Backyard Creations RTS873B User manual

PARTS LIST
PAGE 1 OF 3E-320
FIGURE 1
PART
NO. MATERIAL CODE PART Q’TY
1 1
1
1
1
1
1
1
9
11
12
13
14
15
16
2
3
4
5
6
7
RTS873B-CS03-1
RTS873B-CS02-1
RTS873B-CS01-2
RTS873B-CS01-3
RTS8350-CS19-1
RTS624K-CS12-1
18000744004
2
2
17C33A0710001YX
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
BOLT M6*30
BACK ASSEMBLY
LEFT ARM
RIGHT ARM
SEAT POST
BASE ASSEMBLY
SEAT ASSEMBLY
DECORATIVE
PLASTIC COVER
48 17C33A0706001YX
BOLT M6*15
4
17C01A0816071YX
BOLT M8*45
10 1
17C33A0712001YX
BOLT M6*35
WASHER d8.5*D17*1.6
1
4
8
17FA05100701-YX
17FA08060601-YX
17D03A040401-YX
JAM NUT M8*1.25
WASHER d6.5*D30*2.0
8
17
18
17FA05040301-YX
WASHER d6.5*D13*1.0
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED FOR RESIDENTIAL USE ONLY.
500 10 20 30 40 60 70 80 90
mm 100
PARTS REQUIRED: 1 & 2
PINE MEADOW SWIVEL ROCKER 2PK
SKU#2721014 / MODEL#RTS873B
BOLT M6*65
17C33A0755001YX
Use the correct bolts as indicated. Do not tighten any of the bolts until the swivel rocker chair is completely
assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC No. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
!
!
!
!
!
PART
NO. MATERIAL CODE PART Q’TY
1
61R873BC00001BA
SEAT CUSHION
2
17EF1201-----23
WASHER
Ⅰ
Ⅱ
Ⅰ
Ⅲ
Ⅳ
Tools
1
2
1
2

FIGURE 4 FIGURE 5
FIGURE 2 FIGURE 3
PARTS REQUIRED: 1, 2, 11, & 15
Keep the bolts loose.
PARTS REQUIRED: 1, 3, 4, 9, & 15 PARTS REQUIRED: 2, 5, 12, 13, 16, & 17
Tighten all bolts by using the supplied Hex key.
7
66
A
7A
7
PARTS REQUIRED: 2, 3, 4, 8, & 15
Keep the bolts loose.
E-320
Tighten all bolts by using the supplied Hex key.
1
2
11
15
3
4
L
R
2
3
4
1
2
5
8
8
15
15
Note:
The labels marked “L” and “R” on arms (#3 and #4) should
coincide with Figure 3 to ensure proper assembly.
9
15
FIGURE 6
PARTS REQUIRED: 6 & 7
17
17
13
13
13
13
2
16
16
12
12
5
FIGURE 7
PARTS REQUIRED: 5, 6, 10, & 14
5
6
10
14
Note:
For ease with installation, we recommend that the seat
post (#5) be slightly oiled or waxed before fastening to
the base assembly (#6).
PAGE 2 OF 3

Warranty
• One–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
•It remains the customer’s responsibility for freight and packing charges to and from the service center.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOUHAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
E-320
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
• The cushions may be washed on the surface only by using mild soap and water or commercial foaming
upholstery cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and
safety of your swivel rocker chair.
• In order to prolong the life and beauty of your swivel rocker chair, we recommend that it be stored in a dry and
protected area during off season periods.
FIGURE 8
PARTS REQUIRED: 18
18
Caution:
To ensure one’s safety during use of this swivel rocker
chair, examine all of the bolts to make sure that they
are securely fastened. This is a chair with swivel rocker
ability; therefore, use by young children should be adult
supervised.
PAGE 3 OF 3