Panasonic EUR7722KM0 User manual

Remote Control Operation Guide
This remote control is the key to your home theater experience.
RQT7999-P H0405WM0
Welcome to the world of Home Theater.
First,
turn on the receiver.
You may need to enter
a code to operate
some equipment.
Model No. EUR7722KM0
Now, you can operate
other Home Theater
components. Page 2
Page 3 Page 5
Page 4Page 2
Page 4
Page 6
P PC

DVD PLAYER TV
Switch on the television
and select input
Switch off
Switch on the player
and start play
Skip items during play
Show player
menus
Show disc menus Select and enter
menu items
Stop play
Clear the menus or return to
the previous menu
Pause play
To view frame-by-frame
Search through the disc
Specify a disc
(5-disc changer)
Start play from a selected item
Switch on the television and select input
Switch off
Adjust the volume
Change the channels
sequentially
Select the channel
directly
Watching DVDs Watching TV
Operating the TV
Operating the DVD player
Start slow-motion play
Switch on Switch on
With some Panasonic DVD players, press [FUNCTIONS] for
the “DISPLAY”function.
RQT7999
2

DVD RECORDER
The factory setting is [1].
Change the unit’s remote control code to
match the remote control code of the DVD
recorder.
For about one second press [ENTER] and
the button ([1], [2] or [3]) which is the same
number as the remote control code set by
the DVD recorder.
When using a Panasonic
DVD recorder
Check the remote control
code of the DVD recorder.
Preparations:
Switch on the television
and select input
Switch off
Switch on the recorder
and start play
Skip items during play
Show recorder
menus
Show disc menus Select and enter
menu items
Stop play
Clear the menus or return to
the previous menu
Pause play
To view frame-by-frame
Search through the disc
Start play from a selected item
Watching DVDs
Operating the DVD recorder
Operating the DVD recorder
Select drive
The factory setting is [9].
1. Press [DVD RECORDER].
2. While pressing [ENTER], press and
hold [8] for approximately
2 seconds.
After performing the following
operations, press this button again.
Start slow-motion play
Switch on
If it does not change
To return
In step 2 above, while pressing [ENTER],
press and hold [9] for approximately
2 seconds.
3

CD PLAYER
Switch off
Listening to CDs
Specify a disc
[3- or 5-disc changer]
Pause play
Stop play
Skip tracks during play
Switch on the player and start play
Start play from
a selected track
Start play from a specified disc
[MEGA CD changer] (holds more than 50 discs)
Operating the CD player
VCR
Switch on the television and select input
Switch off
Change the channels
sequentially
Select the channel
directly
Watching videotapes
Switch on the player and start play
Rewind or fast-forward
Stop play
Pause play
Operating the video deck
Switch on Switch on
Search through the disc
(Press and hold)
RQT7999
4

RECEIVER
To adjust subwoofer
output level
To mute the volume
To adjust the volume
To select
DVD ANALOG 6CH
When you select MUSIC
When you select MUSIC
Select an SFC mode
Change
the sound effect
Select the speaker channel
and adjust its output level
Select a DTS NEO:6 mode:
CINEMA or MUSIC
Change
the sound effect (Press and hold)
Change the sound effect
DTS NEO:6 MODE
SFC MODE
DOLBY PRO LOGIC x MODE
Other functions
Switch off
Listening to the radio
Select FM or AM
To cancel
For selecting
a re-master mode
Dim the display
Adjusting speaker
channel balance
Start a test signal
Stop the test signal
Select the speaker
channel and adjust
its output level
Change the preset
channels sequentially
Select the preset channel directly Select radio stations by frequency
Operating the radio
(Press and hold)
To cancel
To cancel
Select MOVIE (DOLBY EX), MUSIC or
GAME when Dolby Pro Logic x mode
or Dolby Pro Logic mode is on
5

Press and hold the button
corresponding to the equipment Enter the first digit Enter the second digit
Note that this remote control cannot operate some equipment and that it may not be able to perform some operations.
Re-enter the codes after you change the batteries.
This remote control can operate Panasonic and Technics audio-visual equipment that has remote control sensors.You may need to change the remote
control code.
It can also operate some other brands of televisions, video cassette players, and DVD players. Check the table for the brand and enter the code as follows.
The remote control outputs the on/off signal.
If the code is correct, the equipment
turns on or off.
If it doesn’t, try entering another code.
CODES
Changing the codes
TV VCR DVD
player
6