Panasonic H-FS14140PP User manual

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_cvr.xml[11/12/2018 11:22:35 AM]
Order No.DSC1305023CE
B26
Interchangeable Lens for Digital Camera
Model No. H-FS14140PP
H-FS14140E
H-FS14140GK
Colour
(S)...............Silver Type
(K)...............Black Type

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_cvr.xml[11/12/2018 11:22:35 AM]
© Panasonic Corporation 2013 Unauthorized copying and distribution is a violation of law.

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_01.xml[11/12/2018 11:23:05 AM]
1 Service Navigation
1.1 Introduction
This service manual contains technical information, which allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.

1.2 Important Notice
1.2.1 About LENS MAIN UNIT (Ref. 209)
1. 
critical lens adjustments.

2. 
UNIT (Ref. 202), to maintain Serial number of owner's original lens.

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_01.xml[11/12/2018 11:23:05 AM]
3. No adjustment is required when replacing the part mentioned on Fig.1-1. But, when tighten the concerned screws,apply proper
torque mentioned on "4. Disassembly and Assembly Instruction" section.

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_02.xml[11/12/2018 11:24:49 AM]
2 Operating Guide
2.1 Before Use
2.2 Cautions For Use

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_02.xml[11/12/2018 11:24:49 AM]
2.3 Components
2.3.1 Accessories

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_02.xml[11/12/2018 11:24:49 AM]
2.3.2 Attaching/Detaching the Lens

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_02.xml[11/12/2018 11:24:49 AM]

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_03.xml[11/12/2018 11:34:04 AM]
3 Service Fixture and Tools
3.1 Service Fixture and Tools
The following Service Fixture and Tools are used for Checking & Servicing for this unit.
3.2 Clean Box

10,000 (Federal Standard 209D).
[NOTE]

when cleaning the inside of a lens.

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
4 Disassembly and Assembly Procedure
4.1 Outline
It is recommended dealing with clean box, to keep maintaining the dustproof environment.
(Refer to “3.2. Clean Box” section of this service manual for details.)
And, please refer to "5.1.2. Dust / Dirt on the Lens Glasses" when cleaning the inside of the lens
Important:
1. 

As for procedure, refer to the “5 Maintenance” for details.
2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front &
rear), other than necessary cases.
3. 
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
Proceed disassemble/assemble, by referring the following table and Fig. W1.
NOTE:
1. 
on the following table.
2. Use VFK1390 (small driver) when screwing Ref. B212.
Interchangeable Lens (H-FS14140)

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
4.2 Disassembly procedure
Important:


4.2.1 Removal of the Decoration Ring
1. Decoration ring is sticked on the 1st lens frame unit.
2. Put the sheet so that the lens glass is fully covered.
3. 
gently.

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
4.2.2 Removal of the Filter ring
1. Remove the 3 screws (A).
4.2.3 Removal of the Shading frame
1. Remove the 2 screws (B).

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
4.2.4 Removal of the L mount unit
1. Remove 1 screw (C) and 3 screws (D).
4.2.5 Removal of the Rear frame unit
1. Remove 3 screws (E) and disconnect 1 connector.

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
4.2.6 Removal of the Lens P.C.B.unit and the Lens mount contact unit
1. Disconnect 4 connectors.
4.2.7 Removal of the Ring mount base
1. Remove 3 screws (F).
2. Remove 2 screws (G) and the Zoom drive pin.

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
4.2.8 Removal of the Wave washer
1. Remove the Wave washer.
4.2.9 Removal of the 1st lens holder and the Cam barrel
1. Rotate the Cam barrel clockwise when you watch it from back.

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
4.2.10 Removal of the OIS switch
1. Remove the hook of the OIS switch.
4.2.11 Removal of the Lens mount contact unit
1. Disconnect 1 connector.
4.3 Assembly procedure
Important:

4.3.1 Installation of the Filter ring
1. 

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
(Torque Driver : RFKZ0456)
(Torque : 10±1 N cm)
4.3.2 Installation of the Decoration ring
1. Please insert the dent of the Decoration ring to the convex of the Filter ring.
Use new one, do not use the one which is removed.
Double-stick tape sticks to the Decoration ring of therepair part.
Please remove the old double-stick tape from the Lenstop unit.
2. After installing the Decoration ring, use a soft cloth to press it into place.

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
4.3.3 Installation of the Lens mount contact unit
1. Connect 1 connector.
4.3.4 Installation of the OIS switch
1. Hook the upperside hook.
Then, push the underside hook into.
4.3.5 Installation of the 1st lens holder and the Cam barrel
1. Align phase marks(Look in ) and rotate the Cam barrel unticlockwise when you watch it from back.
4.3.6 Installation of the Wave washer
1. Install the Wave washer.

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
4.3.7 Installation of the Ring mount base
1. 
(Torque Driver : RFKZ0456)
(Torque : 10 ± 1 N cm)
2. 
(Torque Driver : RFKZ0456)
(Torque : 10 ± 1 N cm)

file:///C|/U...emp/Rar$EXa0.846/viewing/SGML_VIEW_DATA/ALL/H-FS14140PP/SVC/DSC1305023CE/doc/DSC1305023CE_04.xml[11/12/2018 11:35:59 AM]
4.3.8 Installation of the Lens P.C.B.unit and the Lens mount contact unit
1. Connect 4 connectors.
4.3.9 Installationl of the Rear frame unit
1. 
(Torque Driver : RFKZ0456)
(Torque : 8 ± 1 N cm)