PB TEEN CHELSEA CORNER DESK User manual

Date: 11- Apr-16 www.pbteen.com Page 1 of 8
Rev:
CHELSEA CORNER DESK
ASSEMBLY INSTRUCTIONS

Date: 11- Apr-16 www.pbteen.com Page 2 of 8
Rev:
Important Safety Instructions:
•Please read all instructions carefully before assembling this desk.
•For your safety, assembly by two or more adults is strongly recommended.
•Keep these instructions for future use.
•Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the
structural integrity of the item.
Pre-assembly:
•Remove all parts and hardware from the box. Place all items on a carpeted or scratch-free work surface, as this
will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
•To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or contents of the
shipping carton until assembly is complete.
•Use the parts and hardware lists below to identify and separate each of the pieces included.
•The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
•The use of power tools to aid in assembly is not recommended. Power tools can damage the hardware and split
the wood.
Parts Included:
(1)
(2)
(3)
(4)
(5)
(6)
Corner Desk Top – Short Top
Post leg
Corner Desk Top – Long Top
Drawer base
Door base
Bun feet
1x
1x
1x
1x
1x
8x
Hardware Enclosed:
Door Base Hardware
a – Flat Washer
1/4” x Ф13 x 1 b - Spring Washer 1/4” x Ф11 x 1.2 c– Bolt 1 1/4” x 1” d - Allen Key M4 x 100mm x 30
2x 2x 2x 1x

Date: 11- Apr-16 www.pbteen.com Page 3 of 8
Rev:
Hardware Enclosed:
Drawer Base Hardware
a – Flat Washer
1/4” x Ф13 x 1 b - Spring Washer 1/4” x Ф11 x 1.2 c– Bolt 1 1/4” x 1” d - Allen Key M4 x 100mm x 30
2x 2x 2x 1x
Hardware Enclosed:
Corner desk top Hardware
e - Wooden dowel
1040
f – Bolt 2
5/16”*2-1/2”
g - Allen sleeve nut
5/16”* Ф16*3* Ф10*20
h - Spring washer 1
Ф5/16”* Ф13*1.8
2x 6x 4x 6x
i - Flat Washer 1
Ф5/16” x Ф19 x 2
j - Spring Washer 2
Ф3/8” x Ф15 x 1.8
k- Flat Washer 2
Ф3/8” x Ф23 x 2
l- Allen Key
M5 x 114 x 31
6x 4x 4x 1x
Assembly Instruction Steps:
1. Place all parts on a soft, scratch-free surface such as a rug or carpet.
2. Insert Bun feet (6) into the Drawer base (4) and the Door base (5) by attaching the bun feet’s bolt into holes
under the base. Make sure all the bun feet are tightened.

Date: 11- Apr-16 www.pbteen.com Page 4 of 8
Rev:
3. Remove the top drawer from the drawer base (4) and the Door base (5), as illustrate below.
4. Carefully align the Short Top (1) onto the Drawer base (4) . Slowly move the Drawer base (4), engage insert
the wood rail on the drawer base (4) into the gap between the wood rail and Short Top (1). Insert 2 set of Flat
Washer (a), Spring washer (b), bolts (c) into support rail on the drawer base (4) and Short Top (1), tighten the
bolt with Allen key (d).

Date: 11- Apr-16 www.pbteen.com Page 5 of 8
Rev:
5. Insert post leg (2) into the corner block of Long Top (3). Align the bolt holes on the leg with holes on corner
block. Insert 2 sets flat washer (i), spring washer (h), bolt (f) into corner block and leg (2), tighten by Allen
key (l).

Date: 11- Apr-16 www.pbteen.com Page 6 of 8
Rev:
6. With the help of another person, carefully align the Long Top (3) onto the Door base (5). Slowly move the
Door base (5), engage insert the wood rail on the Door base (5) into the gap between the wood rail and the
Long Top (1). Insert 2 set of Flat Washer (a), Spring washer (b), bolts (c) into support rail on the door base (2)
and Long Top (1), tighten the bolt with Allen key (d)

Date: 11- Apr-16 www.pbteen.com Page 7 of 8
Rev:
7. Slowly move the drawer base and the door base close enough to assemble two parts of the Corner Desk.
Align the bolt holes of the Short Top (1) and the Long Top (3), insert wooden dowel (e) to fixed parts (1) & (3)
Insert 4 sets flat washer (k), spring washer (j), Allen sleeve nut (g) into Long Top (3). Tighten by Allen key (l).
As illustration below.
Insert 4 sets flat washer (i), spring washer (h), bolt (f) into Short Top (1). Align the bolt (f) with Allen sleeve nut
(g), tighten by Allen key (l). As illustration below.

Date: 11- Apr-16 www.pbteen.com Page 8 of 8
Rev:
8. Replace the top drawers to the Drawer base and the Door base. If the base doesn’t sit level, adjust the
levelers under the bun feet, as shown below.
9. Assembly is complete.
Care Instructions:
•Dust often using a soft, dry, and clean lint-free cloth.
•Blot spills immediately and wipe with a clean, damp cloth.
•We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
•Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if
necessary.
Thank you for your purchase
Stores | catalog | www.pbteen.com