Panasonic T-Mobile KX-HDV130 User manual

KX-HDV230
Operating Instructions
SIP Phone
Model No. KX-HDV130
KX-HDV230
Thank you for purchasing this Panasonic product.
Please read this manual carefully before using this product and save this manual for future use.
Note
•In this manual, the suffix of each model number is omitted unless necessary.
•The illustrations such as some keys may differ from the appearance of the actual product.
•Certain products and features described in this document may not be available in your country or area.
Contact your phone system dealer/service provider.
•The contents and design of the software are subject to change without notice.
Document Version: 2017-08

Introduction
This manual describes information about the installation and operation of KX-HDV130 / KX-HDV230.
Related Documentation
•Quick Start Guide
Describes basic information about the installation and safety precautions to prevent personal injury and/or
damage to property.
•Administrator Guide
Describes detailed information about the configuration and management of this unit.
Manuals and supporting information are provided on the Panasonic Web site at:
https://panasonic.net/cns/pcc/support/sipphone/
For Future Reference
Record the information in the space below for future reference.
Note
•The serial number and MAC address of this product may be found on the label affixed to the bottom
of the unit. You should note the serial number and MAC address of this unit in the space provided and
retain this manual as a permanent record of your purchase to aid in identification in the event of theft.
MODEL NO. KX-HDV130 / KX-HDV230
SERIAL NO.
MAC ADDRESS
DATE OF PURCHASE
NAME OF DEALER
DEALER’S ADDRESS
DEALER’S TEL. NO.
Introduction
2 Operating Instructions Document Version: 2017-08

Table of Contents
1 Important Information ............................................................................ 5
1.1 Data Security ................................................................................................................... 6
1.2 Disposal of Old Equipment and Batteries ..................................................................... 6
1.3 Regional Information ...................................................................................................... 7
1.3.1 For Users in European Countries ................................................................................... 7
1.3.2 For Users in the United Kingdom ................................................................................... 7
1.3.3 For Users in Australia ..................................................................................................... 7
1.3.4 For Users in Australia and the United Kingdom ............................................................. 7
1.3.5 For Users in New Zealand .............................................................................................. 7
1.3.6 For Users in the United States ....................................................................................... 8
1.3.7 For Users in Canada ...................................................................................................... 9
1.4 For Best Performance ................................................................................................... 11
2 Before Operating the Telephones ....................................................... 13
2.1 Accessory Information ................................................................................................. 14
2.2 Installation and Setup ................................................................................................... 16
2.2.1 Attaching the Stand ...................................................................................................... 16
2.2.2 Adjusting the Stand Position ......................................................................................... 17
2.2.3 Removing the Stand ..................................................................................................... 17
2.2.4 Attaching the Optional KX-HDV20 to the Unit (KX-HDV230 only) ................................ 18
2.2.5 Connections (including optional KX-HDV20) ................................................................ 19
2.2.6 Wall Mounting ............................................................................................................... 22
2.2.7 Hooking the Handset .................................................................................................... 26
2.3 Location of Controls ..................................................................................................... 27
2.4 The Display and Icons .................................................................................................. 36
2.4.1 Main Display ................................................................................................................. 36
2.4.2 Sub Display (Self-labeling LCD) (KX-HDV230 only) .................................................... 38
2.5 Main Menu ...................................................................................................................... 40
2.6 Keys ................................................................................................................................ 41
2.6.1 Soft Keys ...................................................................................................................... 41
2.7 Phonebook ..................................................................................................................... 43
2.8 Basic Operations ........................................................................................................... 44
2.8.1 Going off- and on-hook ................................................................................................. 44
2.8.2 Adjusting the Volume .................................................................................................... 45
2.8.3 Entering Characters ...................................................................................................... 45
2.8.4 Using the Incoming/Outgoing Call Log ......................................................................... 46
3 Feature Operations ............................................................................... 47
3.1 Making Calls .................................................................................................................. 48
3.1.1 Basic Calling ................................................................................................................. 48
3.1.2 Easy Dialing .................................................................................................................. 48
3.1.3 Making a Multicast Voice Paging call ........................................................................... 50
3.2 Receiving Calls .............................................................................................................. 51
3.2.1 Answering Calls ............................................................................................................ 51
3.3 Using Hands-free Mode ................................................................................................ 53
3.4 During a Conversation .................................................................................................. 54
3.4.1 Transferring a Call (Call Transfer) ................................................................................ 54
3.4.2 Holding a Call ............................................................................................................... 54
3.4.3 Holding in a System Parking Zone (Call Park) ............................................................. 55
3.4.4 Talking to Two Parties Alternately (Call Splitting) ......................................................... 56
3.4.5 Making a Three-party Conference ................................................................................ 56
3.4.6 Muting the Microphone or the Handset ........................................................................ 57
Table of Contents
Document Version: 2017-08 Operating Instructions 3

3.4.7 Using Call Waiting ........................................................................................................ 57
3.4.8 Using Off-hook Monitor ................................................................................................. 58
3.4.9 Using Training Mode (KX-HDV230 only) ...................................................................... 58
3.5 Before Leaving Your Desk ............................................................................................ 59
3.5.1 Setting Call Forwarding and Do Not Disturb ................................................................. 59
3.6 Using the Phonebook ................................................................................................... 60
3.6.1 Storing an Item in the Local Phonebook ....................................................................... 60
3.6.2 Editing a stored item in the Local Phonebook .............................................................. 61
3.6.3 Deleting a Stored Item in the Local Phonebook ........................................................... 62
3.6.4 Searching for an Item in the Local Phonebook ............................................................. 63
3.6.5 Locking/Unlocking the Local Phonebook ...................................................................... 64
3.6.6 Searching for an Item in the Remote Phonebook ......................................................... 65
3.7 Checking the Line Status ............................................................................................. 66
3.8 Listening to Voice Mail Messages ............................................................................... 68
4 Customizing the Telephone ................................................................. 69
4.1 Setting the LCD Display ................................................................................................ 70
4.2 Setting the Password .................................................................................................... 71
4.3 Editing Soft Keys ........................................................................................................... 72
4.4 Using Hot Keys .............................................................................................................. 73
4.5 Function Keys (Program Keys and DSS Keys*1) ......................................................... 75
4.5.1 Changing the Function Keys ........................................................................................ 75
4.5.2 The Types of Function Keys ......................................................................................... 75
4.6 Using the Anonymous Call Features ........................................................................... 79
4.7 Barring Incoming Calls (Caller ID*1 service users only) ............................................. 80
4.8 Setting ECO Mode ......................................................................................................... 82
4.9 Changing the Basic Setting .......................................................................................... 83
4.9.1 Basic Settings Menu Layout ......................................................................................... 83
4.10 Changing the System Settings .................................................................................... 89
4.10.1 System Settings Menu Layout ...................................................................................... 89
4.11 Web User Interface Programming ............................................................................... 94
4.12 Updating the Software .................................................................................................. 94
5 Appendix ............................................................................................... 95
5.1 Character Mode Table ................................................................................................... 96
5.2 Character Table for Administrator Password ........................................................... 101
5.3 Specifications .............................................................................................................. 102
5.4 Troubleshooting .......................................................................................................... 105
5.5 Error Messages ........................................................................................................... 108
5.6 Revision History .......................................................................................................... 109
5.7 Wall mounting template .............................................................................................. 110
5.7.1 KX-HDV130 ................................................................................................................ 110
5.7.2 KX-HDV230, optionally with 1 attached KX-HDV20 ................................................... 111
5.7.3 For mounting 2 or more KX-HDV20 units (KX-HDV230 only) .................................... 112
Table of Contents
4 Operating Instructions Document Version: 2017-08

Section 1
Important Information
This section provides important information intended to
prevent personal injury and property damage.
Document Version: 2017-08 Operating Instructions 5

1.1 Data Security
We cannot be responsible for damages resulting from the misuse of this product.
•Keep a copy of all important data (such as the phonebook list) in case the machine malfunctions and data
cannot be recovered.
•This product can store your private/confidential information. To protect your privacy/confidentiality, we
recommend that you erase the information such as the phonebook or call log from the memory before
you dispose of, transfer or return the product, or have the product repaired.
•To avoid unauthorized access to this product:
–Keep the password secret.
–Change the default password.
–Set a password that is random and cannot be easily guessed.
–Change the password regularly.
•Security settings, such as passwords, cannot be undone at Panasonic service centers. Take measures to
prevent passwords from being lost or forgotten.
•If a password is forgotten, initialize the unit and configure the settings again. For details, consult your
administrator or dealer.
•It is recommended that you lock the phonebook to prevent stored information from being leaked.
1.2 Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems
These symbols on the products, packaging, and/or accompanying documents mean that
used electrical and electronic products and batteries must not be mixed with general
household waste.
For proper treatment, recovery and recycling of old products and batteries, please take them
to applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any
potential negative effects on human health and the environment.
For more information about collection and recycling, please contact your local municipality.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
Note for the battery symbol (bottom symbol)
This symbol might be used in combination with a chemical symbol. In this case it complies
with the requirement set by the Directive for the chemical involved.
1.1 Data Security
6 Operating Instructions Document Version: 2017-08

1.3 Regional Information
1.3.1 For Users in European Countries
The following declaration is applicable to KX-HDV130NE / KX-HDV130X / KX-HDV230NE /
KX-HDV230X only.
For information of Compliance with EU relevant Regulatory Directives,
Contact to Authorized Representative:
Panasonic Testing Center
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Ecodesign information
Ecodesign information under EU Regulation (EC) No.1275/2008 amended by (EU) Regulation No.801/2013.
=======================================
Please visit here: http://www.ptc.panasonic.eu
click [Downloads]
Energy related products information (Public)
=======================================
Power consumption in networked standby and guidance are mentioned in the web site above.
1.3.2 For Users in the United Kingdom
•This unit is designed to be installed under controlled conditions of ambient temperature and a relative
humidity.
•Avoid installing the unit in damp or humid environments, such as bathrooms or swimming pools.
•999 and 112 can be dialed on the product after accessing the outside line for the purpose of making
outgoing calls to the BT emergency (999) and (112) services. The method for accessing an outside line
differs depending on the SIP server. For details, confirm the features of the SIP server.
1.3.3 For Users in Australia
WARNING
•Please ensure that a separate telephone, not dependent on local power, is available for emergency
use.
•This equipment will be inoperable when mains power fails.
•No “000” or other calls can be made from this device during a mains power failure.
1.3.4 For Users in Australia and the United Kingdom
•This unit is capable of being used in conjunction with hearing aids fitted with
inductive coil pick-ups. The handset should be held as for normal
conversation. For operation, the hearing aid should be set to its "T" position or
as directed in the operating instructions for the hearing aid.
•This unit is designed to aid the visually handicapped to locate dial keys and
buttons.
1.3.5 For Users in New Zealand
This equipment shall not be set to make automatic calls to the Telecom ‘111’ Emergency Service.
1.3 Regional Information
Document Version: 2017-08 Operating Instructions 7

PTC General Warning
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that
the item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any
item will work correctly in all respects with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of Telecom’s network services.
The Use of IP Networks through the PSTN
Internet Protocol (IP) by its nature introduces delay into speech signals as each data packet is formulated
and addressed. Telecom Access Standards recommends that suppliers, designers and installers using this
technology for calls to or from the PSTN refer to ITU E Model requirements in the design of their networks.
The overall aim is to minimize delay, distortion and other transmission impairments, particularly for those
calls involving cellular and international networks, which already suffer extensive delay.
Echo cancellation
Echo cancelers are not normally required in the Telecom PSTN because geographic delays are acceptable
where CPE return loss is maintained within Telepermit limits. However, those private networks making use
of Voice over IP technology are required to provide echo cancellation for all voice calls. The combined effect
of audio/VoIP conversion delay and IP routing delay can cause the echo cancellation time of ≥64 ms to be
required.
Important Notice
•Under power failure conditions this appliance may not operate. Please ensure that a separate telephone,
not dependent on local power, is available for emergency use.
•No “111” or other calls can be made from this device during a mains power failure.
1.3.6 For Users in the United States
Note
•This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
–Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.
1.3.6 For Users in the United States
8 Operating Instructions Document Version: 2017-08

2. Perform such activities during off-peak hours, such as early morning or late evening.
CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this product.
Hearing Aid Compatibility
This telephone provides magnetic coupling for hearing aids as defined by the FCC in 47 CFR Section
68.316. Use only handsets or other acoustic devices with this equipment that are compliant with the hearing
aid compatibility requirements of FCC Part 68.
When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not
adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset
accessory or the speakerphone option (if applicable) when using this phone. Consult your audiologist or
Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF
energy commonly emitted by digital devices.
Compliance with TIA-1083 standard:
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephone handsets identified with this logo have reduced noise and interference
when used with T-Coil equipped hearing aids and cochlear implants.
Responsible Party
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, New Jersey 07102-5490
Technical Support
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, New Jersey 07102-5490
Telephone: [phone] Option 1
1.3.7 For Users in Canada
Industry Canada Notices and Other Information
This product meets the applicable Innovation, Science and Economic Development Canada technical
specifications.
Notice
•This Class B digital apparatus complies with Canadian ICES-003.
CAUTION
•Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this product.
1.3.7 For Users in Canada
Document Version: 2017-08 Operating Instructions 9

Compliance with TIA-1083 standard:
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephone handsets identified with this logo have reduced noise and
interference when used with T-Coil equipped hearing aids and cochlear
implants.
1.3.7 For Users in Canada
10 Operating Instructions Document Version: 2017-08

1.4 For Best Performance
Environment
•Keep the product away from heating appliances and devices that generate electrical noise, such as
fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of the
product.
•Do not place the product in rooms where the temperature is less than 0 ℃ (32 ℉) or greater than 40 ℃
(104 ℉).
•Allow 10 cm (4 in) clearance around the product for proper ventilation.
•Avoid environments with excessive smoke, dust, moisture, mechanical vibration, shock, or direct sunlight.
•The apparatus is designed to be installed and operated under controlled conditions of ambient
temperature and a relative humidity.
Routine Care
•Unplug the AC adaptor from the AC outlet and disconnect the Ethernet cable before cleaning.
•Wipe the product with a soft cloth.
•Do not clean the product with abrasive powder or with chemical agents such as benzine or thinner.
•Do not use liquid cleaners or aerosol cleaners.
Placement
•Do not place heavy objects on top of the product.
•Care should be taken so that objects do not fall onto, and liquids are not spilled into the product.
Optional Equipment (KX-HDV230 only)
•A KX-HDV20 (20 Key Expansion Module) can be used with the product.
•The KX-HDV20 can be used only when the product receives power from the optional AC adaptor; it
cannot be used when the product receives power via Power-over-Ethernet (PoE).
•Up to 5 KX-HDV20 units can be connected to the product.
To mount a second KX-HDV20 unit or more, mount each in turn, unattached to the main unit.
1.4 For Best Performance
Document Version: 2017-08 Operating Instructions 11

1.4 For Best Performance
12 Operating Instructions Document Version: 2017-08

Section 2
Before Operating the Telephones
This section shows you the basic information for your
telephone.
Document Version: 2017-08 Operating Instructions 13

2.1 Accessory Information
Included Accessories
KX-HDV130
Handset: 1 Handset Cord: 1 Stand: 1
KX-HDV230
Handset: 1 Handset Cord: 1 Stand: 1
Wall Mounting Adaptor: 1 Screw for wall mounting adaptor:
1
Screws for wall mounting: 2
Optional Accessories
KX-HDV130
Model AC Adaptor *1 Wall mount kit
KX-HDV130 KX-A423 (PQLV219) KX-A440
KX-HDV130C
KX-HDV130NE KX-A423CE ( PQLV219CE) KX-A440X
KX-HDV130RU
KX-HDV130X KX-A423AG (PQLV219AG) /
KX-A423AL (PQLV219AL) /
KX-A423BR (PQLV219BR) /
KX-A423CE (PQLV219CE) /
KX-A423E (PQLV219E) /
KX-A423X (PQLV219)
KX-HDV130SX KX-A423SX (PQLV219SX) KX-A440SX
*1 •To order an optional AC adaptor, please order using the "KX-A423xx" model number. For details about which AC adaptor
model number you should order, consult your dealer.
•This unit complies with the IEEE 802.3af Power-over-Ethernet (PoE) standard. If PoE is available on your network, this unit can
receive the necessary power from the network through the Ethernet cable. In this case, no AC adaptor is needed. However, if
PoE is not available, you will need to connect an AC adaptor to the unit.
2.1 Accessory Information
14 Operating Instructions Document Version: 2017-08

KX-HDV230
Model AC Adaptor *1 20 Key Expansion
Module
KX-HDV230 KX-A422 (PNLV228) / KX-A424 (PNLV6508) KX-HDV20
KX-HDV230C
KX-HDV230NE KX-A422CE (PNLV228) / KX-A424CE (PNLV6508) KX-HDV20NE
KX-HDV230RU KX-A424CE (PNLV6508) KX-HDV20RU
KX-HDV230X KX-A422X (PNLV228) / KX-A424X (PNLV6508) /
KX-A422AL (PNLV228) / KX-A424AL (PNLV6508) /
KX-A422CE (PNLV228) / KX-A424CE (PNLV6508) /
KX-A422UK (PNLV228) / KX-A424E (PNLV6508) /
KX-A424AG (PNLV6508) / KX-A424TW (PNLV6508) /
KX-A424BR (PNLV6508)
KX-HDV20X
KX-HDV230SX KX-A424SX (PNLV6508) KX-HDV20SX
*1 •To order an optional AC adaptor, please order using the "KX-A422xx/KX-A424xx" model number. For details about which AC
adaptor model number you should order, consult your dealer.
•This unit complies with the IEEE 802.3af Power-over-Ethernet (PoE) standard. If PoE is available on your network, this unit can
receive the necessary power from the network through the Ethernet cable. In this case, no AC adaptor is needed. However, if
PoE is not available, you will need to connect an AC adaptor to the unit.
KX-HDV20 Included Accessories (for KX-HDV230 only)
Stand: 1 Connection cable: 1 Wall mounting adaptor: 1
Screw for wall mounting adaptor:
1
Screws for wall mounting: 2 Screw for attaching the
KX-HDV20 to the unit: 1
Note
•For users in the United States only
–To order accessories, call toll-free 1-800-332-5368.
2.1 Accessory Information
Document Version: 2017-08 Operating Instructions 15

2.2 Installation and Setup
Note
•Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out
of improper installation or operation inconsistent with this documentation.
WARNING
•To reduce the risk of fire or electric shock, do not overload AC outlets and extension cords.
•Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause electric
shock and/or excessive heat resulting in a fire.
•Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet,
then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc.
resulting in a fire.
2.2.1 Attaching the Stand
Attach the stand to the desk phone.
1. Insert the stand into the slots located in the unit.
2. Gently rotate the stand in the direction indicated until it is fixed.
KX-HDV130
KX-HDV230
2.2 Installation and Setup
16 Operating Instructions Document Version: 2017-08

KX-HDV20
2.2.2 Adjusting the Stand Position
Push the PUSH marks in the direction indicated, with both hands, and tilt and slide the stand until it
becomes fixed in the desired position.
•Lowering the stand
EXAMPLE: KX-HDV230
•Raising the stand
EXAMPLE: KX-HDV230
PUSH
PUSH
PUSH
PUSH
2.2.3 Removing the Stand
Tilt the stand in the direction indicated while pushing the PUSH marks with both hands.
EXAMPLE: KX-HDV230
PUSH
PUSH
2.2.2 Adjusting the Stand Position
Document Version: 2017-08 Operating Instructions 17

2.2.4 Attaching the Optional KX-HDV20 to the Unit (KX-HDV230
only)
The optional KX-HDV20 has 20 DSS keys, and it adds 40 function keys (20 keys × 2 pages) to the unit.
These keys can be used to seize a line to make or receive a call or to perform a feature that has been
assigned to the key.
1. Remove the stand from both the KX-HDV230 and KX-HDV20.
2. Insert the tabs of the KX-HDV20 into the designated openings in the base, and then slide the KX-HDV20
in the direction of the arrow.
3. Fasten the KX-HDV20 to the unit with the included screw.
23
4. Attach the stand to both the KX-HDV230 and the KX-HDV20. See "2.2.1 Attaching the Stand". Or, if the
unit will be mounted on a wall, perform wall mounting.
5. Connect the KX-HDV20 to the unit with the included cable.
6. Turn on the KX-HDV230.
Note
•Up to 5 KX-HDV20 units can be connected to the product.
2.2.4 Attaching the Optional KX-HDV20 to the Unit (KX-HDV230 only)
18 Operating Instructions Document Version: 2017-08

2.2.5 Connections (including optional KX-HDV20)
Connect the Ethernet cable, the Handset Cord and the AC adaptor (option) to the unit.
Notice
•The KX-HDV20 can be used only when the product receives power from the optional AC adaptor; it
cannot be used when the product receives power via Power-over-Ethernet (PoE).
Note
•KX-HDV20 can be used with KX-HDV230.
KX-HDV130
*1
*3
*4
*2
2.2.5 Connections (including optional KX-HDV20)
Document Version: 2017-08 Operating Instructions 19

KX-HDV230 / KX-HDV20
*1
*4
*6
*3
*5
*2
*1 PoE HUB
*2 LAN cable
*3 Optional AC adaptor
*4 Optional headset
For up-to-date information about headsets that have been tested with this unit, refer to the following web sites:
https://panasonic.net/cns/pcc/support/sipphone/
*5 Connection cable
Connect the connection cable as shown in the illustration.
*6 Optional EHS headset
For up-to-date information about EHS headsets that have been tested with this unit, refer to the following web site:
https://panasonic.net/cns/pcc/support/sipphone/
Note
•The initial setting for the IP address is "DHCP–Auto". For information about your network
environment, contact your administrator.
When selecting Ethernet cables (not included)
•Use flexible cables without jack covers. Do not use cables with a hard coating that may tear or crack
when bent. To prevent damage to the cables, use cables that do not protrude from the bottom of the
base.
•Connect the cables as shown in the following illustration.
2.2.5 Connections (including optional KX-HDV20)
20 Operating Instructions Document Version: 2017-08