Panasonic VL-SWD273 User manual

Key Features
•Highly Expandable:
Up to 6 additional monitors can be connected to the main monitor using a combination of 7-inch wired monitors and 2.2-inch wireless monitors (However, the
maximum possible number of 7-inch wired monitors is 3). In addition, PBX connectivity is also supported.
•Wireless Monitor: Using the wireless monitor, check visitors and respond promptly from the living room, kitchen and elsewhere in the home even while you
are doing something else. Up to 6 wireless monitors connectable. Max wireless range is 100 m with no obstacles. You can add on repeaters to expand the range.
Up to 2 DECT repeaters connectable.
•7-inch Screen: The main monitor and extension monitor have a 7-inch wide screen that offers easy viewing of wide vertical and horizontal views.
•Voice Change Function: This function makes woman’s voice (higher keys) sounds like a man’s (lower keys).
•Electric Lock Release Support for Gate:
The gate or door lock can be easily and quickly released using monitors (wired or wireless) from anywhere in the house.
•Wide-Angle Camera: Wide-angle lens covers approximately 170 degrees horizontally and 115 degrees vertically.
•Picture Recording Function: The main monitor and extension monitor can record doorphone images from up to 50 doorphone calls or monitoring
sessions. (up to 8 still images per visitor/session)
•Night Vision with LED lights (illumination lamp):
Door station is equipped with LED lights (illumination lamp). It enables the colour display of visitors at a distance of about 50 cm at night.
Wiring Schematic Diagram
Optional Accessories
Wire type and length
VL-SVD273:
Wireless monitors sold separately
Wiring run Wire type*6
Diameter Length (Max.)
Doorphone –
Main monitor –
Extension monitor*7
φ0.65 mm 22 AWG 100 m
φ1.0 mm 18 AWG 130 m
φ0.5 mm CAT 5 50 m
Main monitor –
Power supply unit
φ0.65 mm 22 AWG 10 m
φ1.0 mm 18 AWG 20 m
Power supply unit –
AC power source
φ1.2 mm - φ2.0 mm
(17 AWG - 12 AWG) No requirement
Main monitor – Electric lock*8 φ0.5 mm - φ1.2 mm
(24 AWG - 17 AWG)
According to the specication
of connected device.
Doorphone – Electric lock*8 φ0.5 mm - φ1.2 mm
(24 AWG - 17 AWG)
According to the specication
of connected device.
Main monitor – Connection device
for option input (A contact)*8
φ0.5 mm - φ1.2 mm
(24 AWG - 17 AWG)
According to the specication
of connected device.
Main monitor – PBX φ0.65 mm CAT 3 or 22 AWG 100 m
*1 When you use an additional doorphone, the maximum number of the electric locks that can be connected to the
doorphone depends on the type of doorphone. Consult your dealer for further information.
For VL-V554 users:
- Make sure to only connect electric door locks to the S1/S2 terminals of the doorphones.
*2 You can also connect an optional lobby station or Video Intercom System for Apartment Complexes.
*3 Connection devices for option input (A contact) can be used when a VL-V900 and VL-V700 series Video Intercom System
for Apartment Complexes is used.
- Make sure to connect emergency terminals to the IN1/IN2 terminals.
- Make sure to connect doorbells to the IN3/IN4 terminals. A doorbell and doorphone 2 cannot be used together.
*4 VL-MWD273BX/VL-MWD273ML models only
*5 VL-SWD273AZ/VL-SVD273AZ/VL-MWD273AZ: Use only the supplied AC cable.
*6 Type: Single-pair cable with outer sheath (jacket)
Conductor: Copper solid
• A certied power supply wiring has to be used with this equipment. The relevant national installation and/or
equipment regulations shall be considered. A certied power supply wiring not lighter than ordinary polyvinyl
chloride exible wiring according to IEC 60227 shall be used.
*7 When an extension monitor is used, make sure that the total wiring length from the doorphone to the main
monitor and then to the extension monitor, is within about 100 m.
*8 When using an electric lock or a connection device for option input (A contact), select a device that meets the
following guidelines:
• Electric lock connection terminal (S1/S2, S3/S4):
- N/O dry closure contact
- 30 V AC (1 A)/24 V DC (1 A) or lower
• Connection device for option input (A contact) terminal (IN1/IN2/IN3/IN4):
- Input method: No-voltage contact
- Open-circuit voltage between terminals: DC 7 V or less
- Detection denite time: 0.1 seconds or more
- Short-circuit between terminals: 5 mA or less
- Resistance value: make: 500 Ω or less, break: 15 KΩ or more
Door Station
(Doorphone)
VL-V522L
(Surface mount)
D1 D2 S1 S2
D1
D2
D3
D4
Ml-1
Ml-2
MO-1
MO-2
MO-3
MO-4
MO-5
MO-6
IN1
IN2
IN3
IN4
P1
P2
1
2
3
4
19
20
21
22
5
6
7
8
9
10
11
12
13
14
15
16
17
18
S1
S2
S3
S4
Ml-1
Ml-2
5
6
Ml-1
Ml-2
5
6
Ml-1
Ml-2
5
6
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
D1 D2 S1 S2
24 V DC
NP
220-240 V AC
*5
*2
*4
MAIN MONITOR
EXTENSION
MONITOR 1
EXTENSION
MONITOR 2
EXTENSION
MONITOR 3
Connection device for
option input (A contact)*3
DOORPHONE 1 *1 DOORPHONE 2 *1
Terminal box
(4-conductor wiring)
PBX
NP: Non-polarised
Electric lock
Electric lock
Electric lock
Power
supply
Power supply
Power supply
Power
supply
Electric lock
VL-SWD273
VL-SVD273
Wireless Video Intercom System
Door Station (Doorphone)
CMOS 0.3 M pixels
VL-V555 (Surface mount)
CMOS 1.0 M pixels
VL-V554 (Surface mount)
VL-V554U (Flash mount)
DECT Repeater
VL-FKD2
Lobby Station
Up to 20 main
monitors can
be connected.
Wireless
Monitor Station
(Sub monitor)
VL-WD613
Extension Monitor
POWER SUPPLY UNIT
(Power source)
VL-MWD273: 24 V DC Power supply unit (supplied)
VL-MWD272: 220-240 V AC, 50/60 Hz
VL-MWD273
VL-MWD272

Approx. 110°
Centre of
doorphone
Approx. 1,450 Approx. 500
Approx. 750
Approx. 1,400
Approx. 2,150
Image range
Specications
Model Composition
Model number and name
VL-MWD273 VL-PS241 VL-V554
VL-V554U VL-WD613 VL-FKD2
Main Monitor Station (Main monitor)
Extension Monitor Power supply unit Door Station (Doorphone) Wireless Monitor Station
(Sub monitor) DECT Repeater
Dimensions
(mm)
Up to 3*1
(not including the main monitor)
Up to 2 Up to 6*1
Main body Charger
Up to 2
Power source Power supply unit (VL-PS241)
24 V DC, 0.5 A
Input: 220-240 V AC, 0.2 A, 50/60 Hz
Output: 24 V DC, 0.6 A
Power supplied by the main monitor
20 V DC, 0.23 A
Main body:
Rechargeable Ni-MH (AAA x 2)
Charger:
AC adaptor (PNLV226)
Input: 220-240 V AC, 0.1 A, 50/60 Hz
Output: 5.5 V DC, 0.5 A
AC adaptor (PQLV219)
Input: 220-240 V AC, 0.1 A, 50/60 Hz
Output: 6.5 V DC, 0.5 A
Power consumption Standby: Approx. 1.8 W
During operation: Approx. 11.6 W - - Standby: 0.5 W (when the sub
monitor is not placed in the charger)
During operation: 1.6 W
Standby: Approx. 1.5 W
During operation: Approx. 2.3 W
(when transmitting)
Dimensions (H x W x D)
(Excluding protruding sections) 158 x 243 x 29.5 mm 104 x 100 x 54 mm VL-V554: 169 x 118 x 30 mm
VL-V554U: 169 x 118 x 16.5 mm
(excluding sections embedded into the wall)
Main body: 173 x 52 x 30 mm
Charger: 43 x 81 x 76 mm 82 x 111 x 39 mm
Weight 710 g 215 g VL-V554: 405 g
VL-V554U: 345 g
Main body: 160 g (including the batteries)
Charger: 70 g (excluding the AC adaptor)
88 g (excluding the AC adaptor)
Operating environment
Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
Ambient temperature: Approx. 0 °C to +50 °C
Relative humidity (non-condensing): up to 90 %
Ambient temperature: Approx. -15 °C to +50 °C
Relative humidity (non-condensing): up to 90 %
(tested up to -20 °C)
Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 % Ambient temperature: Approx. 0 °C to +40 °C Relative humidity (non-condensing): up to 90 %
Display 7-inch wide colour / WVGA (800x480 pixels) - - 2.2-inch colour / QVGA (320x240 pixels) -
Display language English, Arabic - - English, Arabic -
Talking method Hands-free - - Hands-free -
Frequency range 1.88 GHz to 1.90 GHz - - 1.88 GHz to 1.90 GHz 1.88 GHz to 1.90 GHz
Viewing angle - - Horizontally: Approx. 170˚
Vertically: Approx. 115˚ - -
Image sensor / camera (pixel) - - CMOS sensor (Approx. 1.0 M pixels) - -
Installation method Wall mount
(mounting bracket supplied) Wall mount or attach to DIN rail
VL-V554: surface mount
(mounting base supplied)
VL-V554U: Flush mount
(Flush mounting box supplied)
- -
Minimum illuminance required - -
1 lx
(within approx. 50 cm from the camera lens)
- -
Lighting method - - Warm white coloured LED lights,
Infrared LEDs - -
Transmitting range ---Approx. 100 m (line-of-sight distance
from the main monitor) Approx. 100 m (line-of-sight distance from the main monitor)
IP rating / IK rating - - IP54*2/ Compliant with IK07 - -
External material Flame retardant PC+ABS resin,
Flame retardant ABS resin Flame retardant PC+ABS resin Aluminium and ame retardant
PC+PS resin ABS resin PS resin
243
158
29.5
52
173
30 111
82
39
VL-SWD273 VL-MWD273 x 1, VL-V554 x 1, VL-WD613 x 1, VL-PS241 x 1
VL-SVD273 VL-MWD273 x 1, VL-V554 x 1, VL-PS241 x 1 (VL-WD613 sold separately)
Installing the Doorphone
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
• The actual product may vary slightly from photograph.
• Weights and dimensions are approximate.
• Design and Specifications are subject to change without notice.
• These products may be subject to export control regulations.
*1 When sub monitors and extension monitors are used together, a total of up to 6 sub monitors and extension monitors can be registered.
*2 Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
Side View Top View
•Installation Position
DISTRIBUTED BY :
MG-DHPL023EN 1705TD/ZZZ-AU1
81
43
76
118
169
30
Installing the Main Monitor/Extension Monitor
Vertical, at wall
Screws
Hole in wall
83.5 mm
60 mm
7 mm
50 mm
Mounting bracket
158 mm
243 mm
Mounting
bracket
Main
Monitor
58 mm
83.5 mm
Installing the Power Supply Unit
AC cable
DC cable
Remove the screw
on the cable cover.
Top View
AC IN connector
Front View
DC OUT
terminal
DC cable
binder hole
Bottom View 25 mm
7 mm
DC Cable
100
104
54
Mounting base
(accessory)
Wire (locally procured)
Wall
83.5 mm
Screw × 2
Install the mounting base on a vertical at wall.
•VL-V554 (Surface mount)
Approx. 170°
Approx. 500