Panasonic VL-SWD701KL User manual

Thank you for purchasing a Panasonic product.
 This guide explains some basic features and operations, but not all of them. For further
details, see the Japanese operating instructions.
 This product is designed for use in Japan.
Panasonic cannot provide service for this product if used outside Japan.

Any details given in this guide are subject to change without notice.
VL-V571L VL-V554L VL-MWD701KL VL-WD614
Quick Reference Guide
Model No.
Model No.
VL-SWD701KL/VL-SWD701KS
VL-SVD701KL/VL-SVD701KS
Wireless Video Intercom System
Video Intercom System
Table of Contents
Main Monitor Station/Door Station (Doorphone)
Parts Descriptions .......................................................................................2
Basic Operations .........................................................................................3
Sub Monitor Station
Parts Descriptions .......................................................................................4
Basic Operations .........................................................................................4

2
3
Parts Descriptions
1Lens cover
2Camera lens
3Call button & indicator
4Microphone
5LED lights
6Speaker
Main Monitor Station
■ VL-V554L
■ VL-V571L
1Display (Touch Panel)
To use the touch panel
Touch the desired item as shown below.
● A touch sound is heard and the touched
item is highlighted.
2Notification indicator
● Flashes when there is a
notication.
3Living mode (Home, Night,
Out) indicator
4SD card indicator
5Speaker
6Talk indicator
7Talk button
8OFF button
9Microphone
10
Guidance off button
● Hides the button guidance that
overlaps the image.
1 3 42
5
76 8
10
9
1
4
5
6
2
3
1
4
5
6
2
3
Main Monitor Station/Door Station (Doorphone)
Door Station (Doorphone)

2
3
Basic Operations
■ To answer a call from a doorphone
When the ringtone is heard and the display turns on, press (7).
■ To monitor outside images
Touch the display (touch panel) ( 1). â Touch
［モニター 様子を見る］
.
(To talk to the visitor, press .)
● When an optional camera or more than one optional doorphone is connected
After touching
［モニター 様子を見る］
, touch the desired doorphone number, then touch
the doorphone image.
■ To monitor camera images
Touch the display (touch panel). â Touch
［モニター 様子を見る］
.
â
Touch the camera image.
● When more than one camera is connected
After touching
［モニター 様子を見る］
, touch the desired camera image.
■ To record a displayed image manually
Touch
［録画］
while monitoring an outside image.
■ To play back recorded images when the notification indicator flashes and
is displayed
Touch the display (touch panel). â Touch
［録画の一覧］
.
â
Touch
［再生］
.
â The recorded images are automatically played back.
■ To call the sub monitor station
Touch the display (touch panel). â Touch
［子機と話す］
, and speak to the other party.
â After the other party answers, start talking.
● When more than one optional sub monitor station is registered
After touching
［子機と話す］
, touch the image of where the desired sub monitor station is
located, and speak to the other party.
●The number after the button shows the location of the button described in the previous page.

4
5
Parts Descriptions
1Earpiece
2Display
3Multifunction buttons
Navigator button
Set button
6 displays functions that can be
operated by , , .
4Monitor button & indicator
5Talk button & indicator (Telephone)
6
Tone button (To switch to DTMF tone)
7Charge lamp
8Antenna (built-in)
9Speaker
10
Battery cover
11
Intercom/Hold button
12
OFF button
13
Talk button & indicator (Doorphone)
14
Microphone
15
Flip
Sub Monitor Station
Basic Operations
●The number after the button shows the location of the button described above.
Doorphone function
■ To answer a door call
When the ringtone is heard and the display
turns on, press (
13
).
■ To monitor outside images
Press ( 4).
(To talk to the visitor, press .)
●
When an optional camera or more than
one optional doorphone is connected
After press , select the desired doorphone
using
(
3
) and press (
3
).
Sub Monitor Station
ヒ ヒパ ヒピ ቈ᯺◜バ ヒパ パパ
⿉
ɷȬɑ⒙ᰳ˛
14
1
2
4
5
11
12
10
9
8
7
3
6
15
13
6

4
5
Doorphone function
■ To monitor camera images
After press , select the desired camera
using and press .
■ To record a displayed image manually
Press (
メニュー
) while monitoring an
outside image. â Select
［録画］
using ,
and press .
■ To play back recorded images when
新着の未確認画像あり
is displayed
Press (
録画一覧
) ( 3). â Press to
select the date and then press .
â Press .
■ To call the main monitor station
Press (
11
).
※
â Speak to the other party.
â After the other party answers, start talking.
● When more than one optional sub
monitor station is registered
After pressing , select
［親機］
using
and press .
■ To call another sub monitor station
Press .※â Select the desired sub
monitor station using , and press
.
â Speak to the other party. â After the
other party answers, start talking.
※
When the sub monitor station is registered
to both the main monitor station and base
unit (Telephone/Fax)
After pressing
, select
［ドアホン室内呼］
using , and press .
Telephone function
■ To make a call
Lift the sub monitor station from the charger
and press ( 5). â Open the flip (
15
)
and dial.......To end the call, press (
12
).
■ To receive a call
When the phone rings... â Press .
â Talk.......To end the call, press .
■ To switch to the speakerphone
(Hands-free talk)
During a call, press for approx. 2
seconds.
â Talk to the microphone.
● To switch to the earpiece
Press for approx. 2 seconds again.
■ To place the current call on hold
Press during a call.
■ To retrieve the held call
Press .
■ To transfer the held call to the base unit
Press during a call. â After pressing
(
内線呼出
) ( 3) , select
［親機］
using ,
and press . â After the other party
answers, press .
■ To transfer the held call to another
sub monitor station
Press during a call. â After pressing
(
内線呼出
), select the desired sub
monitor station using , and press .
â After the other party answers, press .

© Panasonic System Networks Co., Ltd. 2014 PNQP1105ZA C0414MT0