Patchwork Technology BlackBox Marine User manual

Guidance & VRT Guide
Installation
1
2
3
4
5
6
7
Antenna
Fit centrally on the roof.
Cable completely uncoiled.
Marine Unit
See ‘Mounting Positions’
diagram on next page.
Android Tablet*
Mount to the windscreen
using supplied suction
mount.*
Interface Harness
Insert into connector and
fasten bolt with a ¼ inch
socket (Be sure not to over
tighten).
USB Charge cable
Connect to ‘CHARGING’.
Always keep connected.
Supplied Cable for
Controller
Connect to 16 way socket.
Power cable
To power supply.
Do not connect until all
connections are made!
1
3
2
4
5
6
7
*Important! Remove from windscreen when not in use.
PWdoc0084 v1.1

A
B
CD
E
F
G
Y
X
Y
X
Y
X
Y
X
Y
X
Y
X
Y
X
General Setup
Mounting Positions
Congure Tilt
Job Recording
Setup > Position Setup > Tilt Setup
Setup > Recording Setup
Press Tilt and Enable.
Press Recording and Enable.
Enter Vehicle name.
Set Orientation as per
‘Mounting Positions’ diagram.
Enter Operator name.
Position on level ground.
Press Zero Tilt.
1
1
2
3
3
4
Set the Antenna Height.
2

Work Mode Setup
Setup > Work Mode Setup
(Refer to Work Mode Setup Guide supplied with the cable)
Select *NEW*
Highlight name
Select connected VRT
Controller.
Enter osets as required.
Enter Width and select
Master Switch Mode.
1
1
3
5
4
Master Switch Mode
Switch – External Feed
On Screen – Press screen ON/OFF button
Always Record – Continuous recording
Switch Reverse – External Feed, polarity
reversed
Controller – On/O message from controller
(some do not give feedback)
Enter name and OK.
Select / Edit / Delete
7
2
Prole List
Press Autoshuto and
Enable, enter Settings.
6
Select VRT and
Autoshuto
2

Copying Application Plans to the Tablet
Fit the tablet and USB
cable back in the vehicle.
6
Connect tablet
via USB to the PC. Press ‘Turn on USB storage’.
Press ‘Turn o USB storage’
and disconnect from the PC.
12
5
On the PC locate device in
windows explorer and go to
Internal Storage>BlackBox.
If BBA format copy plans into
the ‘bbales’ folder or Shape
format into the ‘shapevrt’ folder.*
3
4
*Important! Ensure that only the individual les are copied into the
Tablet folders and not a folder/ziple of les.

1
910
6
7
8
5
2
3
4
Starting a Job
Job Screen Overview
Press Start Job.
Enter default rate and OK.
Press Farm and select
Farm/Field/Plan name.
1
5
3
Check before starting.
Press VRT Job.
Conrm Guidance Options.
2
4
Tip! To start a job without a variable rate plan select ‘New Job’ in step 2.
1. Start/Pause Boundary
2. Close Boundary
3. Guidance Options
4. Master Switch Status
5. Mini Map / Toggle 2D mode
6. AutoShuto Override (5s)
7. Conguration
8. Menu
9. AutoShuto Indicator Bar
(Green = On White = O)
10. Information Panel

Press. Set the Oset
Press Start. Drive around the eld
back to the start point.
Important! Start a boundary recording at least 30 metres away from the corner of a eld.
12
34
Boundary Recording (Measuring Field Area)
Setting and Using a Guidance Line
Tip! When following a guidance line gently drift into position when lining up.
1
2
3
At the beginning of a run, move
forward and press the screen.
Drive to the end of the
run and press the screen.
1
Turn onto the next run, line
up and follow along the run.
Point A set
Guidance
line set
Line up red
arrow to line
23

Using Variable Rate Plans
Ensure the Master
Switch Status is ON.
Work the eld as normal and the system will
automatically change the application rate.
1
2
Menu
Reset Zoom
Zoom In
Zoom Out
Using Spreader Control
Tip! Press ‘AutoShuto
Override’ to allow over
application in tight areas
and short work.
Drive around the headland
applying product.
When the starting point is
driven through the application
will automatically stop.
Stop the implement and
line up for the rst run.
Turn on the implement and apply
product to the inner area of the eld
working in and out of the Headland.
2
3
4
5
Ensure the Master
Switch Status is ON.
1

Press Pause Job.
2
Pausing Jobs
Press Start Job.
1
Resuming Jobs
Finishing a Job and Shutdown
Press.
Press.
Press Finish Job. Press Shutdown > Yes and
disconnect from power.
1
1
23
Press Resume Job.
Highlight Job.
2
3