Panasonic AK-HRP1015G User manual

DVQP2521ZAW0321AM0 -PS
ENGLISH
For details of operating Remote Operation Panel AK-HRP1015G, please
visit the Panasonic website (https://pro-av.panasonic.net/manual/en/index.
html), and refer to the Operating Instructions (HTML or PDF).
Read this document when using the AK-HRP1015G Remote Operation Panel in
conjunction with AK-UB300G Series Multi-Purpose Cameras.
Operating Guide
Remote Operation Panel
Model No. AK-HRP1015G

Connecting the Unit to AK-UB300G Series Cameras 3
System block diagram 3
Connections 4
Compatible Functions List 5
ROP Menu (when AK-UB300G is connected) 8
ROP menu list 8
01 PAINT SWITCH 14
02 SCENE 15
03 SHUTTER SPEED 16
04 FILTER 17
05 PEDESTAL 18
06 CHROMA 19
07 RB GAIN 20
08 COLOR TEMP 21
09 FLARE 22
10 GAMMA 23
11 BLACK GAMMA 24
12 KNEE 25
13 DETAIL 26
14 SKIN TONE DTL 28
15 MATRIX 30
16 COLOR CORRECTION 32
17 SKIN CORRECTION 35
18 DNR 36
19 HAZE REDUCTION 37
20 LENS CONTROL 38
21 SYSTEM CAM 39
22 CAMERA MENU CONTROL 40
23 ROP SETTING 41
24 CONNECT SETTING 42
25 ROP IP SETTING 43
26 CAMERA IP SETTING 43
27 AUTO IRIS SETTING 44
28 IRIS RELATIVE 45
29 HDR-PAINT 46
30 SWITCHER LINK 48
31 AW CONTROLLER LINK 48
- 2 -
Table of Contents

Connecting the Unit to AK-UB300G Series Cameras
NOTE
The descriptions in this document assume that the system version of the unit is V2.00-00-0.00 or later. Make sure that the system
version of the AK-UB300G used in conjunction with the unit is V7.52-000-00.00 or later.
System block diagram
This is the configuration for connecting one AK-UB300G and one remote operation panel.
A
B
C
IRIS
E
ZOOM/FOCUS
D
F
(AK-UB300G)
A. Remote control lens
B. HD monitor (for HD main line)
C. HD monitor (for HD monitor)
D. External DC power supply
E. UHD/HD monitor (for UHD/HD main line)
F. AK-HRP1015G
Video output
For UHD mode
For UHD main line: Use the output from the <UHD/HD SDI OUT 1> to <UHD/HD SDI OUT 4> terminals.
For HD main line: Use the output from the <HD SDI OUT 1> terminal.
For HD monitor: Use the output from the <HD SDI OUT 2> terminal.
For UHD CROP mode/HD mode
For HD main line: Use the output from the <HD SDI OUT 1> terminal, or the output from the <UHD/HD SDI OUT
1>/<UHD/HD SDI OUT 2> terminal.
For HD monitor: Use the output from the <HD SDI OUT 2> terminal.
Remote operation panel
Connect AK-HRP1015G to the <I/F> terminal or the <LAN> terminal of the AK-UB300G.
- 3 -
Connecting the Unit to AK-UB300G Series Cameras

Connections
Set the connection setting to [Serial(AW)] or [LAN(AW)] in the [CONNECT SETTING] menu.
ヒチバチヒヘ
ヤヰワワユヤヵチヴユヵヵリワヨヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナヤモヮビヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナヤモヮブヤモヮピヤモヮプヤモヮヒヤモヮフヴㄆㄓㄊ㄂ㄍドモヸナロモワドモヸナワヰワワヰワワヰワワヰワ
When connecting, observe the following points.
Serial connection
Use a dedicated cable to connect the [CCU] connector of this unit to the <I/F> terminal of the AK-UB300G.
Use a PoE injector for the power supply.
LAN connection
Connect the [LAN] connector on this unit to the <LAN> connector on the AK-UB300G using a LAN cable (sold
separately).
This unit can be powered using PoE. Use a switching hub with PoE support.
Use a straight cable (category 5e or higher; up to 100 m (328.0 ft) in length) for the LAN cable (STP).
For details on switching hubs and PoE injectors that have been verified to support PoE, consult with your dealer.
- 4 -
Connecting the Unit to AK-UB300G Series Cameras

Compatible Functions List
When the unit is used in conjunction with an AK-UB300G Series Multi-Purpose Camera, some of the unit's button, dial, and other control
functions will be limited or disabled. Be sure to refer to the following table.
NOTE
The descriptions in this document assume that the system version of the unit is V2.00-00-0.00 or later. Make sure that the system
version of the AK-UB300G used in conjunction with the unit is V7.52-000-00.00 or later.
Front panel 1
Front panel 2
Front panel 3
Front panel 4
Front panel 5
Front panel 6
Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 1
[PANEL LOCK] button ✓
[AUTO] button ✓If auto setup has been assigned, this will not
operate.
[BARS] button ✓Only the ON/OFF for the color bar signal
output will function.
[TALLY/CALL] lamp/button ×
[REF. RECALL] button ×
[FILES] button ✓This indicator is off when a scene file is not
selected.
[SETUP] button ✓
[AUTO IRIS] button ✓
Front panel 2
Function buttons ✓
LCD panel ✓
Menu operation dials ✓
- 5 -
Connecting the Unit to AK-UB300G Series Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 3
[GAIN] button ✓When this is set to ON, the white balance
menu appears on the LCD panel.
[SHT] button ✓When this is set to ON, the shutter menu
appears on the LCD panel.
[COLOR] button ✓The menus will switch with each press of the
button.
[COLOR TEMP] > [CHROMA] > [MATRIX] >
[SKIN CORRECTION] > menu off (status
screen)
[FILTER] button ✓Only the ND filter can be configured.
[GAMMA] button ✓
[FLARE] button ✓
[KNEE] button ✓
[DTL] button ✓The menus will switch with each press of the
button.
[DETAIL] > [SKIN TONE DTL] > [DNR] >
menu off (status screen)
Front panel 4
[GAIN], [TEMP], [GAMMA], [SKIN]
adjustment block
✓When [GAIN] is lit, “GAIN AWB R” and “GAIN
AWB B” are adjusted using the red (R) and
blue (B) adjustment dials respectively.
When [TEMP] is lit, “COLOR TEMP” is
adjusted using the green (G) adjustment
dial.
[GAMMA] adjustment is disabled.
When [SKIN] is lit, “Q PHASE”, “I CENTER”,
and “CRISP” are adjusted using the red (R),
green (G), and blue (B) adjustment dials
respectively.
[PED], [FLARE], [B.GAM] adjustment block ✓When [PED] is lit, “PED R” and “PED B” are
adjusted using the red (R) and blue (B)
adjustment dials respectively.
[FLARE] and [B.GAM] adjustments are
disabled.
- 6 -
Connecting the Unit to AK-UB300G Series Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 5
[ALM] indicator ✓
[OPT] indicator ×
[EXT] indicator ×
[D.EXT] indicator ×
Adjustment value display ✓The adjustment value of the CC filter is not
displayed.
[ND] indicator ✓
[CC] indicator ×
[IRIS] indicator ✓
[GAIN] indicator ✓
[PED] indicator ✓
[SHT] indicator ✓
[SYNC] indicator ✓
[DISP] button ✓
[UP (FREE)] button ✓
[DOWN (CHARA)] button ✓
[LOCK] indicator ✓
[SEL] dial ✓
Front panel 6
Memory card slot ✓
Memory card access indicator ✓
Camera number/tally display ✓Only camera numbers are displayed, but
starting with the following system version,
tally (red, green) display will also be possible
(only during LAN connection).
AK-UB300G: V7.52-000-00.00
This unit: V2.00-00-0.00
[IRIS RELATIVE] button ✓
Torque adjustment screw ✓
IRIS lever ✓
Master pedestal dial ✓
[PREVIEW] button ×
- 7 -
Connecting the Unit to AK-UB300G Series Cameras

ROP Menu (when AK-UB300G is connected)
ROP menu list
When an AK-UB300G Multi-Purpose Camera is connected, the ROP menu will be as follows.
NOTE
The descriptions in this document assume that the system version of the unit is V2.00-00-0.00 or later. Make sure that the system
version of the AK-UB300G used in conjunction with the unit is V7.52-000-00.00 or later.
For details on menu operations, refer to the following sections in the operating instructions.
“Displaying menus”
“Basic menu operations”
01 PAINT SWITCH
MATRIX “MATRIX” (see page 14)
LINEAR MATRIX “LINEAR MATRIX” (see page 14)
COLOR CORRECT “COLOR CORRECT” (see page 14)
SKIN DTL “SKIN DTL” (see page 14)
DTL “DTL” (see page 14)
DNR “DNR” (see page 14)
D. HAZE CLEAR “D. HAZE CLEAR” (see page 14)
DRS “DRS” (see page 14)
FLARE “FLARE” (see page 14)
GAMMA “GAMMA” (see page 14)
BLACK GAMMA “BLACK GAMMA” (see page 14)
KNEE “KNEE” (see page 14)
02 SCENE
SCENE1(push) “SCENE1(push)” (see page 15)
SCENE2(push) “SCENE2(push)” (see page 15)
SCENE3(push) “SCENE3(push)” (see page 15)
SCENE4(push) “SCENE4(push)” (see page 15)
SCENE5(push) “SCENE5(push)” (see page 15)
SCENE6(push) “SCENE6(push)” (see page 15)
SCENE7(push) “SCENE7(push)” (see page 15)
SCENE8(push) “SCENE8(push)” (see page 15)
BUTTON SEL MODE “BUTTON SEL MODE” (see page 15)
03 SHUTTER SPEED
SHUTTER SPEED “SHUTTER SPEED” (see page 16)
SHUTTER SYNCHRO “SHUTTER SYNCHRO” (see page 16)
SHUTTER SW “SHUTTER SW” (see page 16)
SHUTTER MODE “SHUTTER MODE” (see page 16)
04 FILTER ND “ND” (see page 17)
05 PEDESTAL
PED R “PED R” (see page 18)
PED B “PED B” (see page 18)
M. PED “M. PED” (see page 18)
06 CHROMA
CHROMA LEVEL “CHROMA LEVEL” (see page 19)
CHROMA LEVEL SW “CHROMA LEVEL SW” (see page 19)
07 RB GAIN
GAIN AWB R “GAIN AWB R” (see page 20)
GAIN AWB B “GAIN AWB B” (see page 20)
08 COLOR TEMP COLOR TEMP “COLOR TEMP” (see page 21)
- 8 -
ROP Menu (when AK-UB300G is connected)

09 FLARE
FLARE R “FLARE R” (see page 22)
FLARE G “FLARE G” (see page 22)
FLARE B “FLARE B” (see page 22)
M.FLARE “M.FLARE” (see page 22)
FLARE “FLARE” (see page 22)
10 GAMMA
GAMMA R “GAMMA R” (see page 23)
GAMMA MASTER “GAMMA MASTER” (see page 23)
GAMMA B “GAMMA B” (see page 23)
GAMMA MODE “GAMMA MODE” (see page 23)
BLACK STRETCH “BLACK STRETCH” (see page 23)
DYNAMIC LEVEL “DYNAMIC LEVEL” (see page 23)
KNEE POINT “KNEE POINT” (see page 23)
KNEE SLOPE “KNEE SLOPE” (see page 23)
GAMMA “GAMMA” (see page 23)
ABB “ABB” (see page 23)
11 BLACK GAMMA
BLACK GAMMA R “BLACK GAMMA R” (see page 24)
BLACK GAMMA MASTER “BLACK GAMMA MASTER” (see page 24)
BLACK GAMMA B “BLACK GAMMA B” (see page 24)
B.GAMMA “B.GAMMA” (see page 24)
12 KNEE
POINT (%) R “POINT (%) R” (see page 25)
POINT (%) MASTER “POINT (%) MASTER” (see page 25)
POINT (%) B “POINT (%) B” (see page 25)
SLOPE R “SLOPE R” (see page 25)
SLOPE MASTER “SLOPE MASTER” (see page 25)
SLOPE B “SLOPE B” (see page 25)
AUTO KNEE POINT % “AUTO KNEE POINT %” (see page 25)
AUTO KNEE LEVEL “AUTO KNEE LEVEL” (see page 25)
AUTO KNEE RESPONSE “AUTO KNEE RESPONSE” (see page 25)
KNEE “KNEE” (see page 25)
13 DETAIL
MASTER DETAIL “MASTER DETAIL” (see page 26)
DETAIL LV H “DETAIL LV H” (see page 26)
DETAIL LV V “DETAIL LV V” (see page 26)
PEAK FRQ “PEAK FRQ” (see page 26)
V DETAIL FRQ “V DETAIL FRQ” (see page 26)
CRISP “CRISP” (see page 26)
LEVEL DEPENDENT “LEVEL DEPENDENT” (see page 26)
DETAIL SOURCE “DETAIL SOURCE” (see page 26)
DETAIL GAIN (+) “DETAIL GAIN (+)” (see page 26)
DETAIL GAIN (-) “DETAIL GAIN (-)” (see page 26)
DETAIL CLIP+ “DETAIL CLIP+” (see page 26)
DETAIL CLIP- “DETAIL CLIP-” (see page 27)
KNEE APERTURE “KNEE APERTURE” (see page 27)
DETAIL “DETAIL” (see page 27)
LV DPN SW “LV DPN SW” (see page 27)
�
- 9 -
ROP Menu (when AK-UB300G is connected)

14 SKIN TONE DTL
MEMORY SELECT “MEMORY SELECT” (see page 28)
CURSOR “CURSOR” (see page 28)
POS H “POS H” (see page 28)
POS V “POS V” (see page 28)
SKIN GET “SKIN GET” (see page 28)
ZEBRA SWITCH “ZEBRA SWITCH” (see page 28)
ZEBRA EFFECT “ZEBRA EFFECT” (see page 28)
EFFECT MEMORY “EFFECT MEMORY” (see page 28)
SKIN TONE CRISP “SKIN TONE CRISP” (see page 28)
I CENTER “I CENTER” (see page 29)
I WIDTH “I WIDTH” (see page 29)
Q WIDTH “Q WIDTH” (see page 29)
Q PHASE “Q PHASE” (see page 29)
SKIN TONE DETAIL “SKIN TONE DETAIL” (see page 29)
15 MATRIX
LINEAR TABLE “LINEAR TABLE” (see page 30)
COLOR CORRECT “COLOR CORRECT” (see page 30)
MATRIX (R-G) P “MATRIX (R-G) P” (see page 30)
MATRIX (R-G) N “MATRIX (R-G) N” (see page 30)
MATRIX (R-B) P “MATRIX (R-B) P” (see page 30)
MATRIX (R-B) N “MATRIX (R-B) N” (see page 30)
MATRIX (G-R) P “MATRIX (G-R) P” (see page 30)
MATRIX (G-R) N “MATRIX (G-R) N” (see page 31)
MATRIX (G-B) P “MATRIX (G-B) P” (see page 31)
MATRIX (G-B) N “MATRIX (G-B) N” (see page 31)
MATRIX (B-R) P “MATRIX (B-R) P” (see page 31)
MATRIX (B-R) N “MATRIX (B-R) N” (see page 31)
MATRIX (B-G) P “MATRIX (B-G) P” (see page 31)
MATRIX (B-G) N “MATRIX (B-G) N” (see page 31)
MATRIX “MATRIX” (see page 31)
COLOR CORRECT “COLOR CORRECT” (see page 31)
LINEAR MATRIX “LINEAR MATRIX” (see page 31)
- 10 -
ROP Menu (when AK-UB300G is connected)