Pelsis INSECT-O-CUTOR HALO AQUA HL2X45IPX User manual

V171017
Information provided on these instructions is modied and updated from time to time. This is due to the constant redevelopment of
our products. As such, it is not intended that you should rely on it or that it should form part of any contract. © 2017 Pelsis
Sterling House
Grimbald Crag Close
Knaresborough
North Yorkshire
HG5 8PJ UK
T [phone]
F [phone]
W www.pelsis.com
W insect-o-cutor.co.uk
E [email protected]
– Instruction booklet
– Notice d’utilisation
– Bedienungsanleitungssprachen
– Libretto istruzioni
– Instrukcję
– Manual de instrucciones
– livreto de instruções
– Instructieboekje
– Instruktionsboken
Product code
HL2X45IPX
Description
Halo 2x45 Aqua
Dimensions (mm) HxWxD
588 x 404 x 236
Tubes
6 x TPX15-18S
Glueboards (x6)
GB013 (Yellow)
MOUNTING INSTRUCTIONS
550mm
(MINIMUM)
538mm

Professional Glueboard Insect Control English
Please read these instructions carefully and store in a
safe place for future reference.
HALO AQUA
As part of the Insect-O-Cutor®brand of insect control
products, Halo Aqua is a versatile professional ykiller
which utilises highly effective UV tubes and is designed
for use with a high specication Glupac®glueboard.
Halo Aqua is available as a 45W single sided model or
as a 90W double sided model. Halo Aqua is a IP45 rated
model, available as either a wall mounted or a ceiling
suspended version and is designed for use in demanding
environments. The Halo range also includes a 15, 30 or
45W model which can be wall or desk mounted, and a
2x30W model for ceiling suspension.
CONTENTS OF PACKAGE
- 1 x Halo Aqua ykiller
- 2 x Glupac® pheromone impregnated glueboards
- 2 x Removable aluminium debris trays
- 6 x High powered shatterproof UV tubes (tted)
- 2 x Suspension xing keyrings
- 2 x Mains cable retaining pins
- 1 x Servicing key fob
WARNING - THIS APPLIANCE MUST BE EARTHED (CLASS 1)
INSECT CONTROL PRODUCTS
Halo Aqua utilises high powered ultra violet tubes to
attract ying insects and retains the caught insects on
a pheromone impregnated glueboard for inspection or
hygienic disposal.
WARNING
Halo Aqua is IP45 rated and is designed for use in
applications appropriate to this ingress protection rating.
Halo Aqua is not to be used by children or persons with
reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been
given supervision or instruction.
Children should be supervised to ensure they do not play
with the appliance.
The mains cable cannot be replaced, if it is damaged
the unit must be replaced.
Halo Aqua is not suitable for applications where
potentially explosive environments may exist.
POSITIONING AND GUIDANCE FOR USE
THIS UNIT IS FOR INDOOR USE ONLY. NOT SUITABLE FOR
BARNS, STABLES AND SIMILAR LOCATIONS.
Halo Aqua should ideally be xed around two Metres
above the ground, preferably in the darkest place within
the area to be protected. ENSURE THERE IS A MINIMUM
OF 550mm BETWEEN ONE SIDE OF HALO AQUA AND THE
ADJACENT SURFACE, TO PROVIDE ENOUGH SPACE TO
INSERT THE GLUEBOARD (SEE MOUNTING INSTRUCTIONS.)
Do not position the unit close to windows, skylights or
other sources of light, or where it may be obscured by
furniture, doors or other obstacles. Ideally, Halo Aqua
should be visible from every part of the area to be
protected.
Halo Aqua should ideally be in operation for 24 hours
a day, ensuring your premises are kept free of ying
insects. Insects are most attracted to Halo Aqua at night
when there is no competition from daylight or other light
sources.
*Excludes tubes, glueboards and starters. Does not cover breakdown due
to misuse, incorrect operation or use in an incorrect application.
GUARANTEE
Halo Aqua has a three year guarantee and if maintained
as recommended in these instructions should continue to
work for many years.* Use of non-approved consumables
may invalidate the guarantee. Ensure genuine Glupac®
glueboards are used in conjunction with this product.
INSTALLATION
INSTALLATION SHOULD BE CARRIED OUT BY SERVICE
PERSONNEL ONLY.
Fix the suspension keyrings (supplied in the xing kit)
onto the suspension hooks on Halo Aqua. Then attach
two lengths of appropriate strength chain to the
suspension keyrings, ensuring that they have been cut
to the appropriate length so that Halo Aqua will hang at
around two Metres above the ground. Use appropriate
xing method to attach Halo Aqua and the suspension
chains to the suspending surface.
To suspend Halo Aqua, use a chain capable of bearing
at least 33 kg of load (consideration should also be given
to corrosion resistance).
Once Halo Aqua is installed in position, t the Glupac®
glueboards in place as described in the glueboard
replacement section of this document.
To connect Halo Aqua to the power source, run the
length of the cable up one side of the product, xing in
position with the two mains cable retaining pins.
Halo Aqua should then be hardwired into an appropriate
power source (as indicated on the specication label) by
a qualied electrician.
To maximise the effectiveness of Halo Aqua in catching
ying insects, the top of moulding has light apertures to
increase the UV irradiance emitted from the product.
However, if required, these apertures can be covered to
protect the glueboard from debris and prolong its life, by
simply sliding the reective aluminium cover forward.
Light Apertures
CLEANING
CLEANING SHOULD BE CARRIED OUT BY SERVICE
PERSONNEL ONLY, AFTER ENSURING THAT THE UNIT IS
DISCONNECTED FROM THE MAINS SUPPLY.
It is recommended that cleaning is carried out regularly
when the glueboard is replaced. Once the glueboard
is removed, the unit should be thoroughly wiped down
with a damp cloth, removing any build up of dirt. Ensure
the unit is completely dry before reconnecting it to the
power supply.
GLUEBOARD REPLACEMENT
GLUEBOARD REPLACEMENT SHOULD BE CARRIED OUT BY
SERVICE PERSONNEL ONLY, AFTER ENSURING THAT THE
UNIT IS DISCONNECTED FROM THE MAINS SUPPLY.
The glueboards should be replaced every month with
genuine Glupac® glueboards. Use of non-approved
glueboards may invalidate your guarantee. Halo Aqua
comes supplied with high efcacy replacement yellow
glueboards, with printed grids for simple insect evaluation
and monitoring.
To replace the
glueboard…
1. Remove
the used
Glupac®
glueboard
by simply pulling it
clear from either the left or
right of the unit.
2. Remove the protective
release paper from
the new Glupac®
glueboard.
3. Slowly slide the new
Glupac®glueboard
into position, until the
glueboard ‘drops’ into
the locator, indicating
it is in the centre of
the unit.
Always ensure the selected genuine
Glupac®glueboards are
compatible with your
unit, available from
your pest control
operator or Pelsis
Ltd.
TUBE REPLACEMENT
TUBE REPLACEMENT
SHOULD BE CARRIED OUT
BY SERVICE PERSONNEL ONLY,
AFTER ENSURING THAT THE UNIT IS
DISCONNECTED FROM THE
MAINS SUPPLY.
To ensure the
efciency of Halo
Aqua in catching
ying insects, the
UV tubes should be
replaced annually. After
twelve months the phosphor
coating that emits the correct
wavelength of UV light has burnt
away and the UV output is
diminished substantially.
To replace the UV tubes…
1. Open the swing down
front guard, by using
the supplied servicing
key fob.
2. Loosen the lampholder cap
slightly, then rotate the lampholder
anti-clockwise.
3. Repeat the process on the opposite lampholder, then
slide them both towards the centre of the tube.
4. Rotate the tube through 90°, freeing it from the tube
holders.
5. Pull the tube away from the chassis.
6. Dispose of the used UV tube in conjunction with local
WEEE regulations.
STARTER REPLACEMENT
STARTER REPLACEMENT SHOULD BE CARRIED OUT BY
SERVICE PERSONNEL ONLY, AFTER ENSURING THAT THE
UNIT IS DISCONNECTED FROM THE MAINS SUPPLY.
The starters provide an extra spark to initially light the UV
tubes. Starters wear out and should be replaced at the
same intervals as the UV tubes.
To replace the starters…
1. Release the starterholder cap by unscrewing it anti-
clockwise.
2. Rotate the starter anti-clockwise.
3. Pull the starter free from the unit.
SPECIFICATION / REPLACEMENT PARTS
Unit Halo 2x45 Aqua
Voltage 230V ~ 50Hz
Dimensions(mm) 588 x 404 x 236
Coverage 240 Sq. Metres
Weight 13Kg
Light Output 90W
Tubes 6 x TPX15-18S
Starter 6 x I154
Glueboards (x6) GB013 (Yellow)
Glueboard Replacement
Starter Replacement
Tube Replacement
English