Paradyne HOTWIRE 7925 User manual

TM
1
7925-A2-GK40-00 August 1997
HotWire 7925 E1 HDSL Standalone Termination Unit
Errata
Document Number 7925-A2-GK40-00
August 1997
There is an error in the User’s Guide (Document No. 7925-A2-GB20-30) that was detected after printing.
Please make note of the following correction.
Page C-4 shows the switchpack definitions for V.35-compatible units. In the table on the left for
Switchpack S1, the definition for Switch Position 1 is incorrect. The correct definition is:
Switch Position 1: OFF = CP
ON = CO (default setting)
97-15265-0
3
S1
S2
P8
V.35
Switchpack S1 Switchpack S2
Jumper P8
VT100 Terminal
Modular Jack
HDSL Line Jack
P4
P1 P2
P10 P11
P9
P5
678
ON
12345
Position
1
2
3
4, 5
6, 7, 8
Settings*
OFF = CP
ON = CO
OFF = Loops A and B
ON = Loop A
unused
00 or 11 = Internal
Clock
01 = External Clock
10 = Loop Clock
unused
Position
1
2
3
4
5
6
7
8
Settings*
ON = 64 kbps
ON = 128 kbps
ON = 192 kbps
ON = 256 kbps
ON = 384 kbps
ON = 512 kbps
ON = 768 kbps
ON = 1024 kbps
All ON = 64 kbps
All OFF = 2048 kbps
Pins*
1-2
2-3
Settings*
Terminal Mode
Switchpack Mode
678
ON
12345
* Default in bold
Figure C-2. V.35-Compatible Unit Switchpack and Jumper Locations