Paragon 750I User manual

Digital entry eliminates the need for making
multiple key copies
Stronger internal mechanisms prevent forced entry.
handguns
Opens with secret PIN code or included keys
(2 FREE KEYS)
Includes a 5 gun rack
Includes an Interior locking cabinet with a different
set keys (2)
of times by the user
Solid steel construction body and door
Concealed hinges for anti-theft protection
Simple programmable Electronic Lock with
buzzer and LED. 3 to 6 numbers.
Runs on AA SIZE(1.5V) batteries
Constructed with 18 gauge solid steel to resist
hand and mechanical tool attacks
allowing anchoring.
Powder coated interior and exterior
Constructed of extra thick solid steel
Inside tamper-proof hinges
Grey carpet mat padding on inside bottom
Anchor bolts are included
Outside Dimensions without handle: 57” H; 13 3/4” W; D 11 3/4”
Outside Dimensions with handle: 57” H; 13 3/4” W; 14” D
Inside Dimensions: 56 3/4” H; 13 1/2” W; 9 1/2” D
Door Opening: 54 1/2” H; 11 3/4” W
Inside upper compartment dimensions: 13.5” W; 7.5” D; 6.5” H
Inside compartment opening: 3.875” H; 6.75” W
Interior Capacity: 4.26 Cubic Feet
Weight: 110 lbs
Copyright © Paragon Lock and Safe. All rights reserved.
9

1. Remove the key hole cover on the key pad.
2. Insert the key and turn counter-clockwise to unlock the safe.
3. Turn the handle clockwise to open the door.
1. Remove the battery cover plate located on the inside of the outer door.
2. Install 4 AA alkaline batteries provided.
3. Replace the battery cover.
NOTE: If both the red and green lights are on while the safe is open, this indicates that the batteries are low and need
to be changed.
1. With the door open, locate the red button on the back of the door near the hinge.
2.Press the red button and listen for the beep.
3. Enter your new user passcode (3-6 digits long)
4. Immediately after entering your passcode press the “*” or “#” button on the keypad. Your new user passcode is now stored.
NOTE: This safe stores up to 2 passcodes (a user code and a manager code). Entering a third code will erase the
1. Open your safe with the passcode you wish to change and leave the door ajar.
2. Press the “0” button on the keypad twice. Press the red button, listen for a beep and then enter your new user passcode.
New user passcodes may be 3-6 digits long.
3. Immediately after entering your new code, press the “*” or “#” button on the keypad. Your user code is now changed.
1. Input your code and then press the “#” button, the green light will turn on.
2. Turn the knob clockwise within 5 seconds to open the door.
CAUTION: Entering an incorrect code (3) times will lock the system for 20 seconds.
1. Turn the knob counter-clockwise, the mechanism will automatically lock the safe.
Your safe comes with 2 separate sets of keys, one for the exterior door and one for the interior locking
cabinet. DO NOT store your keys inside the safe!
Continued on next page
for keeping your guns/weapons in a safe secure place. The innovative design/styling will impress you and the
you’ll love your new safe, we’re including a full 10 year warranty! Please take a moment to read this manual for
important use and safety information. Keep this manual in a safe place for future reference.
Copyright © Paragon Lock and Safe. All rights reserved.
10
Override Key Cover

sleeve anchors, which are at least 2 inches long. The holes for the anchors can be drilled through the holes that are already in the
safe. You do not need to move the safe to install the anchoring bolts.
NOTE: After the anchor bolts are installed, carefully open and close the safe door and check for smooth operation of the locking
mechanism. If any resistance is encountered, check the safe for being level.
The safe MUST BE
If the safe is sitting on carpet or an uneven surface, it could topple over when the door is open.
Copyright © Paragon Lock and Safe. All rights reserved.
11