Panasonic BB-GT1500C User manual

PQQW15680YA DM0507SY1067
Routine care
LTo clean the product, use a dry soft cloth. The outer surface of the product can
be scratched by wiping or rubbing with a hard cloth.
Setting up
Base unit
Handset CHARGE 7 HOURS
Confirm the
charge indicator
is on.
Model shown is BB-GT1500.
“Click”
TEL LAN
Noise filter
To single-line
telephone jack
(RJ11C)
AC adaptor
Telephone line cord
Ethernet cable
Router
Cable or
DSL modem
Internet
(120 V AC, 60 Hz)
A
B
C
Use only the included Panasonic AC adaptor PQLV203.
Hook
Press
plug firmly.
“Click”
“Click”
ABE
D
C
Model No. BB-GT1500C
BB-GT1502C
BB-GT1540C
Quick Guide
BB-GT15xxC_QG(e).fm Page 1 Thursday, June 14, 2007 3:34 PM

– 2 –
Setting up
Note:
LIf “Please read joip Terms of Use. Agree?” is not displayed in step 2,
press {IP}.
LWhen the STATUS indicator on the base unit does not light in green even if you
wait for a few minutes, see “STATUS indicator” (page 6).
Viewing the Atext messages
1{MENU}i{#}{3}{6}{0}
2{V}/{^}: Select the desired item. i{OK}
3{OFF}
For product assistance, visit www.globarange.com
For Aassistance, visit www.joip.com
joip
Model shown is BB-GT1500.
Amber Green
[
Please read joip
Terms of Use.
Agree?
YES NO
joip:#1001060429
To use the AIP line, read the Terms of Use for the Aservices on the
included leaflet or at www.joip.com
1
Wait for a Atext message for the Awebsite password (www.joip.com).
To view the message, see below.
5
Press {YES}.
2Wait until the STATUS
indicator turns green.
3Confirm your A
number.
4
Charger*1
(120 V AC, 60 Hz)
*1 BB-GT1502
Use only the included Panasonic AC adaptor
PQLV208.
Confirm the
charge indicator
is on.
BB-GT15xxC_QG(e).fm Page 2 Thursday, June 14, 2007 3:34 PM

– 3 –
Operating tips
{}: shows button names.
Using the joystick
The handset joystick can be used to navigate
through menus and to select items shown on the
display, by pushing it up {^}, down {V}, left {<}, or
right {>}.
Adjusting audio volume
Push the joystick up {^} or down {V} repeatedly
while talking.
Handset soft keys
The handset features 2 soft keys and a joystick. By
pressing a soft key, or by pressing the center of the
joystick, you can select the feature shown directly
above it on the display.
{SELECT}, {SAVE}, {OK}, and additional other
functions are assigned to soft keys. Pay attention to
soft keys to find functions you need during handset
operation.
Middle soft key
The joystick can be used to select the center soft
key icon, by pressing down on the center of the
joystick.
Change language (Handset) (default: English)
Display language
1{OFF}i{MENU}i{#}{1}{1}{0}
2{V}/{^}: Select the desired setting. iPress down the center of the joystick to
save. i{OFF}
Voice guidance language (BB-GT1540)
{MENU}i{#}{1}{1}{2}i{V}/{^}: Select the desired setting. i{SAVE}i
{OFF}
For product assistance, visit www.globarange.com
For Aassistance, visit www.joip.com
BB-GT15xxC_QG(e).fm Page 3 Thursday, June 14, 2007 3:34 PM

– 4 –
Date and time (Handset)
1{MENU}i{#}{1}{0}{1}
2Enter the current month, date, and year by selecting 2 digits for each.
3Enter the current hour and minute (12-hour clock format) by selecting 2 digits for
each.
4{AM/PM}: Select “AM” or “PM”. i{SAVE}i{OFF}
Basic operation (Handset)
Making calls 1Dial the phone number.
2To make a landline call, press {TEL}.
To make a Ainternet call, press {IP}.
Note:
LTo call a Panasonic GLOBARANGE phone, dial the
Anumber consisting of the pound key (#)
followed by 10 digits.
Answering calls To answer the landline call, press {TALK}, {TEL}or
{s}.
To answer the Ainternet call, press {TALK}, {IP}
or {s}.
Adjusting the receiver/
speaker volume
Push the joystick up {^} or down {V} while talking.
Viewing the caller list and
calling back
{CID}i{V}/{^}: Select the desired item. i
{TEL}/{IP}
Ringer volume 1{MENU}i{#}{1}{6}{0}{1}(IP line)/
{#}{1}{6}{0}{2}(landline)
2{^}/{V}: Select the desired volume. i{SAVE}
BB-GT1540 Basic operation (Base unit)
Making calls 1To make a landline call, press {TEL}.
To make a Ainternet call, press {IP}.
2Dial the phone number, and then speak into the
MIC.
Note:
LTo call a Panasonic GLOBARANGE phone, dial the
Anumber consisting of the pound key (#)
followed by 10 digits.
Answering calls To answer the landline call, press {TEL}or {s}.
To answer the Ainternet call, press {IP}or {s}.
BB-GT15xxC_QG(e).fm Page 4 Thursday, June 14, 2007 3:34 PM

– 5 –
Adjusting the speaker
volume
Press {^} or {V} repeatedly while talking.
Ringer volume 1Press {IP/TEL}repeatedly until the display shows
the desired line (nor m).
2Press {^} or {V} repeatedly to select the desired
volume.
LTo turn the ringer off, press and hold {V} until the
unit beeps.
BB-GT1540 Answering system (Base unit)
Auto answer on 1Press {IP/TEL}repeatedly until the display
shows the desired line(s) (nand/or m).
2Press {ANSWER ON}.
Auto answer off Press {ANSWER ON}.
Recording your greeting
message (max. 2 minutes)
1Press {IP/TEL}repeatedly until the display
shows the desired line(s) (nand/or m).
2{GREETING REC}
3Within 10 seconds, press {GREETING REC}
again.
4Speak clearly about 20 cm (8 inches) away from
the MIC.
5To stop recording, press {STOP}.
Listening to new messages When {6}flashes on the center of navigator key,
press {6}.
Erasing a message Press {ERASE}during playback.
Using the answering system
remotely
1Dial your phone number from a touch tone
phone.
2After the greeting message starts, enter your
remote code. (Default remote code is “111”.)
LThe unit plays back new messages.
LAfter playing back new messages, the voice
guidance starts.
3Follow the voice guidance as necessary.
For product assistance, visit www.globarange.com
For Aassistance, visit www.joip.com
BB-GT1540 Basic operation (Base unit)
BB-GT15xxC_QG(e).fm Page 5 Thursday, June 14, 2007 3:34 PM

– 6 –
For further information, refer to the STATUS indicator section in the Operating
Instructions.
Quick troubleshooting
STATUS indicator
Status Cause/solution
Colour Light pattern
Green On LReady to make/receive Ainternet calls.
Flashing LDownloading data, please wait.
Red On LOn for about 3 seconds during initial startup. (Normal)
Flashing LThe base unit is registering a handset. Please wait.
Flashing
rapidly
LThe base unit is paging handsets. (BB-GT1500/BB-
GT1502)
Amber On LThe base unit’s IP address may conflict with the IP
addresses of other devices on your local network if you
have set the static IP address. We recommend using
the automatic setup (default):
1. {MENU}i{#}{5}{0}{0}
2. {V}{^}: “On” i{SAVE}i{OFF}
Flashing LThe base unit is registering with the Aservice.
Please wait.
LIf the STATUS indicator continues flashing:
– If you have set the static address, we recommend
using the automatic setup (default):
1. {MENU}i{#}{5}{0}{0}
2. {V}{^}: “On” i{SAVE}i{OFF}
– Many installation issues can be resolved by resetting
all the equipment. First, shut down your modem,
router, base unit, and computer. Then turn the
devices back on one at a time in this order: modem,
router, base unit, computer.
– If you cannot access Internet Web pages using your
computer, check to see if your Internet service
provider is having connection issues in your area.
– For more troubleshooting help, visit www.joip.com or
contact the Aservice provider.
OFF —LAinternet calls are not available. Check the
following:
– The base unit’s AC adaptor is connected.
– Set up for Ause (page 2).
– The Ethernet cable is connected.
– Your network devices (hub, router, etc.) are turned
on. Check the LEDs for the link status of the devices.
BB-GT15xxC_QG(e).fm Page 6 Thursday, June 14, 2007 3:34 PM

– 7 –
For other questions, please refer to the Operating Instructions.
Frequently asked questions
Question Cause/solution
The unit does not work. LMake sure the battery is installed correctly and
fully charged.
LUnplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
LThe handset has not been registered to the base
unit. Register the handset as explained later in
this guide.
I cannot hear a dial tone for
the IP line.
LConfirm the Ethernet cable is properly connected.
LYou have not agreed to the Terms of Use for the
Aservices. To use the AIP line, you need to
agree to it using the handset.
LIf you cannot make or receive internet calls or if
you are experiencing any other issues with your
VoIP telephone service provided by deltathree,
Inc., visit www.joip.com
I cannot hear a dial tone for
the landline.
LConfirm the telephone line cord is properly
connected.
LDisconnect the unit from the telephone line and
connect a known working telephone. If the
working telephone operates properly, contact
Panasonic service personnel to have the unit
repaired. If the working telephone does not
operate properly, contact your landline service
provider.
How can I increase handset
volume level?
LPush the joystick up repeatedly while talking.
The VM indicator on the
base unit flashes.
Example: BB-GT1540
LYou have new voice mail messages received by
your landline service provider and/or A. For
further information, refer to the Voice Mail section
in the Operating Instructions.
BB-GT1540: The message
indicator on the base unit
flashes.
LYou have new messages received from the
landline and/or AIP line by the unit’s
answering system. For further information, refer
to the answering system section in the Operating
Instructions.
For product assistance, visit www.globarange.com
For Aassistance, visit www.joip.com
VM
BB-GT15xxC_QG(e).fm Page 7 Thursday, June 14, 2007 3:34 PM

– 8 –
Quick troubleshooting
Place the handset on the base unit, then
check if the charge indicator is on.
LModel shown is BB-GT1500.
The charge indicator is OFF.
The charge indicator
is ON.
Unplug the AC adaptor of the base unit and remove the
battery from the handset, then plug in the AC adaptor and
insert the battery into the handset again. Try re-registration
as explained later in this guide.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
Re-registration failed.
Re-registration failed.
Your telephone may need service.
“No link to base. Move closer to base, try again.”
Handset shows:
Unplug and then plug AC
adaptor properly to both the
base unit and AC outlet.
BB-GT15xxC_QG(e).fm Page 8 Thursday, June 14, 2007 3:34 PM

– 9 –
Registering a handset to base unit
The included handset and base unit are preregistered. If for some reason the
handset is not registered to the base unit, register the handset.
For product assistance, visit www.globarange.com
For Aassistance, visit www.joip.com
Handset
Press {MENU}, then press {#}{1}{3}{0}.
Handset
Press {OK
L }.
Base unit
BB-GT1500/BB-GT1502
Press and hold {HANDSET LOCATOR}
until the STATUS indicator flashes in red.
LComplete next step within 90 seconds.
BB-GT1540
Press and hold {LOCATOR/INTERCOM}
until the registration tone sounds and the
STATUS indicator flashes in red.
LComplete next step within 90 seconds.
{LOCATOR/INTERCOM}
{HANDSET LOCATOR}
{MENU}
Press LOCATOR
on base for 4sec
Then press
OK
FRANÇ.
{OK L }
BB-GT15xxC_QG(e).fm Page 9 Thursday, June 14, 2007 3:34 PM

IMPORTANT!
If your product is not working
properly. . .
For your phone’s functions or features, please contact
Panasonic.
FOR PRODUCT OPERATION ASSISTANCE, please
contact:
Our Customer Care Centre:
Telephone #: [phone]
1-800 #: 1-800-561-5505
Fax #: [phone]
Email link: “Contact Us” on www.panasonic.ca
FOR PRODUCT REPAIRS, please locate your nearest
Authorized Servicentre at www.panasonic.ca :
Link : “Servicentres™ locator” under “Customer support”
Acustomer support
Ais the VoIP service provided by deltathree, Inc. for this
phone. If you cannot make or receive internet calls or if you
are experiencing any other issues with your VoIP telephone
services, please contact Acustomer support:
LVisit www.joip.com or send an email to
[e-mail]
LCall *JOIP (*5647) from your GLOBARANGE phone
using the IP line.
LCall 1-888-654-JOIP (1-888-654-5647) using the landline.
BB-GT15xxC_QG(e).fm Page 10 Thursday, June 14, 2007 3:34 PM