Please read this installation
manual before using the unit and
save it for future reference.
For assistance, visit our Web site:
http://www.panasonic.com/help
for customers
in
the U.S.A. or
Puerto Rico.
*TGA470*
Printed
in
China PNQX5093ZA PT1111
MGO
(D)

Accessory information
Supplied accessories
Charger*1
AC adaptor/PNLV226Z
Rechargeable batteries/HHR-4DPA
Handset cover*2• *3
Belt clip*4
*1 PNLC1029ZB: Black, PNLC1029ZS: Silver
*2 PNYNTGA470BR: Black
*3 The handset cover comes attached to the handset.
*4 PNKE1132Z1: Black
Note:
1
1
2
1
1
• Please read the base unit's operating instructions for additional/
replacement accessories.
-Optional headsets: KX-TCA60, KX-TCA93, KX-TCA400,
KX-TCA430
2 For assistance, please visit http://www.panasonic.com/help

Setting up
Connections/Wall mounting
Note:
25.4 mm
(1
inch)
Screws
(Not supplied)
m•
To
power outlet
~
Hooks
• Use only the supplied Panasonic AC adaptor PNLV226.
• The AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
• Make sure that the wall and the fixing method are strong enough to
support the weight
of
the unit.
Battery installation/Battery charging
Important:
• Use the supplied rechargeable batteries. For replacement, we
recommend using the Panasonic rechargeable batteries noted on
page 2.
• Wipe the battery ends ((f),
8)
with a dry cloth.
• Avoid touching the battery ends ((f),
8)
or
the unit contacts.
• Confirm correct polarities ((f),
8).
• USE ONLY Ni-MH batteries
AAA
(R03) size.
• Do
NOT
use Alkaline/Manganese/Ni-Cd batteries.
For assistance, please visit http://www.panasonic.com/help 3

Charge for about 7 hours.
• When the batteries are fully charged,
"Fully charged" is displayed.
Note:
Rechargeable
Ni-MH ONLY Confirm
"Charging"
is displayed.
•If the batteries are fully charged, but the operating time seems to be
shorter, clean the battery ends (
(±), 8) and the charge contacts with a
dry cloth and charge again.
Registering a handset to a base unit
1 Base unit:
Press and hold [LOCATOR] for about 5 seconds.
• Depending on the base unit, a registration tone sounds.
• If all registered handsets start ringing, press
[LOCATOR] again to
stop, then repeat this step.
2 Handset:
Place the handset on the base unit or charger, then wait until a long
beep sounds
andY is displayed.
Note:
• If an error tone sounds, or ifY is displayed, register the handset
according to the base unit's operating instructions.
4 For assistance, please visit http://www.panasonic.com/help

Display language
1 [MENU] [!][)[)[Q]
2 [!]:Select the desired setting.~ [SAVE]
3 [OFF]
Belt clip
• To attach
•To remove
For assistance, please visit http://www.panasonic.com/help 5