Rutland county garden furniture The double premium pergola User manual

Assembly Instructions

The Wall Mounted Premium

Double Pergola & Decking Kit

Before you commence the assembly process we recommend that you read these instructions thoroughly beforehand to

familiarise yourself with the assembly process and to also check that you have the correct components. If for any reason you

need assistance, you can find our contact details on the final page of these instructions.

We highly recommend that any assembly is carried out on an open flat, level surface if possible with sufficient space. You will

also require the assistance of at least 2 adults to complete assembly safely.

Please note: You can remove up to 400mm from the bottom of each post prior to commencing construction.

The Wall Mounted Premium Double Pergola & Decking Kit

The Rutland Wall Mounted Premium Double Pergola & Decking Kit

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Component List

Tools required:

10mm socket, No2 Pozidriv screwdriver (or electric driver) , step ladder

or platform.

75mm x

Woodscrews

65mm x

Woodscrews

70mm

coachscrews

120mm

coachscrews

Pre-drilled end

rafters

Rafters

Wallplate

2 x Runners

2 x Posts

4 x Braces

Base frame

2 x Edge joists

(with pencil

marks)

5 x cross joists

2 x Post deck slats

Deck slats

2 x Upstand deck

side slats

1 x Upstand deck

front slat

16 x Cladding

panels

If you have ordered your pergola with a roof slope please refer to the charts below for guidance of the difference

in length that you will need to cut your posts to accommodate the slope.

5°

10°

Rafter length (M)

Height diff (mm)

Rafter length (M)

Height diff (mm)

1.8

178

2.4

142

2.4

282

194

386

3.6

246

3.6

491

4.2

299

4.2

595

4.8

351

4.8

699

The Rutland Wall Mounted Premium Double Pergola & Decking Kit

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 1

Step 2

Affix your wall plate in the desired location, making sure

that the area directly in front of it is flat, level and able to

support the structure. Also check that the longer edge is

at the top. Attach the wall plate using suitable fixings for

the wall construction. Measure in 400mm from each end

and use sufficient fixings so that the minimum distance

between them is 500mm, distributed evenly and vertically

centred across the wall. Ensure it is horizontal with a laser

or spirit level.

Layout the Base frame assembly and 2 x Edge joists (pencil

marks on top) in a rectangle and then place the remaining

cross joists roughly in place as shown here.

Step 3

Step 4

Attach the edge joists to the base frame assemblies using

2 x 75mm screws in the pre-drilled holes, making sure that

the ends are flush and everything is square.

Butt the end of the joist closest to the wall up to the end

of the side frame, make sure everything is flush and

aligned and then screw through the pre-drilled holes in

the side frame into the joist end using 2 x 75 woodscrews.

Repeat for the other side.

The Rutland Wall Mounted Premium Double Pergola & Decking Kit

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 5

Step 6

Line up the ends of each infill joist end with the markings

on the edge joists, making sure the top faces are also

flush, before screwing each end into place with 2 x 75mm

woodscrews. Add the remaining joists to complete the

frame for the decking.

With the base assembly complete, slide it into place

against the wall. To ensure it is central on the wall plate,

mark the centre of the wall plate and the base and drop a

plumb line from the wall plate - adjust the base position

until the line and centre mark coincide.

Step 7

Step 8

Get an assistant to hold the first post in place, housing it

in the pocket formed where the base frame assembly and

edge pieces meet. Secure the post in place with a 70mm

coach screw through the Base frame assembly into the

post as shown here.

Have an assistant (or even two) help you lift one of the

runners (note the multiple notches), countersinks facing

outwards into place against the post tops.

The Rutland Wall Mounted Premium Double Pergola & Decking Kit

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 9

Step 10

Ensure the top of the runner is level with the posts and

the notches align either side of the post before securing

each end into place with 2 x 70mm coachscrews.

Attach a second runner to the other side of the posts from

the first runner then drop the pre-drilled outer rafters into

the slots on outer side of the posts and the appropriate

slots in the wallplate as shown above.

Step 11

Step 12

Secure each rafter in place with a 120mm coachscrew

driven down into the runner...

…and another 120mm coachscrew into the wallplate.

The Rutland Wall Mounted Premium Double Pergola & Decking Kit

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 13

Step 14

Add any remaining rafters…

Fixing each end into place with a 120mm coachscrew into

the runner and a second into the wall plate as before.

Step 15

Step 16

To fit the braces, slide a brace up between the

rafters/runners so that one end is flat against the post and

the other is flush with the top edge of the rafter/runners.

Fix the bottom end in place with a pair of 70mm

coachscrews into the post and the top end with two x

75mm through the rafter/runner into the brace.

The Rutland Wall Mounted Premium Double Pergola & Decking Kit

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 15

Step 16

Place one of the Post deck slats so that it runs post to

wall, perpendicular to the cross joists. Make sure the edge

is flush with the outer edge of the frame before securing

each end in place with 2 x 65mm woodscrews.

Align the rear facing end of the same section in place,

again aligning its outer edge with that of the frame section

before securing in place with 2 x 65mm woodscrews.

Step 17

Step 18

Find the most central joist and, having checked the edge

of the deck slat is flush with the frame edge (push/pull the

slat into place if required) secure in place with 2 x 65mm

woodscrews into the joist. Attach the second Post deck

slat to the opposite side of the base in the same way.

Now arrange the upstand edge decking pieces (marked on

the reverse as shown in the inset pictured) around the

perimeter of the frame with the front upstand deck piece

parallel to the base frame. Fix the end of each piece into

place at each post with 2 x 65mm woodscrews as shown

here.

The Rutland Wall Mounted Premium Double Pergola & Decking Kit

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 19

Step 20

Lay one of the deck slats across the base, perpendicular to

the joists. Make sure this slat sitting on the base

framework correctly and use this as a guide to ensure the

centre of the front upstand piece is flush with deck.

Push/pull the upstand up or down if necessary, before

fixing it into place with 2 x 65mm woodscrews.

Halfway between the post and the frame centre add

further intermediate screws to finish securing the upstand

edge slats in place. Attach the remaining upstand edge

slats to the sides.

Step 21

Step 22

Lay out all of the decking pieces across the cross joists and

adjust until you have them evenly spaced across the base.

Fix both ends of every slat down with 2 x 65mm

woodscrews.

The Rutland Wall Mounted Premium Double Pergola & Decking Kit

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 23

Step 24

Locate each of the infill joists by looking through the gaps

in between the slats and secure every decking slat to each

infill joist with a pair of 65mm woodscrews.

Attach four cladding panels to each post by aligning with

the post, bevelled face uppermost, and secure in place

with 4 x 65mm woodscrews.

Step 23

Your Rutland Wall Mounted Premium Pergola & Decking

Kit is now complete.

We hope that you found your product quick and easy to assemble but if not and you require any

further assistance or have any questions you can contact us by telephone on: 01778 440803

Email: [email protected]

www.rutlandcountygardenfurniture.co.uk

Other manuals for The Double Premium Pergola

This manual suits for next models

Table of contents

Other Rutland County Garden Furniture Outdoor Furnishing manuals