Patriot Lighting LV7030 User manual

Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326.
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
Sku Number: 343-4174
LOW VOLTAGE LED PATH LIGHT
Model Number: LV7030
Page 1 of 3
A
B
C
E
PACKAGE CONTENTS

Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters,
Safety Glasses, Ladder.
Page 2 of 3
SAFETY INFORMATION
PREPARATION
Quick Connector
Fixture installation
ASSEMBLY INSTRUCTIONS
1. Secure the tube (B) into the arm (A)
then secure the ground stake (C)
into the lower tube (B). Then gently
insert the ground stake (C) into the
ground .Never push the fixture into
the ground by the fixture head.
(Fig.3)
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
CAUTION
Contact Pin
Contact Pin
Power Wires
Power Wires
1. Open the connector (E) of fixture
wires and insert the wires of power
adaptor into the connector (E).
2. Restore the connector (E) and
allow contact pins of connector (E)
to prick wires for a result of
connections.
2. Attach the fixture to the power cable with the quick
connector as show in Fig.4. To insure uniform
brightness the first fixture should be a minimum of 10
feet (3 meters) from the transformer “Fig.4”.
1
2
E
E
12
"(30cm)
10 ft. (3m)
GFCI
The Quick Connector intended for use
with SPT-2W 18G, SPT-2W 16G,
SPT-2W 14G and, SPT-2W 12G
Outdoor Cables.
4
3
A
B
C
C
Ground
The maximum power of the LED module is 1.4W
LED

Page 3 of 3
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails due
to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this lighting
fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT
LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT
LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser
with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does
not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary
from state to state.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326.
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
TROUBLESHOOTING
R
R
R
CARE AND MAINTENANCE
R
Clean the glass and coated metal surfaces with a non-abrasive cleaner. Do not use any cleaners with chemicals,
solvents or harsh abrasives, The motion detecting lens is coated with a specially painted finish and requires special
care when cleaning. Use only a soft dry cloth to dust or wipe the lens area.
If the light does not work at all:
1. Make sure the switch and circuit breaker are on.
2. Make sure the wiring connection is correct.
3. Make sure the photocell is not exposed to light (if have photocell).
4. Make sure the connections between contact pins of connector and wires of power adaptor is in good conditions.
Caution:
a. The included cable connectors are to be used only on low voltage power cable with SPT-2W or equivalent 18, 16,
14, or 12 AWG cable.
b. The fixture’s cable and connector shall:
● Be protected by routing in close proximity to the light fixture, or next to a building structures such as a house or deck.
● Not be buried except for a maximum 6 inches (15.2 cm) to connect to the main low voltage cable.
● Have a length such that the connector is within six inches (15.2 cm) from the light fixture or a building structure.
c. Do not use cable smaller than listed in chart below.
SELECT CABLE. Use the chart below to determine the MINIMUM gauge cable to be used, depending on the wattage
of the power pack. Using large cable will ensure maximum light output.
Glass Panel
9950CS(4PCS)
The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326.
If unable to fix any of the above issues, please consult a certified electrician.
Spare Parts List:
PowerPack Wattage
240-300 12
14-12
16-14-12
18-16-14-12
120-240
60-120
0-60
Minimum Guage Cable