Panasonic AW-RP60G Use and care manual

ENGLISH AW-RP60G
W0520AM1100 -PS DVQP2338YA
Functions Added by Version Updates
Updating the version of this unit adds the following functions.
This table lists the functions added to each version. For details on each function, see the corresponding
explanation in this document.
As of October 2020
Version
Added functions
Page
1.10-00-0.02
Functions Added to Status Screen
Addition of [F1-F4 KNOB ASSIGN] to the [FUNCTION] menu
3

Addition of “I.ZOOM” to [CAM INFO] of the [FUNCTION] menu
6
Addition of “IRIS LIMIT” and
“FOCUS SPEED” to [PTZ INFO1] of the [FUNCTION] menu
7

Changing of setting values of “SW” of [CROP] of the [FUNCTION] menu
8
Addition of “CAM OSD BUTTON” and
“PRESET BUTTON” to [RP SETTING] of the [MAINTENANCE] menu
9

Addition of [PMEM NAME EDIT] to the [PMEM/TMEM] menu
13
1.10-00-0.05
Functions Added to Status Screen
Addition of “FCS_SPD” to setting values of [F1-F4 KNOB ASSIGN] of the
[FUNCTION] menu
3
2.10-00-0.01

Functions added to status screen
Changing of display of camera name and alarm information
Addition of display of camera group number
Display of the [PMEM LIST] screen by long pressing the [F5] dial
2
Changing of display of menu item being set
5

Addition of marker display for IRIS LIMIT position
7
Addition of [CAM ALARM] to the [MAINTENANCE] menu
10

Addition of “CAM AWB”, ”CAM ABB”, and
“CAM BAR” to [CAMERA] of the [SYSTEM] menu
11
Addition of “5LIMITS” to [RP IP SET] of the [SYSTEM] menu
12

Functions Linking with AK-HRP1000/AK-HRP1005
Addition of [ROP LINK] to the [SYSTEM] menu
14
Functions Linking with AV-HS6000
Addition of [SW LINK SETTING] and [SW LINK ASSIGN] to the [SYSTEM] menu
15

ENGLISH AW-RP60G
-2-
Functions Added to Status Screen
Display of camera name, alarm information, and camera group
The camera group number is now displayed in the status screen. Furthermore, the display of the camera
name and alarm information has been changed as follows.
No.
Item
Details
Supported versions
①
Camera name
Displays the name of the connected camera. When
the connection with the camera is an IP connection,
up to 10 characters of the camera name set on the
camera are displayed.
2.10-00-0.01 and later
②Camera model
number
Displays the model number or series number notified
from the connected camera.
③
Group number
Displays the camera group number.
④Alarm information Displays the alarm information for one alarm. If
multiple alarms occurred, the alarm information for the
alarm with the highest priority is displayed and the
number of remaining alarms is displayed on the
second line.
Alarm information priority order
“FAN” → “H.TEMP” → “SENSOR” → “P/T” → “LENS”
A list of the alarm information can be displayed in
[CAM ALARM] of the [MAINTENANCE] menu.
②
①
③
④

ENGLISH AW-RP60G
-3-
Assignment of functions to the [F1], [F2], [F3], and [F4] dials
(version 1.10-00-0.02 and later)
The following functions can be assigned to the [F1], [F2], [F3], and [F4] dials to operate them while the
status screen is displayed.
SHUTTER MODE
SHTTER SPEED
ND
COLOR TEMP
M.PED
GAIN
FOCUS SPEED (Version 1.10-00-0.05 and Later)
Assign the functions from [F1-F4 KNOB ASSIGN] of the [FUNCTION] menu.
[F1
-F4 KNOB ASSIGN] of the [FUNCTION] menu
Switches the functions of the
[F1], [F2], [F3], and [F4] dials
[F1], [F2], [F3], and [F4] dials
Displays the
functions
assigned to each button

ENGLISH AW-RP60G
-4-
Item
Setting value
Setting details
Supported versions
[F1] to [F4]
SHTTR_MD
SHTTR_SPD
ND
C.TEMP
GAIN
FCS_SPD*1
Selects the functions to assign to the [F1] to [F4]
dials.
SHTTR_MD: SHUTTER MODE
SHTTR_SPD: SHUTTER SPEED
ND: ND FILTER
C.TEMP: COLOR TEMP
GAIN: GAIN
FCS_SPD: FOCUS SPEED
Default value
[F1] dial: SHTTR_MD (SHUTTER MODE)
[F2] dial: SHTTR_SPD (SHTTER SPEED)
[F3] dial: ND
[F4] dial: C.TEMP (COLOR TEMP)
1.10-00-0.02 and later
*1：“FCS_SPD” only
1.10-00-0.05 and later
Display of [PMEM LIST] screen (version 2.10-00-0.01 and later)
If you long press the [F5] dial while the status screen is displayed, the [PMEM LIST] screen
([PMEM/TMEM] > [PMEM LIST]) appears.
Long press
[PMEM LIST] of the [PMEM/TMEM] Menu

ENGLISH AW-RP60G
-5-
Changing of Display of Menu Item Being Set (Version 2.10-00-0.01
and Later）
The display color of the menu item being set changes to amber. When the setting is confirmed, the color
changes back to the original color.
Display example

ENGLISH AW-RP60G
-6-
[CAM INFO] of [FUNCTION] Menu
The following item has been added to [CAM INFO] of the [FUNCTION] menu.
No.
Item
Setting value and setting details
Supported versions
①
I.ZOOM
Sets the i.Zoom function to ON/OFF. This setting can be
assigned to a USER button.
The setting is “ON” when the USER button is lit, and
“OFF” when it is not lit.
1.10-00-0.02 and later
①

ENGLISH AW-RP60G
-7-
[PTZ INFO1] of [FUNCTION] Menu
The following items have been added to [PTZ INFO1] of the [FUNCTION] menu.
No.
Item
Setting value and setting details
Supported versions
①
IRIS LIMIT
Sets the limit in the close direction in the iris operation
of the selected camera. When you set this to “ON” at
the desired iris position, operation toward the close
end can no longer be performed any farther than that
position.
When you set this to “OFF”, the setting is canceled.
1.10-00-0.02 and later
②FOCUS SPEED Sets the speed for when the [FOCUS] dial is operated
to 1 to 6 levels (default value: 3). This item can also
be assigned to the [F1], [F2], [F3], and [F4] dials in
[F1-F4 KNOB ASSIGN] of the [FUNCTION] menu.
NOTE
This is displayed as “FCS_SPD” in the [F1-F4
KNOB ASSIGN] screen and status screen.
1.10-00-0.05 and later
Marker display during [IRIS LIMIT] setting (version 2.10-00-0.01 and later)
When [IRIS LIMIT] is set to “ON”, a marker to indicate the limiter position is displayed at the IRIS position
on the status screen.
②
①

ENGLISH AW-RP60G
-8-
[CROP] of [FUNCTION] Menu
The following item has been changed in [CROP] of the [FUNCTION] menu.
No.
Item
Setting value and setting details
Supported versions
①
SW
Select from “OFF”, “CROP(1080)”, and “CROP(720)” for
the setting of [CROP SW].
When the [CROP SW] function is assigned to the [USER 1]
to [USER 4] buttons, you can select “CROP 1080” or
“CROP 720”.
NOTE
The “CROP:ON” setting value prior to the version
update will be replaced with “CROP(1080)”.
1.10-00-0.02 and later
①

ENGLISH AW-RP60G
-9-
[RP SETTING] of [MAINTENANCE] Menu
The following items have been added to [RP SETTING] of the [MAINTENANCE] menu.
No.
Item
Setting value and setting details
Supported versions
①
CAM OSD BUTTON
Switches the operation (short press or long press) of
the [CAMERA OSD ON/OFF] button on the control
panel.
SHORT: Short press
LONG: Long press
1.10-00-0.02 and later
②PRESET BUTTON Switches the operation (short press or long press) of
the [PRESET STORE] and [PRESET DELETE]
buttons on the control panel.
SHORT: Short press
LONG: Long press
①
②

ENGLISH AW-RP60G
-10-
[CAM ALARM] of [MAINTENANCE] Menu (Version 2.10-00-0.01 and
Later)
[CAM ALARM] for displaying a list of the alarms notified from the selected camera has been added to the
[MAINTENANCE] menu.
The alarm information is displayed in order of notification in [ALARM1] to [ALARM5]. If there is no
notification, "—" is displayed.

ENGLISH AW-RP60G
-11-
[CAMERA] of [SYSTEM] Menu
The following items have been added to [CAMERA] of the [SYSTEM] menu.
No.
Item
Setting value and setting details
Supported versions
①
CAM AWB
Simultaneously operates the auto white balance setting
from the unit for the cameras in the same group or all
cameras set to connect.
OFF: Does not perform simultaneous operation.
ALL AWB: Simultaneously operates all cameras set to
connect.
GRP AWB: Simultaneously operates the cameras in the
selected group.
2.10-00-0.01 and later
②CAM ABB Simultaneously operates the auto black balance setting
from the unit for the cameras in the same group or all
cameras set to connect.
OFF: Does not perform simultaneous operation.
ALL ABB: Simultaneously operates all cameras set to
connect.
GRP ABB: Simultaneously operates the cameras in the
selected group.
③
CAM BAR
Simultaneously operates ON/OFF of color output from the
unit for the cameras in the same group or all cameras set
to connect.
NON: Does not perform simultaneous operation.
ALL BAR ON/OFF: Simultaneously operates all cameras
set to connect.
GRP BAR ON/OFF: Simultaneously operates the
cameras in the selected group.
①
②
③

ENGLISH AW-RP60G
-12-
[RP IP SET] of [SYSTEM] Menu
The following item has been added to [RP IP SET] of the [SYSTEM] menu.
No.
Item
Setting value and setting details
Supported versions
①
5LIMITS
Limits the number of remote camera controllers that
can connect to one camera at the same time when
the unit is connected via an IP connection.
ENABLE: Limits the number of remote camera
controllers that can connect at the same time to up to
5 (default value). If there are already 5 connected, the
6th and subsequent remote camera controllers cannot
connect.
DISABLE: More than 5 remote camera controllers
can connect at the same time.
2.10-00-0.01 and later
NOTE
When setting this to [DISABLE], check that the camera supports connecting more than 5 remote camera
controllers at the same time.
①

ENGLISH AW-RP60G
-13-
[PMEM NAME EDIT] of [PMEM/TMEM] Menu (Version 1.10-00-0.02 and
Later)
The names and registered display colors of the preset memories displayed in [PMEM LIST] can be
edited.
Item
Details
Supported versions
PMEM1 to 100
Edits the names of the preset memories. Select and confirm
text with the [F1] dial, and delete one character with the [F2]
dial.
1.10-00-0.02 and later
VIEW COLOR Selects a status display color for registered preset memory
from seven colors (red, orange, yellow, green, blue, indigo,
and purple). When “STANDARD” is selected, the color
becomes the standard color (green).
SAVE
Saves the changes to the unit. The changes are not applied
until they are saved.
NOTES
The new preset memory names are not applied on the camera.
This operation configures the settings for the selected camera number.

ENGLISH AW-RP60G
-14-
Functions Linking with AK-HRP1000/AK-HRP1005 (Version 2.10-00-
0.01 and Later)
The camera selection on the AK-HRP1000 and AK-HRP1005 can be linked with the camera selection on
this unit.
Set the operation in [ROP LINK] of the [SYSTEM] menu.
Item
Details
Supported versions
ROP IP
Sets the IP addresses of the ROP to be connected.
2.10-00-0.01 and later
PORT
Sets the port number of the ROP to be connected.
UPLOAD
Saves the settings of [ROP IP] and [PORT] to the unit. The
settings are not applied until the information is uploaded.
CAM No. SEL
Assigns the camera number of ROP to the number of the
camera controlled by the unit.
Select the camera number of the unit in [CAM SEL], and set the
camera number of ROP to assign in [ROP CAM]. For a camera
number that will not be assigned, set [ROP CAM] to “NON”.
Default values
[ROP CAM] has “1 to 99” assigned for “CAM1 to CAM99” of
[CAM SEL].
“CAM100 to CAM200” of [CAM SEL] are set to “NON”.
ROP CAM No.
AW LINK SW
Sets linking to ON/OFF. When this is “OFF”, camera selection is
not linked.
NOTE
To actually enable this operation, you also need to set the setting on the AK-HRP1000/AK-HRP1005. The setting
can be set from [AW CONTROLLER LINK] of the ROP menu.
[ROP LINK] of [
SYSTEM] menu

ENGLISH AW-RP60G
-15-
Functions Linking with AV-HS6000 (Version 2.10-00-0.01 and Later)
This unit and the AV-HS6000 can be linked.
The settings can be set from the [SYSTEM] menu.
NOTE
To use this function, you need to install the “External_Control” plugin software on the AV-HS6000.
[SW LINK SETTING] of [SYSTEM] menu

ENGLISH AW-RP60G
-16-
Item
Details
Supported versions
SW LINK
Sets linking with the switcher to ON/OFF.
2.10-00-0.01 and later
UPDATE Saves the settings. The settings are not applied until you press
this button to upload the information.
SW IP
Sets the IP address of the switcher to be connected.
PORT
Sets the port number of the switcher to be connected.
BUS CONT
Sets selection of the bus material from the unit to the switcher
to enabled/disabled (ON/OFF).
BUS Sets the switcher bus to link with the camera selection buttons
of the unit when [BUSCONT] is “ON”.
Setting values: AUX1 to 16, ME1PVW, ME1KEY1-S/F,
ME1KEY2-S/F, ME1KEY3-S/F, ME1KEY4-S/F, ME2PVW,
ME2KEY1-S/F, ME2KEY2-S/F, ME2KEY3-S/F, ME2KEY4-S/F,
DSK1-S/K, DSK2-S/K, DSK3-S/K, DSK4-S/K
FOCUS ASSIST
Switches video between multi view and the selected camera
video by controlling the AUX bus of the switcher. This is
indicated by “ー” at unit startup.
ON: Switches to the assigned remote camera.
OFF(MV1):Switches the AUX bus video output from the
switcher to MV1.
OFF(MV2):Switches the AUX bus video output from the
switcher to MV2.
OFF(MV3):Switches the AUX bus video output from the
switcher to MV3.
OFF(MV4):Switches the AUX bus video output from the
switcher to MV4.
MV1 to MV4 Assigns the AUX buses to MV1 to MV4.
Output buses (MV1 to MV4): OFF, AUX1 to AUX16
TALLY IP
Sets the receiving of tallies from the switcher to ON/OFF.
CAM INFO Sets camera title display on the MV of the switcher. When this
is set to “ON”, the camera title is displayed.
CAM NAME
Sets whether or not to display the camera name when the
camera title is displayed on the MV of the switcher. When this
is set to “ON”, the camera name is displayed.

ENGLISH AW-RP60G
-17-
[SW LINK ASSIGN] of [SYSTEM] menu
Item
Details
Supported versions
SW INPUT
Assigns the bus number of the switcher and the camera
number in respect to the [BUS] settings of the [SW LINK
SETTING] screen.
Assign the bus number (1 to 34) of the switcher in [SW
INPUT] and the camera number in [CAM No].
2.10-00-0.01 and later
CAM No
UPDATE Saves the settings of the [SW LINK ASSIGN] menu to the
unit. The settings are not applied until the information is
uploaded.