Panasonic KX-TES824ML User manual

Panasonic KX-TES824ML –System Setting Quick Reference Guide
Enable or Disable Ringing Extension for Day Mode - PGM NO: 408
www.fjt.com.my
1. Press [PROGRAM] , LCD display “ PITS – PGM NO? -> “
2. Press 米#, LCD display “ Password “
3. Key in password 1 2 3 4 , LCD display “ SYS – PGM NO? “
4. Enter 4 0 8 for Day mode, LCD display “ Day In CO “
5. Press [SP-PHONE], LCD display “ CO NO? -> “
6. Press [SP-PHONE], LCD display “ CO 1: #01: Enable “
7. Press [AUTO ANS] to change to Disable. Press [AUTO ANS] again to change to Enable
8. Press [AUTO DIAL] to save setting
9. Press [FWD/DND] to move to next Jack NO. Press [CONF] to back to previous Jack NO.
10. Repeat step 7 & 8 follow by step 9 for next Jack NO.
11. Press [SP-PHONE] for next CO NO. or press [HOLD] to end
12. Press [PROGRAM] to Exit
Enable or Disable Ringing Extension for Night Mode - PGM NO: 409
1. Press [PROGRAM] , LCD display “ PITS – PGM NO? -> “
2. Press 米#, LCD display “ Password “
3. Key in password 1 2 3 4 , LCD display “ SYS – PGM NO? “
4. Enter 4 0 9 for Night mode, LCD display “ Night In CO “
5. Press [SP-PHONE], LCD display “ CO NO? -> “
6. Press [SP-PHONE], LCD display “ CO 1: #01: Enable ”
7. Press [AUTO ANS] to change to Disable. Press [AUTO ANS] again to change to Enable
8. Press [AUTO DIAL] to save setting
9. Press [FWD/DND] to move to next Jack NO. Press [CONF] to back to previous Jack NO.
10. Repeat step 7 & 8 follow by step 9 for next Jack NO.
11. Press [SP-PHONE] for next CO NO. or press [HOLD] to end
12. Press [PROGRAM] to Exit

Panasonic KX-TES824ML –System Setting Quick Reference Guide
Delay Ringing Extension for Day Mode - PGM NO: 411
www.fjt.com.my
1. Press [PROGRAM] , LCD display “ PITS – PGM NO? -> “
2. Press 米#, LCD display “ Password “
3. Key in password 1 2 3 4 , LCD display “ SYS – PGM NO? “
4. Enter 4 1 1for Day mode, LCD display “ Day Delay CO “
5. Press [SP-PHONE], LCD display “ CO NO? -> “
6. Press [SP-PHONE], LCD display “ CO 1: #01: Immdtly “
7. Press [AUTO ANS] to change to delay ring 5s, 10s, 15s or back to Immediately ring.
8. Press [AUTO DIAL] to save setting
9. Press [FWD/DND] to move to next Jack NO. Press [CONF] to back to previous Jack NO.
10. Repeat step 7 & 8 follow by step 9 for next Jack NO.
11. Press [SP-PHONE] for next CO NO. or press [HOLD] to end
12. Press [PROGRAM] to Exit
Delay Ringing Extension for Day Mode - PGM NO: 412
1. Press [PROGRAM] , LCD display “ PITS – PGM NO? -> “
2. Press 米#, LCD display “ Password “
3. Key in password 1 2 3 4 , LCD display “ SYS – PGM NO? “
4. Enter 4 1 2for Night mode, LCD display “ Night Delay CO “
5. Press [SP-PHONE], LCD display “ CO NO? -> “
6. Press [SP-PHONE], LCD display “ CO 1: #01: Immdtly “
7. Press [AUTO ANS] to change to delay ring 5s, 10s, 15s or back to Immediate ring.
8. Press [AUTO DIAL] to save setting
9. Press [FWD/DND] to move to next Jack NO. Press [CONF] to back to previous Jack NO.
10. Repeat step 7 & 8 follow by step 9 for next Jack NO.
11. Press [SP-PHONE] for next CO NO. or press [HOLD] to end
12. Press [PROGRAM] to Exit

Panasonic KX-TES824ML –System Setting Quick Reference Guide
Enable or Disable CO Trunks for Day Mode - PGM NO: 405
www.fjt.com.my
1. Press [PROGRAM] , LCD display “ PITS – PGM NO? -> “
2. Press 米#, LCD display “ Password “
3. Key in password 1 2 3 4 , LCD display “ SYS – PGM NO? “
4. Enter 4 0 5 for Day mode, LCD display “ Day Out CO “
5. Press [SP-PHONE], LCD display “ CO NO? -> “
6. Press [SP-PHONE], LCD display “ CO 1: #01: Enable “
7. Press [AUTO ANS] to change to Disable. Press [AUTO ANS] again to change to Enable
8. Press [AUTO DIAL] to save setting
9. Press [FWD/DND] to move to next Jack NO. Press [CONF] to back to previous Jack NO.
10. Repeat step 7 & 8 follow by step 9 for next Jack NO.
11. Press [SP-PHONE] for next CO NO. or press [HOLD] to end
12. Press [PROGRAM] to Exit
Enable or Disable CO Trunks for Night Mode - PGM NO: 406
1. Press [PROGRAM] , LCD display “ PITS – PGM NO? -> “
2. Press 米#, LCD display “ Password “
3. Key in password 1 2 3 4 , LCD display “ SYS – PGM NO? “
4. Enter 4 0 6 for Night mode, LCD display “ Night Out CO “
5. Press [SP-PHONE], LCD display “ CO NO? -> “
6. Press [SP-PHONE], LCD display “CO 1: #01: Enable ”
7. Press [AUTO ANS] to change to Disable. Press [AUTO ANS] again to change to Enable
8. Press [AUTO DIAL] to save setting
9. Press [FWD/DND] to move to next Jack NO. Press [CONF] to back to previous Jack NO.
10. Repeat step 7 & 8 follow by step 9 for next Jack NO.
11. Press [SP-PHONE] for next CO NO. or press [HOLD] to end
12. Press [PROGRAM] to Exit

Panasonic KX-TES824ML –System Setting Quick Reference Guide
Change Day COS (Class Of Service) - PGM NO: 601
www.fjt.com.my
1. Press [PROGRAM] , LCD display “ PITS – PGM NO? -> “
2. Press 米#, LCD display “ Password “
3. Key in password 1 2 3 4 , LCD display “ SYS – PGM NO? “
4. Enter 6 0 1 for Day COS, LCD display “ Day Toll Restr “
5. Press [SP-PHONE], LCD display “ Jack NO? “
6. Key in Jack No. (i.e. 01 for Extension 101, 02 for Extension 102 …. ]
7. LCD display “ #01: COS – 1 “
8. Press [AUTO ANS] to change COS (1 ~ 5)
(1 for IDD, 2 for STD, 3 for Local + HP, 4 for Local only, 5 for Intercom Only)
9. Press [AUTO DIAL] to save setting
10. Press [SP-PHONE] for next Jack NO. or press [HOLD] to end
11. Press [PROGRAM] to Exit
Change Night COS (Class Of Service) - PGM NO: 602
1. Press [PROGRAM] , LCD display “ PITS – PGM NO? -> “
2. Press 米#, LCD display “ Password “
3. Key in password 1 2 3 4 , LCD display “ SYS – PGM NO? “
4. Enter 6 0 2 for Night COS, LCD display “ Night Toll Restr “
5. Press [SP-PHONE], LCD display “ Jack NO? “
6. Key in Jack No. (i.e. 01 for Extension 101, 02 for Extension 102 …. ]
7. LCD display “ #01: COS – 1 “
8. Press [AUTO ANS] to change COS (1 ~ 5)
(1 for IDD, 2 for STD, 3 for Local + HP, 4 for Local only, 5 for Intercom Only)
9. Press [AUTO DIAL] to save setting
10. Press [SP-PHONE] for next Jack NO. or press [HOLD] to end
11. Press [PROGRAM] to Exit