Panasonic AK-HRP1000G User manual

DVQP1627ZA
W0817MN0 -PS
ENGLISH
For details of operating Remote Operation Panel AK-HRP1000G, please
visit the Panasonic website (http://pro-av.panasonic.net/en/manual/index.
html), and refer to the Operating Instructions (HTML or PDF).
Read this document when using the AK-HRP1000G Remote Operation Panel in
conjunction with AW-HR140 or AW-HE130 Series HD Integrated Cameras.
Operating Guide
Remote Operation Panel
Model No. AK-HRP1000G

Connecting the Unit to AW-HR140/AW-HE130
Series Cameras 3
Connection examples 3
Connections 5
Compatible Functions List 6
ROP Menu (when AW-HR140/AW-HE130 is
connected) 10
ROP menu list 10
01 SHUTTER SPEED 15
02 PEDESTAL 16
03 CHROMA 17
04 GAIN 18
05 WHITE BALANCE 19
06 GAMMA 20
07 KNEE 21
08 WHITE CLIP 22
09 DETAIL 23
10 MATRIX 24
11 COLOR CORRECTION 25
12 DNR 28
13 DIGTAL HAZE CLEAR 29
14 HOUSING 30
15 BRIGHTNESS 31
16 LENS CONTROL 32
17 SYSTEM CAM 33
18 CAMERA MENU CONTROL 34
19 ROP SETTING 35
20 CONNECT SETTING 36
21 ROP IP SETTING 37
22 CAMERA IP SETTING 37
- 2 -
Table of Contents

Connecting the Unit to AW-HR140/AW-HE130 Series
Cameras
Connection examples
Serial connection with AW-HR140
External DC
power supply
<RS-422> connector
HD Integrated Camera
AW-HR140
* Prepare a cable that is in accordance
with the following serial connection
cable specifications.
PoE compatible
switching hub or injector
IP connection with AW-HR140
LAN cable (straight cable)
External DC
power supply
<LINK/ACT> connector
HD Integrated Camera
AW-HR140
LAN cable (straight cable)
Switching hub with
PoE support
- 3 -
Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Serial connection with AW-HE130
External DC
power supply
<RS-422> connector
HD Integrated Camera
AW-HE130
* Prepare a cable that is in accordance
with the following serial connection
cable specifications.
PoE compatible
switching hub or injector
IP connection with AW-HE130
HD Integrated Camera
AW-HE130
<LINK/ACT> connector
Switching hub with
PoE support
LAN cable (straight cable)
LAN cable (straight cable)
External DC
power supply
Serial connection cable specifications
ヒヤモヮチチュモヵユドラナ⾺⾺⾼⾼ビヤヰヮチチュモヵユドロナピヤヰヮチチヤヰワヵドラナフヤヰヮチチヤヰワヵドロナヤモヮēチンヰヱヤモヮēチンヰヱンヰヱチēチヤモヮンヰヱチēチヤモヮブヤヰヮチチワㄐハチモプヤヰヮチチワㄐハチャヘヤヰヮチチワㄐハチヤベヤヰヮチチワㄐハチュペ
ヒビチヷ
ヒパヨワュヒヨンュヵモロロヺンヹュノヵヹュノヵヹュヌンヹュヌチ⾼チ⾼ビピフブプヘベラㄊㄓㄐㄔㄆホチランヒパモノヒパヱノヒパブドヘピナAW-HR140/AW-HE130
<RS-422> connector side (RJ45)
AK-HRP1000G
[CCU] connector side
Pin No. Function Polarity Flow of signal
- 4 -
Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Connections
Set the connection setting to [Serial(AW2)] or [LAN(AW2)] in the [CONNECT SETTING] menu.
ヤヰワワユヤヵチヴユヵヵリワヨ
ヒチバチヒヒ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ワヰワワヰワ
ヤモヮベヤモヮペ
ヴㄆㄓㄊ㄂ㄍドモヸビナロモワドモヸビナワヰワワヰワワヰワワヰワ
ヤモヮフ
ワヰワ
ヤモヮヘヤモヮビヤモヮピヤモヮヒヤモヮブヤモヮプ
NOTE
To connect with the AW-HR140/AW-HE130, upgrade the system version of the unit to 4.30-00-0.00 or later.
When connecting, observe the following points.
Serial connection
Use a dedicated cable to connect the [CCU] connector of this unit to the <RS-422> connector of the AW-HR140/AW-
HE130.
Use a PoE power supply for the power supply.
LAN connection
Connect the [LAN] connector on this unit to the <LINK/ACT> connector on the AW-HR140/AW-HE130 using a LAN
cable (sold separately).
Configure the camera IP address and port number settings of the connection destinations in [CAMERA IP SETTING] as
well.
This unit can be powered using PoE. Use a switching hub with PoE support.
Use a straight cable (category 5e or higher; up to 100 m (328.0 ft) in length) for the LAN cable (STP).
For details on switching hubs and PoE injectors that have been verified to support PoE, consult with your dealer.
- 5 -
Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Compatible Functions List
When the unit is used in conjunction with an AW-HR140 Series or AW-HE130 Series HD Integrated Camera, there will be functions that are
limited or disabled for some of the unit’s buttons, dials, and other controls. Be sure to refer to the following table.
Front panel 1
Front panel 2
Front panel 3
Front panel 4
Front panel 5
Front panel 6
Front panel 7
Front panel 8
Front panel 9
Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 1
[POWER HEAD] button ✓
[POWER VF] button ×
[BARS/TEST] button ✓Only the ON/OFF for the color bar signal
output will function.
[REF. RECALL] button ×
[AUTO WHITE] button ✓
[AUTO BLACK] button ✓
[AUTO SET UP] button ×
[CHARA] button ×
[MATRIX] button ×
[SKIN DTL] button ×
[DRS] button ✓
[B.GAMMA] button ×
[ASSIGN] button ✓
- 6 -
Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 2
[ASSIGN STATUS] button ✓
Buttons [1] to [5] (CONTROL/MODE) ✓
[CONTROL/MODE] button ✓
Front panel 3
LCD panel ✓
[MENU] dial ✓
[EXIT] button ✓
[UNDO] button ✓
[MENU] button ✓
Front panel 4
[ON] indicator (SCENE FILE) ✓This is always lit.
Scene file page switching button ×
[1/6], [2/7], [3/8], [4/EXT1], and [5/EXT2]
buttons (SCENE FILE)
✓Only scenes 1 to 4 are enabled.
[STORE] button ×
Front panel 5
[ND] indicator ✓
[ND] setting button ✓
[ND] display ✓
[CC] indicator ×
[CC] setting button ×
[CC] display ×
[HEAD] button ×
[ECC] button ×
[M.GAIN] indicator ✓
[M.GAIN] setting button ✓
[M.GAIN] display ✓
[VAR] button ×
Front panel 6
[SHUTTER] display ✓“----” is displayed on the [SHUTTER] display
when the synchro shutter is selected. Also,
the [SHUTTER] setting buttons cannot be
used.
When the shutter speed value is “10000”,
“9999” is displayed.
[ON] button (SHUTTER) ✓
[SYNC] button (SHUTTER) ✓
[SHUTTER] setting buttons ✓“----” is displayed on the [SHUTTER] display
when the synchro shutter is selected. Also,
the [SHUTTER] setting buttons cannot be
used.
- 7 -
Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 7
[GAIN R] and [GAIN B] dials ✓
[GAIN G] dial ×
[BLACK R] and [BLACK B] dials ✓Only the pedestal can be adjusted.
[BLACK G] dial ×
[FLARE] button ✓Stabilized using the pedestal adjustment.
Flare adjustment cannot be performed.
[PAINT LOCK] button ✓
[DTL] dial ✓UHD detail adjustment cannot be performed.
[CAM SEL] indicator ✓
[SELECT] dial ✓[SYNC] and [M.FLR] adjustment cannot be
performed.
[TEMP] indicator ✓
[SYNC] indicator ×
[MFLR] indicator ×
[USER] indicator ✓
Front panel 8
[EXT] indicator ×
[D.EXT] indicator ✓
[IRIS] lever ✓
[M.PED] dial ✓
[RELATIVE] button ✓
[SENSE] dial ✓
[COARSE] dial ✓
[IRIS] display ×
[AUTO] button ✓When the auto iris function is enabled, the
iris gauge that appears at the bottom of the
LCD panel (status screen) will not operate.
[CLOSE] button ✓
[M.PED] display ✓When the setting value is -100 to -150 and
100 to 150, display is as follows because
there is a limit to the number of display digits.
150: F0
140 to 149: E0 to E9
130 to 139: d0 to d9
120 to 129: C0 to C9
110 to 119: b0 to b9
100 to 109: A0 to A9
-100 to -109: -A0 to -A9
-110 to -119: -b0 to -b9
-120 to -129: -C0 to -C9
-130 to -139: -d0 to -d9
-140 to -149: -E0 to -E9
-150: -F0
[IRIS LOCK] button ✓
[M.PED LOCK] button ✓
- 8 -
Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 9
Camera number/tally display ✓
[ALM] indicator ✓
[OPT] indicator ×
[PANEL ACTIVE] button ✓
[CALL] button ×
[PREVIEW] button ✓
Memory card slot ✓
Memory card access indicator ✓
Torque adjustment screw ✓
- 9 -
Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

ROP Menu (when AW-HR140/AW-HE130 is connected)
ROP menu list
When an AW-HR140/AW-HE130 HD Integrated Camera is connected, the ROP menu will be as follows. The setting values will vary
depending on the connected model. Depending on the model, unsupported functions will be displayed as [-].
For details on menu operations, refer to the following sections in the Operating Instructions.
“Displaying menus”
“Basic menu operations”
01 SHUTTER SPEED
MODE “MODE” (see page 15)
SPEED “SPEED” (see page 15)
02 PEDESTAL
M.PED “M.PED” (see page 16)
PED R “PED R” (see page 16)
PED B “PED B” (see page 16)
03 CHROMA LEVEL (%) “LEVEL (%)” (see page 17)
04 GAIN
SUPER GAIN “SUPER GAIN” (see page 18)
GAIN “GAIN” (see page 18)
AGC MAX GAIN “AGC MAX GAIN” (see page 18)
05 WHITE BALANCE
MODE “MODE” (see page 19)
COLOR TEMP “COLOR TEMP” (see page 19)
GAIN R “GAIN R” (see page 19)
GAIN B “GAIN B” (see page 19)
ATW SPEED “ATW SPEED” (see page 19)
ATW WIDTH “ATW WIDTH” (see page 19)
06 GAMMA
TYPE “TYPE” (see page 20)
GAMMA “GAMMA” (see page 20)
DRS “DRS” (see page 20)
07 KNEE
KNEE MODE “KNEE MODE” (see page 21)
KNEE POINT “KNEE POINT” (see page 21)
KNEE SLOPE “KNEE SLOPE” (see page 21)
08 WHITE CLIP
WHITE CLIP “WHITE CLIP” (see page 22)
WHITE CLP LV(%) “WHITE CLP LV(%)” (see page 22)
09 DETAIL
M.DTL “M.DTL” (see page 23)
V DTL LEVEL “V DTL LEVEL” (see page 23)
DTL BAND “DTL BAND” (see page 23)
NOISE SUPPRESS “NOISE SUPPRESS” (see page 23)
FLSHTN NIS SUP. “FLSHTN NIS SUP.” (see page 23)
SW “SW” (see page 23)
10 MATRIX
TYPE “TYPE” (see page 24)
R-G “R-G” (see page 24)
R-B “R-B” (see page 24)
G-R “G-R” (see page 24)
G-B “G-B” (see page 24)
B-R “B-R” (see page 24)
B-G “B-G” (see page 24)
- 10 -
ROP Menu (when AW-HR140/AW-HE130 is connected)

11 COLOR CORRECTION
TYPE “TYPE” (see page 26)
COLOR CORRECT “COLOR CORRECT” (see page 26)
SAT “SAT” (see page 26)
PHASE “PHASE” (see page 26)
SAT B_Mg “SAT B_Mg” (see page 26)
PHASE B_Mg “PHASE B_Mg” (see page 26)
SAT Mg “SAT Mg” (see page 26)
PHASE Mg “PHASE Mg” (see page 26)
SAT Mg_R “SAT Mg_R” (see page 26)
PHASE Mg_R “PHASE Mg_R” (see page 26)
SAT Mg_R_R “SAT Mg_R_R” (see page 26)
PHASE Mg_R_R “PHASE Mg_R_R” (see page 26)
SAT R “SAT R” (see page 26)
PHASE R “PHASE R” (see page 26)
SAT R_R_Yl “SAT R_R_Yl” (see page 26)
PHASE R_R_Yl “PHASE R_R_Yl” (see page 26)
SAT R_Yl “SAT R_Yl” (see page 26)
PHASE R_Yl “PHASE R_Yl” (see page 26)
SAT R_Yl_Yl “SAT R_Yl_Yl” (see page 26)
PHASE R_Yl_Yl “PHASE R_Yl_Yl” (see page 26)
SAT Yl “SAT Yl” (see page 26)
PHASE Yl “PHASE Yl” (see page 26)
SAT Yl_G “SAT Yl_G” (see page 26)
PHASE Yl_G “PHASE Yl_G” (see page 26)
SAT G “SAT G” (see page 26)
PHASE G “PHASE G” (see page 26)
SAT G_Cy “SAT G_Cy” (see page 26)
PHASE G_Cy “PHASE G_Cy” (see page 27)
SAT Cy “SAT Cy” (see page 27)
PHASE Cy “PHASE Cy” (see page 27)
SAT Cy_B “SAT Cy_B” (see page 27)
PHASE Cy_B “PHASE Cy_B” (see page 27)
SAT B “SAT B” (see page 27)
PHASE B “PHASE B” (see page 27)
12 DNR DNR “DNR” (see page 28)
13 DIGTAL HAZE CLEAR
LEVEL “LEVEL” (see page 29)
SW “SW” (see page 29)
14 HOUSING
FAN “FAN” (see page 30)
HEATER “HEATER” (see page 30)
DFRSTR “DFRSTR” (see page 30)
WIPER “WIPER” (see page 30)
WASHER(push) “WASHER(push)” (see page 30)
15 BRIGHTNESS
PICTURE LEVEL “PICTURE LEVEL” (see page 31)
FRAME MIX “FRAME MIX” (see page 31)
DAY/NIGHT “DAY/NIGHT” (see page 31)
- 11 -
ROP Menu (when AW-HR140/AW-HE130 is connected)

16 LENS CONTROL
FOCUS MODE “FOCUS MODE” (see page 32)
FOCUS SPEED “FOCUS SPEED” (see page 32)
FOCUS “FOCUS” (see page 32)
ZOOM WIDE “ZOOM WIDE” (see page 32)
ZOOM SPEED “ZOOM SPEED” (see page 32)
ZOOM TELE “ZOOM TELE” (see page 32)
DIGITAL ZOOM SW “DIGITAL ZOOM SW” (see page 32)
DIGITAL ZOOM MAX “DIGITAL ZOOM MAX” (see page 32)
DIGITAL ZOOM D.EXT “DIGITAL ZOOM D.EXT” (see page 32)
17 SYSTEM CAM
FORMAT “FORMAT” (see page 33)
FREQUENCY “FREQUENCY” (see page 33)
3G SDI OUT “3G SDI OUT” (see page 33)
I.S. “I.S.” (see page 33)
OSD MIX SDI OUT “OSD MIX SDI OUT” (see page 33)
OSD MIX IP “OSD MIX IP” (see page 33)
OSD STATUS “OSD STATUS” (see page 33)
AUDIO “AUDIO” (see page 33)
GENLOCK PHASE “GENLOCK PHASE” (see page 33)
18 CAMERA MENU CONTROL
MENU ON/OFF “MENU ON/OFF” (see page 34)
CURSOR/PARAMETER “CURSOR/PARAMETER” (see page 34)
EXECUTE “EXECUTE” (see page 34)
- 12 -
ROP Menu (when AW-HR140/AW-HE130 is connected)

19 ROP SETTING
CONTROL(MENU)1 Refer to the following section in the Operating Instructions.
“34 ROP SETTING”
CONTROL(MENU)2
CONTROL(MENU)3
CONTROL(MENU)4
CONTROL(MENU)5
MODE(ON/OFF)1
MODE(ON/OFF)2
MODE(ON/OFF)3
MODE(ON/OFF)4
MODE(ON/OFF)5
ECC BTN CTRL
ASSIGN BUTTON
USER ASSIGN
IRIS LEV MOD
CAMERA SELECT
DTL VOL
SKIN DTL SW
LCD BRIGHT
PNL LED BRIGHT
7SEG BRIGHT GROUP1
7SEG BRIGHT GROUP2
BUZZER
PERIOD
CYCLE
STD POSITION M.PED
STD POSITION VAR
IRIS/PED LOCK
STD POSITION ND
STD POSITION CC
IRIS PRIORITY
ROP DATA SAVE
ROP DATA LOAD
INITIAL with NW
INITIAL
POWER BUTTON
IRIS CALIBRATION TOP
IRIS CALIBRATION BOTTOM
UPGRADE
SYSTEM VERSION
SOFT VERSION
FPGA VERSION
20 CONNECT SETTING
CONNECT MODE(push) CAM1 “CONNECT MODE(push) CAM1” (see page 36)
CONNECT MODE(push) CAM2
to CAM99 “CONNECT MODE(push) CAM2 to CAM99” (see page 36)
- 13 -
ROP Menu (when AW-HR140/AW-HE130 is connected)

21 ROP IP SETTING
ROP IP ADDRESS Refer to the following section in the Operating Instructions.
“36 ROP IP SETTING”
ROP PORT
UPLOAD
ROP SUBNET MASK
UPLOAD
ROP DEFAULT GATEWAY
UPLOAD
MAC ADDRESS
22 CAMERA IP SETTING
CAM1 to CAM99 IP ADDRESS Refer to the following section in the Operating Instructions.
“37 CAMERA IP SETTING”
CAM1 to CAM99 PORT
CAM1 to CAM99 INF UPLOAD
- 14 -
ROP Menu (when AW-HR140/AW-HE130 is connected)

01 SHUTTER SPEED
ヴラヶヵヵユンチヴヱユユュ
ヒチバチヒ
ヒパパ
ヮヰュユヴヱユユュ
ヰョョ
Item Setting details
MODE Selects the operation mode of the shutter.
SPEED Sets the shutter speed. The setting can be changed when [MODE] is [STEP].
The shutter speed of [SYNC] is not displayed.
- 15 -
ROP Menu (when AW-HR140/AW-HE130 is connected)

02 PEDESTAL
ヱユュユヴヵモロ
ヒチバチヒ
ンャ
パパ
ヮハヱユュヱユュ
パ
Item Setting details
M.PED Adjusts the black level of the master pedestal.
PED R Sets the correction level of red to the master pedestal.
PED B Sets the correction level of blue to the master pedestal.
- 16 -
ROP Menu (when AW-HR140/AW-HE130 is connected)

03 CHROMA
ヤランヰヮモ
ヒチバチヒ
ロユヷユロドテナ
パ
Item Setting details
LEVEL (%) Sets the color intensity of images.
- 17 -
ROP Menu (when AW-HR140/AW-HE130 is connected)

04 GAIN
[SUPER GAIN] is a function for only the AW-HR140.
ヨモリワ
ヒチバチヒ
ヴヶヱユンヨモリワモヨヤヮモヹチヨモリワヨモリワ
パヒベヰョョ
Item Setting details
SUPER GAIN Enables/disables the super gain (increased sensitivity) function.
GAIN Adjusts the gain of images.
AGC MAX GAIN When [AUTO] is selected as the [GAIN] setting, the maximum gain-up amount can be set.
- 18 -
ROP Menu (when AW-HR140/AW-HE130 is connected)

05 WHITE BALANCE
[ATW SPEED] and [ATW WIDTH] are functions for only the AW-HR140.
ヸラリヵユチャモロモワヤユ
ヒチバチヒ
ヮヰュユヤヰロヰンヵユヮヱモヸャチモ
ピビパパレ
ンャヨモリワ
パパ
モヵヸヴヱユユュヸリュヵラワヰンヮモロ
ブ
Item Setting details
MODE Sets the white balance mode.
COLOR TEMP Sets color temperature settings.
GAIN R Adjusts the R gain.
GAIN B Adjusts the B gain.
ATW SPEED Sets the control speed of the ATW function.
ATW WIDTH Sets the color temperature range to track with the ATW function.
- 19 -
ROP Menu (when AW-HR140/AW-HE130 is connected)

06 GAMMA
ヨモヮヮモ
ヒチバチヒ
ヵヺヱユヨモヮヮモラュ
パハフブ
ュンヴヰョョ
Item Setting details
TYPE Selects the type of gamma curve.
GAMMA Adjusts the gamma correction level.
DRS Sets the DRS function which performs correction when video with high light/dark contrast is displayed.
- 20 -
ROP Menu (when AW-HR140/AW-HE130 is connected)