Pentair INTELLICENTER User manual

IntelliCenter Control System User’s Guide
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INTELLICENTER™CONTROL SYSTEM
USER’S GUIDE
FOR POOL AND SPA
Pool Spa Lights
Air Temp 65° F
Schedule Usage Chemistry Status
3 3
8:00 A.M.
6.50
0
4
84°
78°
Pool Spa Lights
Air Temp 65° F
Schedule Usage Chemistry Status
3 3
8:00 A.M.
6.50
0
4
84°
78°

IntelliCenter Control System User’s Guide

IntelliCenter Control System User’s Guide
P/N 522990.A 3/2018
Overview 1
Features 1
Navigation 2
Home Screen Connection Indicators 4
Initial System Power Up 4
Display Icon (Day/Night Theme) 5
Manual Control of Equipment and
Functions 5
Pool/Spa System Configurations 6
Passcode Protect 6
IntelliCenter Control System Menu
Structure 7
Home Screen 8
Pool 9
Spa 11
Features 13
Features: Individual / Groups 13
Lights 14
Schedule 19
Schedule - Weekly 20
Schedule - Manual Op Priority 21
Schedule - One Time Only 22
Schedule - Offset
Sunrise/Sunset Time 24
Vacation Mode (see page 38) 25
Usage (Summary View) 26
Usage (Summary View Edit) 27
Usage (Graph Screen) 28
Chemistry 29
IntelliChem/IntelliChlor 29
Chemistry (pH Measurement) 29
Chemistry (ORP Measurement) 30
Chemistry (Water Balance) 31
Chemistry (IntelliChlor SCG) 32
Status 33
Settings 35
Service Mode 37
Vacation Mode 38
Support 39
General 40
Location 40
Date & Time 40
Units 41
Features and Lights List Order 41
Backlight 42
Wireless Remote (Deep Sleep) 42
General List Order 42
Temperature Sensor Calibration 43
Day/Night Themes 44
Manual Operation Priority 44
Manual Heat (ON/OFF) 44
Chemistry Readings Badges 44
Show Badge Colors 44
Alerts and Notifications 45
Security (Passcode Protect) 45
Pentair User Portal 47
Groups (Light/Circuits) 48
CUSTOMER SERVICE / TECHNICAL SUPPORT
Contents
Customer Service
8 A.M. to 7.30 P M — Eastern and Pacific Times
Phone: [phone]
Fax: [phone]
Visit www.pentairpool.com
Technical Support
Sanford, North Carolina (8 A.M. to 7.30 P M ET)
Phone: [phone]
Fax: [phone]
Moorpark, California (5 A.M. to 4.30 P.M. PT)
Phone: [phone] (Ext. 5591)
Fax: [phone]

IntelliCenter Control System User’s Guide
Groups (Lights) 50
Groups (Feature Circuits) 51
System Reboot 51
Settings (Advanced System
Configuration) 52
Installation Setup 53
Panel Identification 54
Body Configuration
Pool/Spa 53
Expansion Panels 55
Circuits, Feature Circuits,
Groups 56
Feature Circuits 57
Circuit Functions 60
Circuit Names 61
Pumps 62
Pumps (Single Speed) 62
Pumps (Dual Speed) 63
Pumps (IntelliFlo VS) 64
Pumps (IntelliFlo VSF) 66
Pumps (IntelliFlo VF) 68
IntelliFlo Pump Alarms
and Warnings 69
Heaters (Gas) 72
Heater Installation 72
Solar and Heat Pump
Nocturnal Heater Cool
Down Delay 73
Heater (Solar Heating) 74
Heaters Heat Pump
(UltraTemp/Hybrid) 75
Valves 76
Valves (Installation) 76
Optional Expansion Valve 77
Chemistry
IntelliChlor/IntelliChem 78
IntelliChlor SCG 78
IntelliChem 78
Pool/Spa Cover 79
Remotes Setup 80
iS4 Remote 80
QuickTouch II Remote 81
iS10 Remote 82
SpaCommand Remote 83
Network and WiFi Setup 84
IntelliCenter Wireless
Remote Setup 86
Delays 87
System 88
System Information 88
Detected Hardware 88
System Diagnostic 88
Firmware Update 88
Factory Diagnostics 88
Import/Export 89
Import System Config. 89
Export System Config. 90
Restore Factory Defaults 91
Setup Wizard 92-102
IntelliCenter Control System
Remote Access
Instructions 103
Changing the Antenna
Power 104
IntelliCenter Control System
Wireless Connections
Diagram 105
IntelliCenter Control System
Configurations and Models 106
Glossary 108
Contents

IntelliCenter Control System User’s Guide
Before installing this product,
read and follow all warning
Attention Installer: This Installation and User’s
Guide (“Guide”) contains important information
about the installation, operation and safe use of this
underwater pool and spa light. This Guide should be
given to the owner and/or operator of this equipment.
Attention User: This manual contains important
information that will help you in operating and
maintaining this product. Please retain it for future
reference.
SERIOUS BODILY INJURY OR
DEATH CAN RESULT IF THIS
LIGHT IS NOT INSTALLED AND
USED CORRECTLY.
Before working on the
IntelliCenter Control System
always disconnect power to the pool and/or
spa pumps, lights and other electrical devices
at the house circuit breaker. Failure to do
so could result in death or serious injury to
service person, pool users or others due to
electric shock.
This underwater light must be
installed by a licensed or certified
RISK OF ELECTRICAL SHOCK
OR ELECTROCUTION:
THIS PRODUCT REQUIRES
HIGH VOLTAGE WHICH CAN
SHOCK, BURN, OR CAUSE
DEATH.
Most states and local codes regulate
the construction, installation, and
ATTENTION
ATTENTION
operation of public pools and spas, and the construction
of residential pools and spas. It is important to comply
with these codes, many of which directly regulate the
installation and use of this product. Consult your local
building and health codes for more information.
ANSI - American National Standards Institute
ASME - American Society of Mechanical Engineers
CSA - Canadian Standards Association
IAPMO - International Association of Plumbing and
Mechanical Officials
UL - Underwriter Laboratory
INSTALLERS, POOL OPERA-
TORS AND POOL OWNERS
MUST READ THESE WARNINGS AND ALL
INSTRUCTIONS BEFORE USING THE POOL AND/
OR SPA LED LIGHT.
IMPORTANT NOTICE
notices and instructions in this Guide. Failure to
follow warnings and instructions can result in severe
injury, death, or property damage. Call (800) 831-
7133 for additional free copies of these instructions.
Please refer to www.pentairpool.com for more
information related to this products.
electrician or a qualified pool professional in accordance
with the National Electrical Code (NEC), NFPA 70 or
the Canadian Electrical Code (CEC), CSA C22.1.
All applicable local installation codes and ordinances
must also be adhered to. Improper installation will
create an electrical hazard which could result in
death or serious injury to pool users, installers or
others due to electrical shock, and may also cause
damage to property.
Always disconnect the power to the pool light at
the circuit breaker before servicing the light. Failure
to do so could result in death or serious injury to
serviceman, pool users or others due to electrical shock.
ATTENTION
IMPORTANT WARNING AND SAFETY INSTRUCTIONS

IntelliCenter Control System User’s Guide
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
Regulatory Compliance Information
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. See
instructions if interference to radio or television reception is suspected.
Radio and Television Interference
This computer equipment generates, uses, and can radiate radio-frequency energy. If it is
not installed and used properly—that is, in strict accordance with Pentair instructions—it
may cause interference with radio and television reception. This equipment has been
tested and found to comply
with the limits for a Class B digital device in accordance with the specifications in Part
15 of FCC rules. These specifications are designed to provide reasonable protection
against such interference in a residential installation. However, there is no guarantee
that interference will not occur in a particular installation. You can determine whether
your computer system is causing interference by turning it off. If the interference stops, it
was probably caused by the computer or one of the peripheral devices. If your computer
system does cause interference to radio or television reception, try to correct the
interference by using one or more of the following measures:
• Turn the television or radio antenna until the interference stops.
• Move the computer to one side or the other of the television or radio.
• Move the computer farther away from the television or radio.
• Plug the computer into an outlet that’s on a different circuit from the television or radio.
(Make certain the computer and the television or radio are on circuits controlled by
different circuit breakers or fuses.)
If necessary, consult Pentair Technical Support 1.800.731.3773 or consult an experienced
radio/television technician for additional suggestions. Important:
Changes or modifications to this product not authorized by Pentair could void the EMC
compliance and negate your authority to operate the product. This product was tested for
EMC compliance.

IntelliCenter Control System User’s Guide
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
Wireless Radio Use
This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz
frequency range to reduce the potential for harmful interference to
co-channel Mobile Satellite systems.
Cet appareil doit être utilisé à l’intérieur.
Exposure to Radio Frequency Energy
The radiated output power of this device is well below the FCC radio frequency exposure
limits. However, this device should be operated with a minimum distance of at least
20 cm between its antennas and a person’s body, and the antennas used with this
transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter subject to the conditions
of the FCC Grant.
Industry Canada Statement
Complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique
de la classe B est conforme à la norme NMB-003 du Canada. This device complies with
RSS 210 of Industry Canada.
Disposal and Recycling Information
This symbol indicates that your product must be disposed of properly according
to local laws and regulations. When your product reaches its end of life, contact
Pentair Technical Support 1.800.371.7333 or your local authorities to learn about
recycling options.
California: The coin cell battery in your remote contains perchlorates. Special
handling and disposal may apply.
Refer to www.dtsc.ca.gov/hazardouswaste/perchlorate.
The symbol above means that according to local laws and regulations your product
should be disposed of separately from household waste. When this product
reaches its end of life, take it to a collection point designated by local authorities.
Some collection points accept products for free. The separate collection and
recycling of your product at the time of disposal will help conserve natural
resources and ensure that it is recycled in a manner that protects human health
and the environment.
READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL
SAVE THESE INSTRUCTIONS

IntelliCenter Control System User’s Guide
CUSTOMER SERVICE / TECHNICAL SUPPORT
Customer Service
8 AM to 8 PM — Eastern and Pacific Times
Phone: [phone]
Fax: [phone]
Visit www.pentairpool.com
Technical Support
Sanford, North Carolina (8 AM to 8 PM)
Phone: [phone]
Fax: [phone]
Moorpark, California (5 AM to 5 PM)
Phone: [phone]
Fax: [phone]

IntelliCenter Control System User’s Guide
| 1
Welcome! Your Pentair IntelliCenter™ Control System will change the way you
view pool and spa controls. This innovation in pool and spa automation offers
complete freedom for you while having full automation control over your pool, spa,
lights, heater, cleaners and much more. You can now schedule multiple start and
stop times to control your lights, heater, spa jets, and filter pumps. The historical
usage data feature provides a convenient way to help you conserve energy. Using
an iPhone®, iPad®mobile digital device or an Android®wireless device, you can
now control your pool and spa from anywhere inside or outside your home. The
IntelliCenter Control System is a scalable system that can be used with popular
home automation systems.
This manual describes how use the IntelliCenter Control System and associated
equipment.
IntelliCenter™Control System
Overview
• 4” x 3” capacitive touch sensitive color touch screen.
• Day Time and Night Time color screen modes
• Multifunction Schedules/Programs
• Adjustable schedule timer for easy system scheduling
• 100 Schedules/Programs
• 32 Feature Circuits: Allow additional speeds on a variable speed pump or an
actuator to be assigned without using an existing auxiliary circuit.
• 16 Groups: Assign groups of lighting and AUX circuits that can be controlled by
a single button.
• Supports up to 16 IntelliFlo®VF and VS Pumps
• Supports up to four Spa Command®and iS10 Spa Side Remotes, and two iS4
and one QuickTouch®II Wireless Spa Side Remotes
• Supports IntelliBrite®LED Color lights
• Valves: Intake/Return plus A and B valve circuits. Expandable up to 10 valves.
• Indoor Control Panel, Wireless Hand-Held Remote, Outdoor Control Panel
• IntelliChem®Controller
• IntelliChlor®Salt Chlorine Generator: Supports one unit.
• 40 Auxiliary Circuits (up to three Expansion Enclosures)
• Spa Manual Heat Function
• Support for two Bodies of Water
Features

IntelliCenter Control System User’s Guide
2 |
Navigation
!
Back: Returns to the previous screen. Tap and
hold to return to the Home screen.
Move to next vertical screen (up/down).
Delete an item.
Select and save an item.
Home screen is Locked (passcode protected).
Requires password to access the Home screen.
Edit an item.
Help information. Tap the Help icon to display the
contextual on-screen help information.
Select an item. Add an item. Cancel/Close a screen.
Green: System status is good (OK)
Red: Alert status condition. Note: Badges are displayed
on the Home screen Status icon.
Blue: System Status Information.
Orange: Warning status condition.
• System Reboot from touch screen control panels
• Spa Side Control Enable/Disable
• Solar Heating Option/Support
• 16 Heat Pump Support: RS-485 Support, Heat Pump Cooling Support.
• Safety and Functional Delay(s) and Cancel Systems Delays
• Real Time Clock
• Assignable Circuit Names and Custom Circuit Names
• Special Circuit Functions
• Two Speed Pump Support
• English/Metric Support
• Sensor Calibration
• Passcode Protection
• USB port for use with a standard flash drive. Save the system’s
configuration and upgrade the system’s firmware.
Features (Continued)

IntelliCenter Control System User’s Guide
| 3
84°
78°
84°
78°
84°
78°
Navigation (Continued)
Home Screen Pool and Spa Status Badges: Note: Shared equipment one
badge for each body.
Green Badge. A Green (Schedule) badge displayed on the on the Home
screen Pool/Spa icon indicates that a programmed schedule is active.
Yellow Badge (Pool/Spa filter pump turned on): A Yellow Badge indicates
a delay is in progress. Delays: (Heat Cool-Down (pump), Valve Rotation
Delay, Pump Priming). Note: For Pool and Spa (shared equipment
systems), when the pool or spa pump is turned on, the Yellow badge
displays on the pool or spa icon; not on both at the same time. See page
44 to hide/show Yellow and Blue Badges.
Blue Badge (Pool/Spa pump turned on): A Blue Badge indicates that the
Pool/Spa pump has been turned on.
Using Override Delays (see page 87):
• Go to Delays and tap Override Delays.
• Override Delays will cancel all active delays. If a Schedule is running, a
Green Badge will display. If the pool/spa pump is manually enabled (ON/
OFF), a Blue badge will display.
Features and Light Green Number Badge: Indicates the number of
Features or lights currently activated.
Status Icon Number Badge: Indicates the number of Alerts and Warnings
present in the Status Screen. Items shown in the Status can be selected
from the Alerts & Notifications Screen Note: To select or hide Status
Badge icons, see Settings > Alerts and Notifications, on page 45.
Valve Type
Delay Sengs
Valve Delay
15
Frz Cycle Time (min)
OFF
Heater Cool Down OFF
Override Delays Cancel
30
Spa Frz Override (min)
3
1
°
78 78°°
78 Badge Color Changing Sequence:
The color badges shown on left indicate No heater (Off)
installed.
Yellow changes to Green: A schedule has started running.
Yellow changes to Blue: Pool/Spa pump has been manually
turned ON. Blue will stay on until pool/spa pump is manually
turned off. Note: Blue Badge will stay on for the Egg Timer
duration (12 hrs. default). If the Egg Timer is set to Don't Stop
to circuit will run continuously until manually is switched off.

IntelliCenter Control System User’s Guide
4 |
Home Screen Connection Indicators
Initial System Power Up
After all required pool/spa equipment
has been connected to the IntelliCenter™
Control System, apply power to the
system at the main panel circuit
breaker. Upon the initial system power
up, the Outdoor LCD Control Panel
will display the PENTAIR END USER
LICENSE AGREEMENT. Please read this
agreement. To continue, tap the Down
arrow on the right side of the screen to
scroll down to the end of the agreement and tap I Accept to accept the agreement.
The Home screen is then displayed. See page 94 for Setup Wizard.
I Accept
PENTAIR END USER LICENSE AGREEMENT
IntelliCenter Control System
Setup Wizard and Wireless Remote: Before running the Setup Wizard on the
Wireless Remote, the Wireless Transceiver antenna must be connected to
the IntelliCenter Control System Load Center. For more information, see the
IntelliCenter Installation Guide. For Wireless Remote settings, see page 86.
Setup Wizard and Wireless Network Bridge (www.intellicenter.com): In order
to connect the IntelliCenter Control System to your home network, the Wireless
Network Bridge Antenna must be connected to the IntelliCenter Load Center and
your home network. For more information, see the IntelliCenter Installation Guide.
For Wireless Network Settings, see page 84.
Connection indicators for IntelliCenter™ Outdoor and Indoor Control Panel and
Wireless Remote are displayed on the top right side of the Home screen.
Padlock: Indicates the Home screen is passcode protected. Requires
password to access the Home screen.
Pentair logo: Indicates connection to intellicenter.com server, see
page 84.
Battery Icon: Wireless Remote battery indicator.
Green/Amber/Red Dot: These icons display on the Indoor Control
Panel and Wireless Remote. Green indicates connection to the
Outdoor Control Panel. Amber indicates synchronizing with the
outdoor control panel. Red indicates no connection to the Outdoor
Control Panel.
Ethernet Icon: Ethernet icon indicates an Ethernet connection to the
Outdoor Control Panel.

IntelliCenter Control System User’s Guide
| 5
For optimal screen viewing, the color touch screen contrast can be set for daylight,
or night time viewing.
To change the Day/Night Theme: From the Home screen, tap Settings > General >
Day/Night Themes. Select Day Theme, Night Theme or Transition Type (Manual or
Auto). See page 44.
Home Screen
Home Screen Display Icons and Day/Night Theme
Pool Spa Features Lights
Air Temp 65° F
Schedule Usage Chemistry Status
3 3
8:00 A.M.
6.50
04
84°
78°
Manual Control of Equipment and Functions
The Home screen displays the current pool and spa operating status. The
example below shows IntelliCenter™ Control System model i5PS (pool/spa shared
equipment with heater, see page 72. Tap an icon to access its control screen to
manually control pool and spa equipment. The Home screen displays the installed
equipment as configured from the Settings screen, see page 35.
Change the screen time out delay: If you require the screen to stay on longer and
not turn off while setting up system configurations; from the Home screen, tap
Settings > General > Backlight, and change the Dim Display and Turn Off Display
settings to the desired time in minutes.
Pool
Tap the Pool
to access the
Pool screen:
Turn On/Off
pool filter pump
and heater.
Set pool water
temperature.
Override the
Pool pump
while freeze
protection is
active.
Spa
Tap Spa to
access the Spa
screen: Turn
On/Off Spa
pump and
heater. Set
Spa water
temperature.
Override the
Spa pump
while freeze
protection is
active.
Features
Tap the
Features
icon to access
the Features
screen:
Turn On/Off
Individual or
Groups
circuits (Light
and AUX
circuits ).
Lights
Turn Individual/
Groups of lights
ON/OFF.
Color Lights:
- All ON/OFF
- Color Set/Edit
- Color Sync
- Color Swim/Edit.
IntelliBrite®
Lights:
- Preset shows
- Color presets
MagicStream®
Laminars

IntelliCenter Control System User’s Guide
6 |
Schedule Usage Chemistry Status
31 3
84°78°
Garden
ON
84°78°
Spa
ON
84°78°
Spa
ON
78°
Indoor
OFF
Air Temp 65° F 8:00 A.M.
Systems with multiple pools and/or spas (up to two bodies of water total).
Depending on the Personality Card installed in the IntelliCenter™ Control System
load center (see page 95) a system can be configured as follows:
Single Body (model i5, i8, i10): One set of equipment for a single body of water
(pool or spa).
Shared Equipment (i5PS, i8PS, i10PS): One body of water with shared equipment
(same pump, heater and filter).
Dual Equipment (i10D): Two separate equipment sets for two separate bodies
of water (pool/pool and spa/spa (only one pool or spa icon with draw).
The Home screen displays each additional body of water under the main Pool and
Spa icon. Up to two bodies maximum of water can be displayed.
Pool/Spa System Configurations
Lower Drawers: An i10D model system
can be configured as Pool, Pool or
Spa, Spa. Using the lower draws on/
off button, each body of water can
be turned on or off. Note: The Home
screen shown on the left are passcode
protected, see Passcode Protect below
for more information.
Tap the On/Off slide button icon to
manually control the pool or spa filter
pump and heater for the selected body
of water. Tap the Up/Down arrow to
display more pools and/or spas. The
current settings are displayed above
the pool and spa the icon.
Note: To configure the pool and spa
systems, see Settings > Advanced
System Configuration > Installation
Setup > Body Configuration, see page
53.
Schedule Usage Chemistry Status
31 3
84°78°
Garden
78°
Indoor
Air Temp 65° F 8:00 A.M.
ON OFF
Enter Passcode
2 31
5 64
8 97
0
• • • •
Passcode Protect: When a screen or individual screen item is Passcode protected
a lock icon is displayed. To access the passcode protected screen or item, tap
on the screen icon to display the Passcode four digit screen. Enter the four digit
Passcode. After passcode is entered, the screen can be accessed.
Tap number key pad to enter the four
digit Passcode to access the Passcode
protected screen.
Note: To setup Passcodes, see Settings >
Security on page 45.
Passcode Protect

IntelliCenter Control System User’s Guide
| 7
Home Screen (see page 8)
Pool Screen
Spa Screen
Features (Individual/Groups)
Lights ((Individual/Groups)
Schedule (Pump schedule)
Usage
Chemistry (IntelliChem®Controller/IntelliChlor®SCG)
Status
Settings (see page 35)
Service Mode
Vacation Mode
Support
General: Location, Date & Time, Units (Fahrenheit/Celsius), Features
and Lights List Order, General List Order, Backlight (Deep Sleep: Wireless
Control Panel only, Temperature Sensor Calibration, Day / Night Themes,
Manual Operation Priority, Manual Heat, Chemistry Readings Badge, Badge
Colors.
Alerts and Notifications: Choose which system status, alerts and warnings
badges to display on the Home screen Status icon.
Security (Passcode Protect)
Pentair User Portal (intellicenter.com)
Groups: Configure groups of AUX circuits, Light circuits and Feature circuits.
System Reboot: Reboot the panel
Advanced System Configuration (see page 52)
Installation Setup:
Body Configuration,Circuits, Pumps, Heaters, Valves,
Chemistry, Pool/Spa Cover.
Remotes Setup: iS4, QuickTouch II, iS10, SpaCommand remotes
Network and WiFi Setup: Configure Ethernet, Connect to a Wireless
Network, Adjust Wireless Transmit Power, Internet Connection Test,
Reboot WiFi Device.
IntelliCenter Wireless Remote Setup: Configure the Address and Panel #
for wireless remote.
Delays: Valve Delay, Heater Cool Down, Freeze Cycle Time (min), Spa Freeze
Override (min), Override Delays.
System: System Information, Detected Hardware, System Diagnostic
Information, Firmware Update (Update from Panel, Update from USB,
Update from Ethernet), Factory Diagnostics.
Import/Export: Import System Configuration, Export System Configuration.
Restore Factory Defaults: Restore system to factory configuration.
Setup Wizard: Step-by-step system configuration.
IntelliCenter™ Control System Menu

IntelliCenter Control System User’s Guide
8 |
Home Screen
Schedule: Setup your daily pool/spa operations. "Vacation" is displayed
when the system is in Vacation mode.
Usage: Historical usage data: Keep track of pool/spa equipment
usage data.
Chemistry: Sanitizers: IntelliChem®Controller, IntelliChlor®and iChlor™Salt
Chlorine Generator. To display pH and ORP readings on Home
screen Chemistry Icon, see Settings > General > Chemistry
Readings Badge (Set to ON). See page 45. The IntelliChem
Controller can be configured to be stand-alone or to control an
IntelliChlor/iChlor SCG.
Status: View the current pool/spa status/alerts.
Settings: Setup and configure equipment.
The IntelliCenter™ Control System Outdoor Control Panel Home screen displays
the current ambient air temperature, and the current system time. Green badges
displayed above the Pool and Spa icons show the current water temperature
and heater set point temperature. Green badges displayed above the Features
and Lights icon show the number of active features and lights that have been
manually switched on. The Pentair logo (IntelliCenter.com connection), Ethernet
connection and the optional Wireless Remote signal and battery strength may
also be displayed. The Home screen example below shows an i5PS IntelliCenter
Control System (shared equipment pool and spa with heater). For IntelliCenter
Control System models see page 106. The Home screen is displayed when power
is applied to the IntelliCenter Control Panel load center.
Pool Spa Features Lights
Air Temp 77°F
Schedule Usage Chemistry Status
3
3 3
84°
78°
°
08:00 am
FRZ ON
Schedule
(page 20)
Current ambient air
temperature via air
sensor
Usage
(page 26)
Chemistry
(page 29)
Status/Alerts
(page 33)
Settings (page 35)
(Advanced System
Configuration)
(page 52)
Lights
(page 14)
Features
(page 13)
Pool
(page 9)
Spa
(page 12)
Badge
(page 45)
Vacaon
(page 38)
System time
Freeze Protect Active
(displays on the Home
when feature is enabled) See page 4for icon
descriptions

IntelliCenter Control System User’s Guide
| 9
Pool Pump On/Off Button: Tap this
button to turn the Pool Pump on to
activate the heater. Tap the Heat Mode
button to select a heat source. Note:
When the heater is turned it will
activate the pool/spa pump when the
Heating Set Point is above or at the
current water temperature reading.
Note: The Pool button name can
changed (up to nine characters),
go to Settings > Advanced System
Configuration > Installation Setup > Body
Configuration, see page 55.
Heating Set Point: Use the Up/Down
button to increase or decrease the heat
set point temperature.
Pool Temperature: Displays the
current pool water temperature in
Fahrenheit or Celsius, see page 41.
Pool Spa Features Lights
Air Temp 65° F
Schedule Usage Chemistry Status
3 3
8:00 A.M.
6.50
0
4
84°
78°
Flame: Snow Flake: Sun:
Heat Source Nocturnal Solar
Active Cool Down Heat Source
Select Heat Source for Pool
Off
Heater
Solar Preferred
Solar Only
Heat Pump
Pool Badge Icons: AFlame icon (heat
source active) is displayed with the
current heat set point temperature.
A Snow Flake icon indicates the
UltraTemp Heat Pump or Solar Heat (if
enabled) is in cooling mode. A Sun icon
indicates solar heat is active. Select
the heat source from the Select Heat
Source screen.
Pool
Tap the Home screen Pool icon to display the Pool Pump control settings screen.
From this screen tap the Pool Pump button to activate the pool pump. A Blue badge
displayed on the Pool icon indicates the Pool/Spa pump button has been manual
turned on. The Blue badge displays until the pump button is turned off. The badge
displays the current pool water temperature. If there is a heat source active, a
flame icon is displayed with the pool water set point temperature. Note: For more
information about screen badges, see page 3.
Heat Mode indicators:
Heat Mode Button: Tap the Heat Mode
button to select the heat source type: Off
(no heat source), Heater, Solar Only, Solar
Preferred, Heat Pump, UltraTemp (Hybrid)
or UltraTemp (Hybrid) Preferred. Note: To
add a heater, see page 72.
Pool
Temp 77
Pool
°
Heang
Set Point
78
°
Heater
Heat Mode
Pool
Note: The displayed heat sources are
configured from Settings > Advanced
System Configuration > Installation Setup >
Circuits, see page 56.

IntelliCenter Control System User’s Guide
10 |
Nocturnal Cooling Set Point
Temperature control for Heat Pump
or Solar: If using a heat pump, use the
Cooling Set Point temperature or solar
heat control buttons displayed on the
Pool and/or Spa screen to adjust the
nighttime temperature of the pool/spa
water. See page 74.
Schedules (Heat Source and Set Temperature) See page 20: See Schedules to
schedule the pool/spa pump to turn on at a specific time to pre-heat the pool or
spa water. From the Schedules Weekly or One Time Only option, select Heat Source
and select a heat source, then set the Set Temperature settings.
Note: If the Heat Mode is set to Off, the Heating Set Point setting on the Pool
screen is not displayed. Tap the Heat Mode button to display the Select Heat
Source screen. Note: The Home screen displays a Blue badge over the Pool icon
with the current pool water temperature.
Pool Spa Features Lights
Air Temp 65° F
Schedule Usage Chemistry Status
3 3
8:00 A.M.
6.50
04
78°
Pool
Pool Pump Button (Override Freeze Protect)
Pool
Temp 77
Pool
°F
Heang
Set Point
78
°F
Pool Filter Pump
Heat Pump (77°)
Cooling
Set Point
100
°F
Heat Mode
Solar Heater: Nocturnal (nighttime) feature provides automatic cooling during
night time hours for pools that overheat in hot climates to circulate the warmer
pool water to the collector panels when the collector temperature and the pool
temperature is hotter than the high limit setting. This process cools the pool water
over time. Note: This feature is also used for the UltraTemp heat pump, Hybrid
Heater and a Heat Pump. See page 74.
Pool
Temp 77
Pool
°F
Pool Filter Pump
Off
Heat Mode
Freeze Protection Override: The pool pump can be manually turned on to override
the Freeze protection. This also applies if a schedule is running. To assign freeze
protection to a circuit. See page 59 for more information.
Pool
Temp 40°
Pool (schedule on in freeze)
Pool Pump
Off
Heat Mode
(press manual ON)
Pool
Temp 40°
Pool (manually turned on in freeze)
Pool Pump
Off
Heat Mode
(press manual ON)

IntelliCenter Control System User’s Guide
| 11
Spa
Heang
Set Point
87
°
Spa
Heater
Pool
Temp 77
°
Heat Mode
Select Heat Source for Spa
Off
Heater
Solar Preferred
Solar Only
Heat Pump
Tap the Home screen Spa icon to display the Spa Pump control settings
screen. From this screen tap the Spa Pump button to activate the Spa heat source.
A Blue badge displayed on the Spa icon indicates the Pool/Spa pump button has
been manually turned on. The Blue badge displays until the pump button is turned
off. The badge displays the current pool water temperature. If there is a heat
source active, a flame icon is displayed with the pool water set point temperature
source. Note: For more information about screen badges, see page 3.
Spa
Spa Manual Heat ON/OFF: When set to
ON, overrides current heater settings
and schedules to allow manual control
of the spa heater settings (on/off and
temperature settings), see page 12.
Heat Mode Button: Tap the Heat Mode
button to select the spa heat source
type: Off (no heat source), Heater,
Solar Only, Solar Preferred, Heat Pump
(Heat Pump Preferred) or UltraTemp®
(UltraTemp Preferred). Note: To add a
heater, see page 72. To add a circuit
go to Settings > Advanced System
Configuration > Installation Setup >
Circuits, see page 56.
Select the heat mode from the Select
Heat Mode screen.
Spa Badge Icons: AFlame icon
indicates that the heat source has been
called for. A Snow Flake icon indicates
the UltraTemp (Hybrid) Heat Pump or
Solar Heat (if enabled) is in cooling
mode. A Sun icon indicates solar heat
is active. Select the heat source from
the Select Heat Source screen.
Pool Spa Features Lights
Air Temp 58° F
Schedule Usage Chemistry Status
3 3
11:00 A.M.
6.50
04
94°
98°
Note: The Spa button name can changed
(up to nine characters), go to Settings
> Advanced System Configuration >
Installation Setup > Body Configuration, see
page 55.
Spa Pump On/Off Button: Tap this
button to turn the Spa Pump on to
activate the heater. Tap the Heat Mode
button to select a heat source.
Heating Set Point: Use the Up/Down
button to increase or decrease the heat
set point temperature.
Flame: Snow Flake: Sun:
Heat Source Nocturnal Solar
Active Cool Down Heat Source
Heat Mode indicators:

IntelliCenter Control System User’s Guide
12 |
Spa
Spa Manual Heat ON/OFF: See page 59: If the Heat Enabled (Default ON), feature
is selected and the Spa pump button (or from the Spa-Side remote, or Wireless
Controller) is turned on, the pump will turn on and the heater will begin to heat the spa
(even if the heater is set to OFF). This feature allows you to program the pool pump to
filter daily with the heater set to off, and then be ready to heat whenever the Spa button
is pressed. See Settings > Advanced System Configuration > Installation Setup > Spa
Body Configuration >Spa Settings on page 53.
Schedules (Heat Source and Set Temperature) See page 20: See Schedules
to schedule the pool/spa pump to turn on at a specific time to pre-heat the pool
or spa water. From the Schedules Weekly or One Time Only option, select "Heat
Source" and select a heat source, then set the Set Temperature settings.
Note: The Heating Set Point setting on the Spa screen is not displayed if Off is
selected on the Select Heat Source screen. Tap the Heat Mode button to display
the Select Heat Source screen.
Spa Temperature
87
Spa
°
Spa Pump
Off
Heat Mode
Pool Spa Features Lights
Air Temp 65° F
Schedule Usage Chemistry Status
3 3
8:00 A.M.
6.50
04
78°
Spa Heater Button: Tap to access the
Select Heat Mode screen. Tap the desired
heat source (solar or conventional
heaters). Note: Heat sources are
configured from Settings > Advanced
System Configuration > Installation Setup >
Circuits, see page 56. Also see: Manual
OP Priority: Manual ON/OFF circuit
during a schedule. See page 44.
Spa Pump Button (Override Freeze Protect -See Delay Settings, page 87.)
Spa
Temp 40°
Pool (freeze acve)
Spa Pump
Off
Heat Mode
(press manual ON)
Spa
Temp 40°
Pool (schedule on in freeze)
Spa Pump
Off
Heat Mode
(press manual ON)
Spa
Temp
87
Spa
°
Heang
Set Point
98
°
Spa Filter Pump
Heat Pump (87°)
Cooling
Set Point
100
°
Heat Mode
Spa Freeze Override Time (0-240 min (4 hrs): Override the spa pump circuit that
has freeze protection active to run the pump and heat the spa during freezing
temperatures. This also applies if a schedule is running. Freeze Cycle Time (min):
Set the freeze protection time from 5 to 60 minutes to run the pump during
freezing temperatures. Default time is 5 minutes. See page 87 and 59.