Panasonic Zener Diodes MAZ8xxxG Series User manual

Zener Diodes
Publication date: July 2008 SKE00032BED 1
This product complies with RoHS Directive (EU 2002/95/EC).
MAZ8xxxG Series
Silicon planar type
For stabilization of power supply
Features
Extremely low noise voltage caused from the diode (2.4 V to
39V, 1/3 to 1/10 of our conventional MAZ3xxx series)
Extremely good rising performance (in the low-current range)
Easy-to-select the optimum diode because of their finely divided
zener-voltage ranks
Guaranteed reliability, equivalent to that of conventional products
(Mini type package)
Allowing to reduce the mounting area, thickness and weight
substantially, compared with those of the conventional products
Allowing both reflow and flow mode of automatic soldering
Allowing automatic mounting by an existing chip mounter
Absolute Maximum Ratings Ta= 25°C
Parameter Symbol Rating Unit
Repetitive peak forward current IFRM 200 mA
Power dissipation *PD150 mW
Junction temperature Tj150 °C
Storage temperature Tstg –55 to +150 °C
Note) *: PD= 150 mW achieved with a printed circuit board.
Common Electrical Characteristics Ta= 25°C±3°C
Parameter Symbol Conditions Min Typ Max Unit
Forward voltage VFIF= 10 mA 0.9 1.0 V
Zener voltage *1VZIZSpecified value V
Zener rise operating resistance RZK IZSpecified value Refer to the list of the
electrical characteristics
within part numbers
W
Zener operating resistance RZIZSpecified value W
Reverse current IRVRSpecified value mA
Temperature coefficient of zener voltage *2SZIZSpecified value mV/°C
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Absolute frequency of input and output is 5 MHz.
3. The temperature must be controlled 25°C for VZmesurement.
VZvalue measured at other temperature must be adjusted to VZ(25°C)
4. *1 : VZguaranted 20 ms after current flow.
*2: Tj= 25°C to 150°C
Package
Code
SMini2-F3
Pin Name
1: Anode
2: Cathode
Marking symbol
Refer to the list of the electrical
characteristics within part numbers

MAZ8xxxG Series
2SKE00032BED
This product complies with RoHS Directive (EU 2002/95/EC).
Electrical Characteristics within Part Numbers Ta= 25°C±3°C
Part number
Zener voltage
VZ(V)
Reverse
current
IR( mA)
Zener
operating
resistance
RZ(W)
Zener rise
operating
resistance
RZK (W)
Temperature
coefficient of
zener voltage
SZ(mV/°C)Marking symbol
IZ
(mA)
VR
(V)
IZ
(mA)
IZ
(mA)
IZ
(mA)
Min Typ Max Max Max Max Typ
MAZ8024G0L 2.28 2.40 2.60 5 120 1.0 100 5 –1.6 5 2.4
MAZ8027G0L 2.50 2.70 2.90
5 120 1.0 110 5 –2.0 5
2_7 or 2^7
MAZ8027GLL 2.50 2.60 2.75 2_7
MAZ8027GHL 2.65 2.80 2.90 2^7
MAZ8030G0L 2.80 3.00 3.20
5 50 1.0 120 5 –2.1 5
3_0 or 3^0
MAZ8030GLL 2.80 2.90 3.05 3_0
MAZ8030GHL 2.95 3.10 3.20 3^0
MAZ8033G0L 3.10 3.30 3.50
5 20 1.0 130 5 –2.4 5
3_3 or 3^3
MAZ8033GLL 3.10 3.20 3.35 3_3
MAZ8033GHL 3.25 3.40 3.50 3^3
MAZ8036G0L 3.40 3.60 3.80
5 10 1.0 130 5 –2.4 5
3_6 or 3^6
MAZ8036GLL 3.40 3.50 3.65 3_6
MAZ8036GHL 3.55 3.70 3.80 3^6
MAZ8039G0L 3.70 3.90 4.10
5 10 1.0 130 5 –2.5 5
3_9 or 3^9
MAZ8039GLL 3.70 3.80 3.97 3_9
MAZ8039GHL 3.87 4.00 4.10 3^9
MAZ8043G0L 4.00 4.30 4.60
5 10 1.0 130 5 –2.5 5
4_3, 4-3 or 4^3
MAZ8043GLL 4.03 4.10 4.26 4_3
MAZ8043GML 4.17 4.30 4.40 4-3
MAZ8043GHL 4.31 4.40 4.54 4^3
MAZ8047G0L 4.40 4.70 5.00
5 2.0 1.0 80 5 800 1.0 –1.4 5
4_7, 4-7 or 4^7
MAZ8047GLL 4.45 4.60 4.69 4_7
MAZ8047GML 4.59 4.70 4.83 4-7
MAZ8047GHL 4.74 4.90 4.99 4^7
MAZ8051G0L 4.80 5.10 5.40
5 1.0 2.0 60 5 500 1.0 – 0.8 5
5_1, 5-1 or 5^1
MAZ8051GLL 4.87 5.00 5.12 5_1
MAZ8051GML 5.00 5.10 5.26 5-1
MAZ8051GHL 5.14 5.30 5.40 5^1
MAZ8056G0L 5.30 5.60 6.00
5 0.5 2.5 40 5 200 0.5 1.2 5
5_6, 5-6 or 5^6
MAZ8056GLL 5.30 5.40 5.58 5_6
MAZ8056GML 5.48 5.60 5.76 5-6
MAZ8056GHL 5.66 5.80 5.95 5^6
MAZ8062G0L 5.80 6.20 6.60
5 0.2 4.0 30 5 100 0.5 2.3 5
6_2, 6-2 or 6^2
MAZ8062GLL 5.85 6.00 6.15 6_2
MAZ8062GML 6.05 6.20 6.36 6-2
MAZ8062GHL 6.24 6.40 6.56 6^2
MAZ8068G0L 6.40 6.80 7.20
5 0.1 4.0 20 5 60 0.5 3 5
6_8, 6-8 or 6^8
MAZ8068GLL 6.44 6.60 6.77 6_8
MAZ8068GML 6.64 6.80 6.98 6-8
MAZ8068GHL 6.85 7.00 7.20 6^8

MAZ8xxxG Series
SKE00032BED 3
This product complies with RoHS Directive (EU 2002/95/EC).
Electrical Characteristics within Part Numbers (Continued) Ta= 25°C±3°C
Part number
Zener voltage
VZ(V)
Reverse
current
IR( mA)
Zener
operating
resistance
RZ(W)
Zener rise
operating
resistance
RZK (W)
Temperature
coefficient of
zener voltage
SZ(mV/°C)Marking symbol
IZ
(mA)
VR
(V)
IZ
(mA)
IZ
(mA)
IZ
(mA)
Min Typ Max Max Max Max Typ
MAZ8075G0L 7.00 7.50 7.90
5 0.1 5.0 20 5 60 0.5 4.0 5
7_5, 7-5 or 7^5
MAZ8075GLL 7.07 7.30 7.43 7_5
MAZ8075GML 7.29 7.50 7.67 7-5
MAZ8075GHL 7.51 7.70 7.89 7^5
MAZ8082G0L 7.70 8.20 8.70
5 0.1 5.0 20 5 60 0.5 4.6 5
8_2, 8-2 or 8^2
MAZ8082GLL 7.77 7.90 8.17 8_2
MAZ8082GML 8.03 8.20 8.43 8-2
MAZ8082GHL 8.29 8.50 8.70 8^2
MAZ8091G0L 8.50 9.10 9.60
5 0.1 6.0 20 5 60 0.5 5.5 5
9_1, 9-1 or 9^1
MAZ8091GLL 8.58 8.80 9.02 9_1
MAZ8091GML 8.87 9.10 9.33 9-1
MAZ8091GHL 9.14 9.40 9.60 9^1
MAZ8100G0L 9.40 10.00 10.60
5 0.05 7.0 30 5 60 0.5 6.4 5
10_, 10- or 10^
MAZ8100GLL 9.44 9.70 9.92 10_
MAZ8100GML 9.75 10.00 10.25 10-
MAZ8100GHL 10.07 10.30 10.59 10^
MAZ8110G0L 10.40 11.00 11.60
5 0.05 8.0 30 5 60 0.5 7.4 5
11_, 11- or 11^
MAZ8110GLL 10.40 10.70 10.94 11_
MAZ8110GML 10.73 11.00 11.28 11-
MAZ8110GHL 11.05 11.30 11.60 11^
MAZ8120G0L 11.40 12.00 12.70
5 0.05 9.0 30 5 80 0.5 8.4 5
12_, 12- or 12^
MAZ8120GLL 11.40 11.70 11.96 12_
MAZ8120GML 11.73 12.00 12.33 12-
MAZ8120GHL 12.06 12.30 12.68 12^
MAZ8130G0L 12.40 13.00 14.10
5 0.05 10.0 35 5 80 0.5 9.4 5
13_, 13- or 13^
MAZ8130GLL 12.40 12.70 12.99 13_
MAZ8130GML 12.73 13.00 13.40 13-
MAZ8130GHL 13.25 13.70 14.08 13^
MAZ8140GML 13.65 14.00 14.35 5 0.05 10.0 40 5 80 0.5 10.0 5 14-
MAZ8150G0L 13.90 15.00 15.60
5 0.05 11.0 40 5 80 0.5 11.4 5
15_, 15- or 15^
MAZ8150GLL 13.90 14.30 14.76 15_
MAZ8150GML 14.60 15.00 15.35 15-
MAZ8150GHL 14.95 15.30 15.60 15^
MAZ8160G0L 15.30 16.00 17.10
5 0.05 12.0 50 5 80 0.5 12.4 5
16_, 16- or 16^
MAZ8160GLL 15.30 15.70 16.09 16_
MAZ8160GML 15.70 16.00 16.50 16-
MAZ8160GHL 16.26 16.70 17.10 16^
MAZ8180G0L 16.90 18.00 19.10
5 0.05 13.0 60 5 80 0.5 14.4 5
18_, 18- or 18^
MAZ8180GLL 16.90 17.30 17.76 18_
MAZ8180GML 17.55 18.00 18.45 18-
MAZ8180GHL 18.20 18.70 19.10 18^

MAZ8xxxG Series
4SKE00032BED
This product complies with RoHS Directive (EU 2002/95/EC).
Electrical Characteristics within Part Numbers (Continued) Ta= 25°C±3°C
Part number
Zener voltage
VZ(V)
Reverse
current
IR( mA)
Zener
operating
resistance
RZ(W)
Zener rise
operating
resistance
RZK (W)
Temperature
coefficient of
zener voltage
SZ(mV/°C)Marking symbol
IZ
(mA)
VR
(V)
IZ
(mA)
IZ
(mA)
IZ
(mA)
Min Typ Max Max Max Max Typ
MAZ8200G0L 18.80 20.00 21.20
5 0.05 15.0 80 5 100 0.5 16.4 5
20_, 20- or 20^
MAZ8200GLL 18.85 19.30 19.81 20_
MAZ8200GML 19.50 20.00 20.50 20-
MAZ8200GHL 20.15 20.70 21.19 20^
MAZ8220G0L 20.80 22.00 23.30
5 0.05 17.0 80 5 100 0.5 18.4 5
22_, 22- or 22^
MAZ8220GLL 20.80 21.30 21.86 22_
MAZ8220GML 21.45 22.00 22.55 22-
MAZ8220GHL 22.10 22.70 23.24 22^
MAZ8240G0L 22.80 24.00 25.60
5 0.05 19.0 100 5 120 0.5 20.4 5
24_, 24- or 24^
MAZ8240GLL 22.80 23.30 23.97 24_
MAZ8240GML 23.50 24.00 24.70 24-
MAZ8240GHL 24.35 25.00 25.60 24^
MAZ8270G0L 25.10 27.00 28.90
2 0.05 21.0 120 2 120 0.5 23.4 2
27_, 27- or 27^
MAZ8270GLL 25.30 26.00 26.70 27_
MAZ8270GML 26.30 27.00 27.70 27-
MAZ8270GHL 27.30 28.00 28.70 27^
MAZ8300G0L 28.00 30.00 32.00
2 0.05 23.0 160 2 160 0.5 26.6 2
30_, 30- or 30^
MAZ8300GLL 28.30 29.00 29.70 30_
MAZ8300GML 29.30 30.00 30.80 30-
MAZ8300GHL 30.20 31.00 31.80 30^
MAZ8330G0L 31.00 3300 35.00
2 0.05 25.0 200 2 200 0.5 29.7 2
33_, 33- or 33^
MAZ8330GLL 31.20 32.00 32.80 33_
MAZ8330GML 32.20 33.00 33.80 33-
MAZ8330GHL 33.20 34.00 34.90 33^
MAZ8360G0L 34.00 36.00 38.00
2 0.05 27.0 250 2 250 0.5 33.0 2
36_, 36- or 36^
MAZ8360GLL 34.10 35.00 35.90 36_
MAZ8360GML 35.10 36.00 36.90 36-
MAZ8360GHL 36.10 37.00 37.90 36^
MAZ8390G0L 37.00 39.00 41.00
2 0.05 30.0 300 2 300 0.5 35.6 2
39_, 39- or 39^
MAZ8390GLL 37.10 38.00 39.00 39_
MAZ8390GML 38.00 39.00 40.00 39-
MAZ8390GHL 39.00 40.00 41.00 39^

MAZ8xxxG Series
SKE00032BED 5
This product complies with RoHS Directive (EU 2002/95/EC).
IZVZIZVZRZIZ
00 2001601208040
50
100
150
200
250
Ambient temperature Ta(°C)
Power dissipation PD(mW)
Heat sink
Copper foil
0.8 mm ×0.8 mm
10−3
0 2 4 6 8 10 12
10−2
10−1
1
10
102
Zener voltage VZ(V)
Zener current IZ(mA)
Ta= 25°C
Static
Charac-
teristics
MAZ8062G
MAZ8068G
MAZ8075G
MAZ8082G
MAZ8091G
MAZ8100G
MAZ8024G
MAZ8039G
MAZ8047G
MAZ8051G
MAZ8043G
MAZ8056G
0 10 20 30 40 50 60
Zener voltage VZ(V)
Zener current IZ(mA)
10−3
10−2
10−1
1
10
102
Ta= 25°C
Static
Charac-
teristics
MAZ8160G
MAZ8200G
MAZ8240G
MAZ8360G
MAZ8390G
MAZ8110G
MAZ8130G
0 2 4 6 8 10 12
Zener voltage VZ(V)
Zener current IZ(mA)
10−3
10−2
10−1
1
10
102
Tj= 25°C
Dynamic
Charac-
teristics
MAZ8100G
MAZ8091G
MAZ8082G MAZ8075G MAZ8068G MAZ8062G MAZ8056G MAZ8051G MAZ8047G MAZ8043G MAZ8039G MAZ8033G MAZ8027G MAZ8024G
0 10 20 30 40 50 60
Zener voltage VZ(V)
Zener current IZ(mA)
10−3
10−2
10−1
1
10
102
Tj= 25°C
Dynamic
Charac-
teristics
MAZ8110G MAZ8130G MAZ8160G MAZ8200G MAZ8240G MAZ8360G MAZ8390G
1
10
102
103
10−11 102 10 103
Zener operating resistance RZ(Ω)
Zener current IZ(mA)
Ta = 25°C
MAZ8047G
MAZ8039G
MAZ8051G
MAZ8056G
MAZ8062G
MAZ8068G
MAZ8160G
MAZ8390G
MAZ8024G
MAZ8100G
MAZ8082G
MAZ8043G
IFVFSZIZ
10−2
0 0.2 0.4 0.6 1.00.8 1.2
10−1
1
10
102
Forward voltage VF(V)
Forward current IF(mA)
Ta= 25°C
15
5
−5
20
25
0
10
0 10 20 40 5030
Zener current IZ(mA)
Temperature coefficient of zener voltage
SZ(mV / °C)
MAZ8240G
MAZ8160G
MAZ8100G
MAZ8068G
MAZ8039G
MAZ8024G
PDTaIZVZIZVZ

MAZ8xxxG Series
6SKE00032BED
This product complies with RoHS Directive (EU 2002/95/EC).
PZSM tW Zth tW
10−1
1
10
10−2
102 10110−1 10−2
Pulse width tW(s)
Transient thermal impedance Zth (°C / mW)
With head sink (Typ. value)
Without heat sink (Typ. value)
Heat sink
Copper foil 0.8 mm ×0.8 mm
1
10
102
10−1
102 10110−1 10−2
Pulse width tW(ms)
Non-repetitive reverse surge power dissipation PZSM (W)
MAZ8039G
MAZ8075G
Ta= 25°C
tW
Non repetitive
PZSM

MAZ8xxxG Series
SKE00032BED 7
This product complies with RoHS Directive (EU 2002/95/EC).
SMini2-F3 Unit: mm
1.25 ±0.10
0.13 +0.05 −0.02
0.50 ±0.05
2
1
0.35 ±0.05
0.7 ±0.1
5°
(0.15)
2.5 ±0.2 1.7 ±0.10.4 ±0.1
0 to 0.05
5°

Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.