Panasonic VL-SVN511 Series User manual

1
2
D1
D2
3
4
D3
D4
5
6
R1
R2
7
8
R3
IN1
9
10
IN2
IN3
11IN4
12P1
13P2
Power
supply
Power
supply
DOORPHONE 1* DOORPHONE 2*
MAIN MONITOR
POWER SUPPLY UNIT
24 V DC
NP
NP
NP
NP
NP
NP
Electric lock
Electric lock
220-240 V AC Connection device
for option input
(A contact)
Terminal box
(4-conductor
wiring)
PBX*3
12 V AC/DC
12 V AC/DC
NP NP
RELAY BOX
A
B
C
D
E
F
G
R1
1
R2 R3
S2
1
S1 S4
2
S3
2
Key Features
•SmartphoneConnect:You can use your smartphone or tablet as a sub monitor to respond to visitors and unlock electric locks no matter where you are in the
home. You can also monitor doorphone images when you want to check the door entrance. Maximum of 4 supported smartphones/tablets can be connected.
* The main monitor must be on the same home Wi-Fi network as a smartphone/tablet (with the dedicated app installed).
* It is also necessary to run the dedicated app in order to receive visitor's calls on a smartphone/tablet.
* Compatible mobile devices: iPhone 5 and later and iPad (iOS 7.0 or later) / AndroidTM smartphones and tablets (Android 4.0 or later)
* Some mobile devices may not be compatible.
* For the latest information about the app and compatible devices, visit the following website. http://panasonic.net/pcc/support/intercom/smartphone/
•E-mailNotication: The main monitor can send e-mail with a time stamp and image of visitors to e-mail addresses registered in advance, enabling you to
check who has visited when you are outside the house (even when you are overseas).
When commercially available sensors (such as a re alarm, calling button, etc.) are connected to the main monitor, you can receive notications.
* To use this function, a main monitor with e-mail sender information registered must be connected to the internet.
* E-mail may not be able to be sent depending on the condition of the network.
•Wi-FiConnection: In addition to smartphones/tablets, the main monitor can also wirelessly connect to the Wi-Fi router for easy connections without a cable.
You can congure Wi-Fi settings using a simplied method (called WPS).
•ElectricLockReleaseSupport:The gate or door lock can be easily and quickly unlocked with either the main monitor or a mobile device such as a
smartphone/tablet, even from the second oor of the house.
•PictureRecordingFunction:The Main Monitor records the images of up to 400 (50 visitors, 8 shots per visitor).
•VoiceChangeFunction:This function makes woman’s voice (higher keys) sounds like a man’s (lower keys).
•NightVision:Door Station is equipped with LED lights (illumination lamp). It enables the colour display of visitors at a distance of about 50 cm at night.
Wiring schematic diagram
Accessory Information Optional Accessories
Relative Product
VL-SVN511
Video Intercom System
CMOS 0.3 M pixels
VL-V555
(Surface mount)
Door Station (Doorphone)
Main Monitor
Station
(Main monitor)
VL-MVN511
CMOS 1.0 M pixels
VL-V554
(Surface mount)
VL-V554U
(Flash mount)
For the Door Station:
Screw (3.8 mm x 20 mm) x 2
Relay Box and Related Items:
Relay box × 1, Cable binder × 1, Screw (4 mm x 40 mm) x 2
For the Main Monitor Station:
Mounting bracket × 1, Cable binder × 1,
Screw (4 mm x16 mm) x 2, Power supply unit (VL-PS241) × 1,
AC cable x 1, Cable binder x 1, Screw (4 mm x 40 mm) x 2
Wire type and length
*1 Type: Single-pair cable with outer sheath (jacket)
Conductor: Copper solid
•
A certied power supply wiring has to be used with this equipment. The relevant national
installation and/or equipment regulations shall be considered. A certied power supply wiring
not lighter than ordinary polyvinyl chloride exible wiring according to IEC 60227 shall be used.
*2 When using an electric lock or a connection device for option input (A contact), select a
device that meets the following guidelines:
• Electric lock connection terminal (S1/S2, S3/S4):
– N/O dry closure contact
– 12 V AC/DC, less than 1 A
•
Connection device for option input (A contact) terminal (IN1/IN2/IN3/IN4):
– Input method: No-voltage contact
– Open-circuit voltage between terminals: DC 7 V or less
– Detection denite time: 0.1 second or more
– Short-circuit between terminals: 5 mA or less
– Resistance value: make: 500 Ω or less make, break: 15 KΩ or more
*3 Connectable PBX Model Numbers:
KX-TDA30/100/100D/200/600 series, KX-TDE100/200/600 series,
KX-NS300/500/700/1000 series
Please consult your dealer when connecting with a PBX.
Lobby Station
VL-V590
Up to 20 main
monitors can be
connected.
*When you use an additional doorphone, the maximum number of the electric locks that can be connected
to the doorphone depends on the type of doorphone. Consult your dealer for further information.
Wiring run Wire type*1
Diameter Length (Max.)
Main monitor – Doorphone
(including lobby station) A
φ0.65 mm 22 AWG 100 m
φ1.0 mm 18 AWG 130 m
φ0.5 mm CAT 5 50 m
Main monitor – Power supply unit Bφ0.65 mm 22 AWG 10 m
φ1.0 mm 18 AWG 20 m
Power supply unit – AC power source C
φ1.2 mm - φ2.0 mm (17 AWG - 12 AWG)
No requirement
Main monitor – Relay box Dφ0.65 mm 22 AWG 100 m
φ1.0 mm 18 AWG 130 m
Relay box –Electric lock*2 E
φ0.5 mm - φ 1.2 mm (24 AWG - 17 AWG)
According to specication of connected device.
Main monitor – Connection device for option input (A contact)
*2
F
φ0.5 mm - φ 1.2 mm (24 AWG - 17 AWG)
According to specication of connected device.
Main monitor – PBX
Gφ0.65 mm CAT 3 or 22 AWG
100 m
NP: Non-polarised
Door Station
(Doorphone)
VL-V522L
(Surface mount)

Specications
VL-MVN511 VL-V522L VL-PS241 VL-RLY1
Model number and name Main Monitor Station (Main monitor) Door Station (Doorphone) Power Supply Unit
* indoor use only Relay Box
Dimensions
(mm)
Power source
Power supply unit (VL-PS241)
24 V DC, 0.5 A
Power supplied by the main monitor Input: 220-240 V AC, 0.2 A ( 50 / 60 Hz )
Output: 24 V DC, 0.6 A Power supplied by the main monitor
Power consumption Standby: Approx. 1.8 W
During operation: Approx. 10 W ---
Dimensions (H x W x D)
(Excluding protruding sections)
186 x 161 x 23.5 mm 131 x 99 x 36.5 mm 104 x 100 x 54 mm 92 x 78 x 38 mm
Weight 485 g 200 g 215 g 130 g
Operating environment Ambient temperature: Approx. 0 °C to +40 °C,
Relative humidity (non-condensing): up to 90 %
Ambient temperature: Approx. -15 °C to +55 °C,
Relative humidity (non-condensing): up to 90 %
(tested up to -20 °C)
Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
Display
5-inch, wide colour / WQVGA (480 x 272 pixel) ---
Display Language
English, Arabic ---
Talking method Hands-free ---
Frequency range Wi-Fi: (IEEE 802.11 b/g/n 2.4 GHz) ---
Viewing angle -Horizontally: Approx. 87°
Vertically: Approx. 66° - -
Installation method Wall mount (mounting bracket supplied) Surface mount (mounting base supplied) Wall mount or attach to DIN rail Wall mount or attach to DIN rail
Minimum illuminance required
- 1 lx (within approx. 50 cm from the camera lens) - -
Lighting method - Warm white LED lights, Infrared LEDs - -
IP rating / IK rating -IPX3*1 - -
External material
Flame retardant ABS and PS resin Flame retardant ABS resin Flame retardant PC+ABS resin Flame retardant ABS resin
*1 Water resistance is only assured if the Door Station is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
Trademarks and registered trademarks
- Wi-Fi is a trademark or registered trademark of Wi-Fi Alliance.
- iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
- Android is a trademark of Google Inc.
- All other trademarks identified herein are the property of their respective owners.
Important
- Safety Precaution: carefully read the operating instructions and installation manual before using this product.
• The actual product may vary slightly from photograph.
• All pictures of the LCD display are simulated.
• Weights and dimensions are approximate.
• Design and Specifications are subject to change without notice.
• These products may be subject to export control regulations.
Installing the Doorphone
DISTRIBUTED BY :
MG-DHPL014EN 1510ITP/ZZZ-BX2
Model Composition
VL-SVN511 VL-MVN511 x 1, VL-V522L x 1
Wood screws Mounting base
Wire
(User supplied)
Screwdriver
83.5 mm
Wall
Screws
Mounting
bracket Wall
Wire (User supplied)
83.5 mm
Installing the Power Supply Unit Installing the Relay Box
Front view Front view
Top view
Bottom View
Top view
Bottom View
Side View Top View
DC Cable
AC IN connector
To the electric lock
Remove the screw
on the cable cover.
25 mm
7 mm
R1 R2 R3
1 2 R1 R2 R3
1 2
1 2
S1 S2 S3 S4
DC OUT
terminal
Cable binder
hole
Electric lock
terminal
Main monitor
terminal connector
DC cable
binder hole
button
131 mm
186 mm
99 mm
161 mm
Mounting
base
Mounting bracket
Main Monitor
24 mm
86.8 mm
83.5 mm
83.5 mm
Image range
Centre of
doorphone
1450 mm
650 mm
1810 mm
1160 mm
500 mm
66°
87°
500 mm
960 mm
From the main monitor
Installing the Main Monitor
•Installation Position
9 mm
Cable from the main monitor
7 mm
25 mm
Cable from the electric lock
AC cable
DC cable
Remove the screw
on the cable cover.
100 78
104 92
99
161
131
186
54 38
36.5
23.5
Up to 2