Sunjoy D-DN1508SAL User manual

February 16 Made In China 1/ 3
ASSEMBLY IINSTRUCTIONS
D-DN1508SALTable
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569
from 8:00 AM EST to 8:00 PM PST or email to [email protected] or visit www.sunjoyonline.com to
place your order or fax your parts replacement order form together with your purchase receipt to 1-740-283-3549 for
assistance.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of 12
Months. However, we don't reimburse for transportation or delivery costs, or compensate the individual or any outside
party for assembling or disassembling the product. This limited warranty is extended to the original purchaser and
applies to defects in materials and workmanship of your item, provided the item is maintained with care and used only
for personal residential purposes.

February 16 Made In China 2/ 3
Parts List
Part# Description Qty
A Umbrella cap 1
B Table top 1
C Leg 4
D Panel (L) 1
E Panel (S) 2
AA Bolt M6×20 24
BB Spring washer M6 24
CC Flat washer M6 24
DD Wrench M6 1
EE Foot pad (preassembled) 4
Step 1. Attach Leg (C) onto
Table top (B) with Bolt
(AA), Spring washer (BB)
and Flat washer (CC). Do
not fasten them at this step.
Step 2. Attach Panel (E)
onto Leg (C) with Bolt
(AA), Spring washer (BB)
and Flat washer (CC). Do
not fasten them at this step.

February 16 Made In China 3/ 3
Step 3. Attach Panel (D) onto
Panel (E) with Bolt (AA),
Spring washer (BB) and Flat
washer (CC). Fasten all bolts
and washers at this step.
Step 4. Turn upside the table
and place Umbrella cap (A)
on the umbrella hole of the
table top.
Now your table is ready for
use.

February 16 Made In China 1/ 3
ASSEMBLY IINSTRUCTIONS
D-DN1508SAL Chair
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569
from 8:00 AM EST to 8:00 PM PST or email to [email protected] or visit www.sunjoyonline.com to
place your order or fax your parts replacement order form together with your purchase receipt to 1-740-283-3549 for
assistance.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of 12
Months. However, we don't reimburse for transportation or delivery costs, or compensate the individual or any outside
party for assembling or disassembling the product. This limited warranty is extended to the original purchaser and
applies to defects in materials and workmanship of your item, provided the item is maintained with care and used only
for personal residential purposes.

February 16 Made In China 2/ 3
Parts List
Part# Description Qty
A Chair seat 1
B T-shape support 1
C Chair base 1
D Pillow 1
E Seat cushion 1
AA Bolt M8x40 4
BB Nut M8 4
CC Spring washer M8 4
DD Flat washer M8 4
EE Metal plate 4
FF Wrench M8 2
GG Foot pad (preassembled) 8
Fig 1. Attach Chair seat (A) onto T-shape support
(B) with Bolt (AA), Nut (BB), Spring washer
(CC), Flat washer (DD) and Metal plate (EE).

February 16 Made In China 3/ 3
Fig 2. Insert the assembled chair into Chair base (C)..
Fig 3. Place Cushion (E) on the chair
and fasten the hook and loop. Place
Pillow (D) on the chair.
Now your chair is ready for use.
Fig. 3