Pentair FLECK 3200 NXT User manual

WARNING:
CONTINUED

In Service
(Primary Tank) Standby
1 2 3 4
In Service
1 2 3 4
Standby
First Trip Point
(Primary Valve)
Total Flow Split
Between Two Meters
Standby
Flow Rate Demand
Below First Trip Point
(Primary Valve)
1 2 3 4
Standby
Flow Split Between
Three Meters
1 2 3 4
Standby
Flow Split Between
Two Meters
1 2 3 4
Full Capacity
4th in Standby
(Primary Valve)
3/4 Capacity
3rd in Standby
1 2 3 4
1/2 Capacity
2nd in Standby
1/4 Capacity
1st in Standby
Full Capacity
4th in Standby
3/4 Capacity
3rd in Standby
1 2 3 4
1/2 Capacity
First Trip Point
Programmed Rate
1/4 Capacity
Ne Primary Tan
System Operation in Regeneration:

In Service In Service
1 2 3 4
Standby Standby
Steady Flow:
Volume
Remaining = 0
Volume
Remaining = 0
Regeneration
(Volume
Remaining = 0)
In Service
(Volume
Remaining = 0)
1 2 3 4
In Service In Service
Flow Increases Past the Trip Point:
Regeneration Standby
1 2 3 4
In Service In Service
Flow Stays Steady:
System
Number
Valve
Address
Valve State
(SBY, SRV, INI, CHG, LCK)
Flow
Indicator
Time
of Day
Shift Button
Adjusts Values to the Left
Up Button
Adjusts Values Up
Down Button
Adjusts Values Do
Volume emainin
Status D
Display Screen
e of Da alteates
th o See
aple Vale , Volue
Rea, os
Dianostic Button
Ve lo Rate, ea lo
Rate, otale, Hous
Betee Last o
Reeeatos, Hous Se
Last Reeeato, Adjustale
Volue Rea, Vale
osto, Sed  Reee
os, Softae Veso
tra ycle Button
Cle Vale 
ReeeatoCle
oa Steps
4 # S R V 0 3 : 4 5 P M
R E G E N I N 0 7 D A Y S
4 # S R V * 0 3 : 4 5 P M
V O L U M E 1 0 0 0 g
5 # 1 S R V * 0 3 : 4 5 P M
V O L U M E 1 0 0 0 g
5 # 3 S R V 0 3 : 4 5 P M
V O L U M E 1 0 0 0 g
6 # 1 S R V * 0 3 : 4 5 P M
S Y S V O L 4 0 0 0 g

Example:
S allons (Default)
VALVE TYPE:
2 7 5 0
Options: 2 (Default)
2
2
31
3
Stager  otch Cam
Example:
2 (Default)
REGEN TYPE:
T I M E C L K D E L A Y E D
Options: Time Clock Delayed (System 4 Only) (Default)
Meter Immediate (All System Types)
Meter Delayed Fixed Reserve (Systems 4   Only)
Example:
Time Clock Delayed (Default)
R E G E N E R A N T F L O W :
D O W N F L O W
Options: Donlo (Default)
p Flo
F Fill First
Example:
Donlo (Default)
REMOTE SIGNAL
S T A R T : 0 0 : 0 6 : 0 0
Options:  (Default)
Range:  second to  mintes ( or  mintes)
NOTE: This display will not be viewed in System 
Example:
 (Default)
(orsMintesSeconds)
NOTE: This seen will not display fo System Type 
S Y S T E M S I Z E :
2 V A L V E S
Options:  alves in te System (Default)
 alves in te System
4 alves in te System
Example:
 alves in te System (Default)
Range:  to 4 alves in te System
NOTE: This seen will not display fo System Type 
D I S P L A Y F O R M A T :
U S - G A L L O N S
Options: S  allons (Default)
 Metric  iters (Metric)
NOTE: n Euopean nits  ites (eti) mode the display will be in
hou time
NOTE: n S  allons mode the display will be in hou time
U N I T C A P A C I T Y :
0 0 0 0 0 0 0 0 G R A I N S
Options: rains (in S Format) (Default)
rams (in Metric Format)
Example:
rains (Default)
NOTE: se the Shift button to move to the left
Range:  to  rain Capacity in S Format
 to  rams CaCO Capacity in Metric Format
Example:
 (Default)
CAPACITY SAFETY
F A C T O R : 0 0 %
Range:  to 
NOTE: se the Shift button to move to the left
F E E D W A T E R
H A R D N E S S : 1 5 G P G
Range:  to  rainsallon (S Format)
 to  milirams CaCO (Metric Format)
Example:
  (S Format) (Default)
NOTE: se the Shift button to move to the left
NOTE: This seen will only display on the lead unit fo System Types   
o all othe System Types it will display fo all units
CAUTION
V A L V E A D D R E S S :
# 2
Options: Valve Address #1 (First Control Valve)
Valve Address #2 (Second Control Valve) (Default)
Valve Address #3 (Third Control Valve)
Valve Address #4 (Fourth Control Valve)
S Y S T E M T Y P E : 4
S I N G L E U N I T
Options: System 4 (single unit)
System  (24 units) arallel nterloc
System  (24 units) arallel Series egeneration
System  (2 units) Alternating
System  (24 units) Alternating
System 14 (24 units) emand ecall
Example:
System Tye 4 Single nit
Example:
Valve Address #2 (Second Control Valve) (Default)
S E L E C T L A N G U A G E :
E N G L I S H
Options: nglish
sanol
ortugues
eutsch
Francais
Example:
nglish
NOTE: This seen will not display fo System Type 

o all othe System Types it will display fo all units
T R I P P O I N T 1 :
0 0 0 g p m
NOTE: Display will not appear unless timer is programmed as valve position
#1. Use the Shift utton to hange eah deimal position.
NOTE: Display will not appear unless timer is programmed as valve position
#1. Use the Shift utton to move one spae to the left.
T R I P D E L A Y 1 :
3 0 S E C O N D S
NOTE: Display will not appear unless timer is programmed as valve position
#1. System size must be 3 or  to appear. se te Sit button to move one
spae to te let.
T R I P P O I N T 2 :
g p m
CONTINUED
R E G E N E R A T I O N D A Y
O V E R R I D E : O F F
Eample:
Off Default
On Default for time lo
R E G E N E R A T I O N D A Y
O V E R R I D E : 0 1 D A Y S
Options: Off Default for meter or On
Eample:
1 Day
ange: 1 to 99 Days
R E G E N E R A T I O N
T I M E : 0 2 : 0 0 A M
Eample:
2:00 A.M. Default
Options: A.M. (U.S. Format)
HR (Metric Format)
NOTE: egeneration time will not appear unless egeneration Day Override
is on.
NOTE: Display will not appear unless timer is programmed as valve position
#1. System size must be 3 or  to appear. se te Sit button to move one
spae to te let.
T R I P D E L A Y 2 :
3 0 S E C O N D S
spae to te let.
NOTE: Display will not appear unless timer is programmed as valve position
#1. System size must be  to appear. se te Sit button to move one
spae to te let.
T R I P P O I N T 3 :
g p m
NOTE: Display will not appear unless timer is programmed as valve position
#1. System size must be  to appear. se te Sit button to move one
spae to te let.
T R I P D E L A Y 3 :
3 0 S E C O N D S