Panasonic SB-HF190P User manual

© Panasonic Corporation 2012. All rights reserved.
Unauthorized copying and distribution is a violation of
law.
PSG1202027CE
A6
Speaker System
Model No. SB-HF190P
SB-HC190P
SB-HS190P
SB-HW190P
SB-BTT190P
SB-BTT190PC
Product Color : (K)... Black Type
TABLE OF CONTENTS PAGE PAGE
1 Service Navigation----------------------------------------------- 2
1.1. System Information (SB-BTT190P-K/PCK)--------- 2
1.2. Front Speakers (SB-HF190P-K)----------------------- 2
1.3. Center Speaker (SB-HC190P-K) ---------------------- 2
1.4. Surround Speakers (SB-HS190P-K) ----------------- 2
1.5. Subwoofer (SB-HW190P-K)---------------------------- 2
2 Specifications ----------------------------------------------------- 3
3 Disassembly and Assembly Instructions ---------------- 4
3.1. Center Speaker (SB-HC190P-K) ---------------------- 5
3.2. Replacement of Speaker Connector Housing-----10
4 Wiring Connection Diagram ---------------------------------11
4.1. Center Speaker (SB-HC190P-K) ---------------------11
5 Exploded View and Replacement Parts List -----------13
5.1. Front Speakers (SB-HF190P-K) Cabinet Parts
Location ----------------------------------------------------13
5.2. Center Speaker (SB-HC190P-K) Cabinet
Parts Location---------------------------------------------14
5.3. Surround Speakers (SB-HS190P-K) Cabinet
Parts Location---------------------------------------------15
5.4. Subwoofer (SB-HW190P-K) Cabinet Parts
Location ----------------------------------------------------16
5.5. (SB-BTT190P-K/PCK) Packaging -------------------17
5.6. Replacement Parts List---------------------------------19

2
1 Service Navigation
1.1. System Information (SB-BTT190P-K/PCK)
Below is the System breakdown:
1.1.1. Model Use
SB-BTT190P-K is use for the following main models:
SC-BTT190P-K
SB-BTT190PCK is use for the following main models:
SC-BTT190PCK
SC-BTT190GNK
SC-BTT190EGK
SC-BTT190EBK
SC-BTT190EPK
1.2. Front Speakers (SB-HF190P-K)
Please refer to original service manual, SB-XH170P/PC-K (Order No. PSG1201002CE) for following.
• Disassembly and Assembly Instructions
• Wiring Connection Diagram
The illustrations for the speakers will be described in this manual.
• Exploded View
• Replacement Parts List
1.3. Center Speaker (SB-HC190P-K)
The illustrations for the speakers will be described in this manual.
• Disassembly and Assembly Instructions
• Wiring Connection Diagram
• Exploded View
• Replacement Parts List
1.4. Surround Speakers (SB-HS190P-K)
Please refer to original service manual, SB-XH170P/PC-K (Order No. PSG1201002CE) for following.
• Disassembly and Assembly Instructions
• Wiring Connection Diagram
The illustrations for the speakers will be described in this manual.
• Exploded View
• Replacement Parts List
1.5. Subwoofer (SB-HW190P-K)
The illustrations for the speakers will be described in this manual.
• Exploded View
• Replacement Parts List
Speaker System SB-BTT190P-K/PCK
Front Speakers SB-HF190P-K
Center Speaker SB-HC190P-K
Surround Speakers SB-HS190P-K
Subwoofer SB-HW190P-K

3
2 Specifications
Front Speakers (SB-HF190P-K)
Full range: 6.5 cm (2 1/2”) Cone type
Dimensions (W x H x D): 80 mm x 139 mm x 71 mm
(3 5/32” x 5 1/2” x 2 13/16”)
Mass [Weight]: Approx. 0.37 kg (0.8 lbs)
Center Speaker (SB-HC190P-K)
Full range: 6.5 cm (2 1/2”) Cone type
Super Tweeter: Piezo type
Dimensions (W x H x D): 280 mm x 84 mm x 78 mm
(11 1/32” x 3 5/16” x 3 3/32”)
Mass [Weight]: Approx. 0.53 kg (1.2 lbs)
Surround Speakers (SB-HS190P-K)
Full range: 6.5 cm (2 1/2”) Cone type
Dimensions (W x H x D): 80 mm x 139 mm x 71 mm
(3 5/32” x 5 1/2” x 2 13/16”)
Mass [Weight]: Approx. 0.37 kg (0.8 lbs)
Subwoofer (SB-HW190P-K)
Woofer: 16 cm (61/2”) Cone type
Dimensions (W x H x D): 145 mm x 289.5 mm x 258 mm
(5 23/32” x 11 13/32” x 10 5/32”)
Mass [Weight]: Approx. 3.0 kg (6.6 lbs)
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by a digital spectrum analyzer

4
3 Disassembly and Assembly Instructions
Caution Note:
• This section describes procedures for checking the operation and replacing the main components.
• For reassembly after operation checks or replacement, reverse the respective procedures.
• Special reassembly procedures are described only when required.
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with sharp
edges.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the service man-
ual.
• Select items from the following indexes when disassembly or replacement are required.
Center Speaker (SB-HC190P-K)
• Disassembly of Full Range Speaker (SP21)
• Disassembly of Front Cabinet Assembly
• Replacement of Piezo Network Assembly, Piezo Cap & Piezo Cover

5
3.1. Center Speaker (SB-HC190P-K)
3.1.1. Disassembly of Full Range Speaker
(SP21)
Step 1 : Remove 8 screws.
Step 2 : Upset the unit.
Step 3 : Slightly lift up Front Cabinet Assembly as shown.
Caution : Do not exert too much force as it may damage
the speaker wires within.
Step 4 : Lift up the Full Range Speaker (SP21) slightly.
Caution : Do not exert too much force as it may damage
the speaker wires within.
Step 5 : Detach the Black (-) and Red (+) wires.
Step 6 : Remove the Full Range Speaker (SP21).

6
3.1.2. Disassembly of Front Cabinet
Assembly
• Refer to “Disassembly of Full Range Speaker (SP21)”
Step 1 : Detach the Black (-) and Red (+) wires.
Step 2 : Remove Rear Cabinet Assembly.
Step 3 : Remove Hot-melt Glue.
Step 4 : Remove Piezo Network Assembly.
Step 5 : Remove Front Cabinet Assembly.

7
3.1.3. Replacement of Piezo Network
Assembly, Piezo Cap & Piezo Cover
• Refer to “Disassembly of Full Range Speaker (SP21)”
• Refer to “Disassembly of Front Cabinet Assembly”
3.1.3.1. Disassembly of Piezo Network
Assembly, Piezo Cap & Piezo
Cover
Step 1 : Use a Tweezers to remove the Piezo Cap from Piezo
Network Assembly.
Step 2 : Remove Piezo Cap.
Step 3 : Remove Piezo Network Assembly from Piezo Cover.

8
3.1.3.2. Assembly of Piezo Network
Assembly, Piezo Cap & Piezo
Cover
Step 1 : Place Piezo Cap as shown.
Step 2 : Apply Glue to the Piezo Cap.
Step 3 : Place Piezo Network Assembly to the Piezo Cover as
shown.
Step 4 : Place Piezo Network Assembly to the Piezo Cap.

9
Step 5 : Apply Hot-melt Glue to the Piezo Network Assembly.

10
3.2. Replacement of Speaker Connector Housing
3.2.1. Disassembly
Step 1: Use a paper clip push the Speaker Wire head until it
hide inside the Speaker Connector Housing.
Step 2: Pull out the (+) and (-) speaker wires.
3.2.2. Assembly
Step 1: Slightly push up the speaker wire head approximately
45°as shown.
Step 2: Insert the (+) speaker wire into the (+) hole of the
Speaker Connector Housing.
Note: Push in the speaker wire until hear the “click” sound.
Step 3: Insert the (-) speaker wire into the (-) hole of the
speaker connector housing.
Note: Push in the speaker wire until hear the “click” sound.
Step 4: Pull both speaker wires gently to ensure they lock-in
firmly.
Note: Repeat step1 to 3 if the speaker wires come out.