Pantum P1000 Series User manual

User Guide
P1000/P2000 Series
Laser Printer
http://www.pantum.com

Trademark
Pantum and Pantum logo are registered trademarks of Zhuhai Seine Technology Co., Ltd.
Microsoft, Windows, Windows server and Windows Vista are either registered trademarks of Microsoft
Corporation in the United States and other countries.
The ownerships of software names related to this User Guide in accordance with corresponding license
agreement belong to their respective owned companies.
All other product and brand names herein maybe the registered trademarks, trademarks or service marks of their
respective owners.
Ⅰ
Copyright
© 2012 Copyright Zhuhai Seine Technology Co., Ltd
Reproduction, adaptation, or translation without prior written permission is prohibited, except as
allowed under the copyright laws.
Version:V1.1 AA2B-2786-AL0
Legal notices
Disclaimer
The information contained herein is subject to change without notice.
Users are responsible for any damages caused by operation not specified in the User Guide. Meanwhile, Zhuhai
Seine Technology Co., Ltd. does not make any express or implied warranty or guarantee for the User Guide
(including composing or words) other than express warranty on product maintenance and service. Using this
product to print certain documents and images may be prohibited by local law. If you are uncertain about the
legality of using this product to print certain documents and images, you should consult in advance with your
legal advisor for guidance.

Safety precautions
Ⅱ
The device has a Class IIIB laser diode in the laser unit. You should not open the laser unit under any
circumstances to avoid exposure to the laser beam. Since radiation emitted inside the device is completely
confined within protective housings and external covers, the laser beam cannot escape during any phase of
normal user operation.
Laser safety statement
Safety information
These warnings and precautions are included in order to prevent injury to you and others, as well as
preventing any potential damage to your machine. Be sure to read and understand all of these instructions
before using the machine.
Use common sense for operating any electrical appliance and whenever using your machine. Also, follow
all warnings and instructions marked on the machine and in the accompanying literature. After reading this
section, keep it in a safe place for future reference
WARNING
Using controls, making adjustments, or performing procedures other than those specified in this
user guide may result in exposure to hazardous radiation.
The label shown below is attached to the laser scanner unit inside the machine.

Please comply with the following general guide lines for operating electrical equipment:
Ⅲ
There is high voltage electric current in the equipment. Before servicing
the printer, please turn the printer off and unplug the power cord from the
AC power supply wall outlet.
Touching the power cord and AC power supply wall outlet with a wet
hand can result in an electric shock.
Parts of the printer will be hot after printer operation.
Do not touch the fuser unit when opening the front or
rear covers.
The Caution label warns of areas that will get hot. Please do not
remove or damage this label.

Regulatory Information
Ⅳ
This symbol indicates that, at the end of your product life, it must not be discarded as domestic waste. Instead,
you should dispose of your used equipment to a designated collection point for the recycling of waste electrical
and electronic equipement. Ref: EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE). Please contact your distributor / supplier for further information.
This product is suitable for indoor use only.
European Community (EC) directives conformity
This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and
2006/95/EC on the approximation and harmonization of the laws of the Member States relating to
electromagnetic compatibility
and safety of electrical equipment designed for use within certain voltage limits.
The manufacturer of this product is: Zhuhai Seine Technology Co., Ltd., No. 63, Mingzhubei Road, Xiangzhou
District, Zhuhai City, Guangdong, P.R. China.
A declaration of conformity to the requirements of the Directives is available upon request from the Authorized
Representative.
This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

VI
Table of Contents
1. Product information
1.1. What’s in the box............................................................................................................ 1
1.2. Product features............................................................................................................. 2
1.3. Overview......................................................................................................................... 3
1.3.1. Front view....................................................................................................................... 3
1.3.2. Rear view ........................................................................................................................ 4
1.4. Printer installation.......................................................................................................... 5
1.4.1. Power supply .................................................................................................................. 5
1.4.2. Environment ................................................................................................................... 5
2. About paper
2.1. Paper types and sizes ..................................................................................................... 6
2.2. Loading paper................................................................................................................. 7
2.3. Paper options ................................................................................................................. 8
2.4. Printing on envelopes and transparencies..................................................................... 8
2.4.1. Printing on envelopes..................................................................................................... 8
2.4.2. Printing on transparencies ............................................................................................. 9
2.5. Printable area ............................................................................................................... 10
3. Printing
3.1. Printing Methods.......................................................................................................... 11
3.2. Basic printing with Windows ........................................................................................ 11
3.2.1. To print a document with Windows............................................................................. 11
3.2.2. Setting the printing parameters in the Print dialog box............................................... 12
3.3. Advanced printing using the printer driver settings..................................................... 14
3.3.1. Priority of printer settings ............................................................................................ 15
3.3.2. To change printer driver settings for Windows............................................................ 16
3.4. Using the Basic printer driver settings ......................................................................... 16
3.4.1. To print multiple copies of a document ....................................................................... 17
3.4.2. To reverse the order the pages are printed ................................................................. 18
3.4.3. To set the orientation of the page on the paper.......................................................... 18
3.4.4. To set print resolution .................................................................................................. 18
3.5. Using the Paper printer driver settings ........................................................................ 19
3.5.1. To set the size of the paper for standard or predefined custom paper sizes .............. 19
3.5.2. To define and manage custom paper sizes .................................................................. 20
3.5.3. To print on different media types ................................................................................ 20
3.5.4. To change the feed edge of the paper ......................................................................... 21
3.5.5. To manually duplex a document (print on both sides of the paper) ........................... 21
3.6. Using the Layout printer driver settings....................................................................... 23
3.6.1. Printing multiple pages on one sheet of paper............................................................ 24
3.6.2. To print a poster (one page on four sheets of paper).................................................. 24
3.6.3. To scale a document..................................................................................................... 24
3.6.4. To create different printing effects .............................................................................. 25
3.7. Using the Background printer driver settings .............................................................. 25
3.7.1. Printing a watermark.................................................................................................... 26
3.7.2. Creating and managing text watermarks..................................................................... 27
3.8. Using the Current Settings function ............................................................................. 28
3.8.1. To use a previously saved Current Settings.................................................................. 28
3.8.2. To save a new set of Current Settings.......................................................................... 29
3.9. Managing printer tasks (the print queue) .................................................................... 29
3.9.1. To view documents waiting to print............................................................................. 30
3.9.2. To pause or resume printing a document.................................................................... 31
3.9.3. To restart printing a document .................................................................................... 31
3.9.4. To change the printing priority of a document ............................................................ 31
3.9.5. Other changes to documents in the print queue......................................................... 32

VII
4. Installation and removal of the driver
4.1. Driver installation ......................................................................................................... 33
4.2. Driver removal.............................................................................................................. 36
5. Control panel operation
5.1. Control panel instructions............................................................................................ 37
5.2. The meaning of the LED indicators............................................................................... 38
6. Routine maintenance
6.1. Consumables ................................................................................................................ 39
6.1.1. Print cartridge maintenance......................................................................................... 39
6.1.2. How to replace the print cartridge............................................................................... 39
6.2. Cleaning the printer...................................................................................................... 41
7. Troubleshooting
7.1. Identification ................................................................................................................ 43
7.2. Indicators...................................................................................................................... 43
7.3. Common troubleshooting tips...................................................................................... 43
7.3.1. Common trouble resolution ......................................................................................... 43
7.3.2. Trouble shooting the driver installation....................................................................... 45
7.3.3. Troubleshooting image defects.................................................................................... 46
7.4. Clearing paper jams...................................................................................................... 49
8. Product specifications and safety information
8.1. Product specifications .................................................................................................. 51
8.1.1. Common specifications ................................................................................................ 51
8.1.2. Media specifications..................................................................................................... 52
8.1.3. Printings specifications................................................................................................. 52
8.1.4. Consumables ................................................................................................................ 53
8.2. Safety specification information .................................................................................. 53
8.2.1. Radio interference........................................................................................................ 53
8.2.2. Laser Safety Information .............................................................................................. 53
8.2.3. Internal laser radiation ................................................................................................. 53

1. Product information
1.1 What's in the box
Лаз ерный пр интер
Драй веры
Утил ита
Доку ментаци я
Pan tum сер ии P100 0/P20 00
AA2E 05 4 9DQ0 V1 . 0 0
С
.
2
0 L
td
1
1
o.
,
Z
y
C
h
u
h
lo
g
ai
S
e
in
e T
ec
h
no
1
1
1
1
1
1
1

1.2 Product features
2

1.3 Overview
1.3.1 Front view
2
1
3
4
5
6
8
7
9
1
2
3
4
5
6
7
8
3

1.3.2 Rear view
1
2
3
1
2
3
4

1.4 Printer installation
1.4.1 Power supply
1.4.2 Environment
10 - 32.5 C
20% - 80%
50 90.5 F-
5
Note:

2.About paper
2.1 Paper types and sizes
6

7
2.2 Loading paper
Note:

8
2.3 Paper options
2.4 Printing on envelopes and transparencies
2.4.1 Printing on envelopes

9
Note:
2.4.2 Printing on transparencies
WARNING
WARNING

10
2.5 Printable area
1
23
4
Note:

3. Printing
3.1 Printing Methods
11
Note:
Note:
3.2 Basic printing with Windows
3.2.1 To print a document with Windows

12
3.2.2 Setting the printing parameters in the Print dialog box
Note:
Note:

13
Note: