Panasonic LP-V10U-C User manual

LP-V Series / LP-W Series
FAYb Laser Marker
LP-V10U-C LP-V15U-C LP-W052U-C
Item Model
Work distance 190mm (note 1) 350mm (note 1) 127mm (note 1)
Marking method Galvanometer scanning method
Marking laser Fibre laser λ= 1.06µm, laser class 4
Ave. output 12W model 5W model
Max. output 15W (note 2) 7.5W (note 2)
Guide laser, pointer Semiconductor fibre λ= 650nm, laser class 2
Max. output 1mW
Marking range (mm) 90 x 90 160 x 160 55 x 55
Scanning speed Max. 12000mm/s Max. 6000mm/s
Line speed Max. 240m/min. (note 3) Max. 120m/min (note 3)
Character setting
(Height & width)
0.2 to 90mm
(adjustable in increments of 0.001 mm)
0.2 to 160mm
(adjustable in increments of 0.001mm)
0.2 to 55mm
(adjustable in increments of 0.001mm)
Marking spacing
(spacing & pitch)
0 to 90mm
(adjustable in increments of 0.001mm)
Fan-like: +/-180°
(adjustable in increments of 0.01°)
0 to 160mm
(adjustable in increments of 0.001mm)
Fan-like: +/-180°
(adjustable in increments of 0.01°)
0 to 55mm
(adjustable in increments of 0.001mm)
Fan-like: +/-180°
(adjustable in increments of 0.01°)
Array of character Straight line, fan-like, proportional/typewriter fonts, tilted and fan-like
Type of characters Capital & small characters, figures, katakana, hiragana, kanji (JIS level 1 & level 2),
symbols, user-defined characters (up to 50 types)
Bar codes CODE39, CODE128, ITF2/5, NW-7, JAN/UPC/EAN, RSS 14, RSS limited, RSS expanded
2D codes QR, Micro QR, Data Matrix (ECC200)
Logo/shape BMP / DXF / HPGL / JPEG
Cooling method Forced-aired cooling
Supply voltage 90 to 132VAC or 180 to 264VAC (auto-changing), 50/60Hz
Power consumption 390VA or less (at 100VAC) 310 VA or less (at 100VAC)
Input Remote, trigger, encoder (A), encoder (B), shutter control, laser pumping, alarm reset, emergency stop, laser stop, confirmation end,
number, timehold
Output Power supply (+12V), remote (RS232C, I/O), marking ready, marking, marking finished, laser pumping, warning, alarm,
confirmation end, counter finish
Marking condition Stationary, (for moving objects)
Functions
Marking order optimising • correction of intersection • counter marking
• current date/time marking • expiry date • lot marking • logos/pictures • bold marking • logo data USB transfer
• I/O monitor • system offset • common setting • laser pointer • font select • proportional marking • marking image display
• operator adjustment • error code display • work image display • guide laser • power speed setting per line/logo file • step & repeat
• time delay • serial data processing & marking • multilayered marking • backup • various processing functions
• dual pointer • marking time measurement • font creation/editing • power check/correction
Emergency stop switch Provided on the controller
Ambient temperature 0 to +40°C (no condensation or frost), storage: -10 to 60°C
Ambient humidity 35 to 85%RH (no condensation or frost)
Weight Head: approx. 9kg
Controller: approx. 22kg
Head: approx. 10kg
Controller: approx. 22kg
Head: approx. 9kg
Controller: approx. 22kg
SPECIFICATIONS
Note 1: The work distance has an individual error of ±2.0mm from product to product.
Note 2: The maximum output refers to a maximum value of laser light output that a laser oscillator can output.
Note 3: The line speed varies depending on the application.
11/2007