Pentair Hypro 9203 Series User guide

Pentair
375 5th Ave., New Brighton, MN 55112
Phone: [phone] -OR- 800-424-9776 Fax: [phone]
www.hypropumps.com
EU Authorized Representative: QNET BV Hommerterweg 286
6436 AM Amstenrade, The Netherlands
KvK Zuid-Limburg 14091511
EC REP
KEEP FOR FUTURE REFERENCE
Hypro Series 9202, 9203
Form L-1555
Rev. A
Original Instruction Manual
9202C & 9202S; 9203C & 9203S,
9203C-SP & 9203P
Cast Iron, Stainless Steel & Poly Series
Centrifugal Pumps

- 2 -
Contents
EU Language .........................................................................................................................................................................3
Introduction.................................................................................................................................................................4
Description.....................................................................................................................................................4
Intended Uses............................................................................................................................................................4
Purpose of Manual....................................................................................................................................................4
Misuses...........................................................................................................................................................4
 Pump Identication....................................................................................................................................................5
 PumpTechnicalData.................................................................................................................................................5
Fluid PumpingApplication.........................................................................................................................................10
Tools................................................................................................................................................................10
Lifting,Transport,andIntermediateStorage...............................................................................................................10
AssemblyandInstallation........................................................................................................................................................11
Assembly.........................................................................................................................................11
Installation......................................................................................................................................11
Plumbing Diagram.....................................................................................................................................................12
Commissioning, Start-Up, Operation, Shutdown...................................................................................................................14
Information.....................................................................................................................................14
Start-Up, Operation, Shutdown................................................................................................................................14
Maintenance and Servicing..................................................................................................................................................15
 Information............................................................................................................................15
 Disposal.................................................................................................................15
 Cleaning............................................................................................................................15
 Maintenance,RoutineServicing,andInspection.....................................................................................................15
 Troubleshooting.................................................................................................................................15
Replacement Parts...................................................................................................................................................16
Declaration of Incorporation.................................................................................................................................................18
Warranty....................................................................................................................................................................Last Page

- 3 -
EU Languages
DO NOT attempt to install or operate your pump before reading the manual. Original copies of the manual for Hypro
pumpsareprovidedinEnglish.Tondacopyinyournativelanguage,gotowww.hypropumps.com.
Vor dem Ablesen des Handbuches versuchen Sie NICHT, Ihre Pumpe zu installieren. Originale des Handbuches fur
Hypro-PumpenwerdenaufenglischzurVerfugunggestellt.ZueineKopieinIhrerMuttersprachenden,zu
www.hypropumps.com zu gehen (German)
N’essayez pas d’installer votre pompe avant de lire le manuel. Des exemplaires originaux du manuel pour des pompes
de Hypro sont fournis en anglais. Pour trouver une copie dans votre langue maternelle pour aller a
www.hypropumps.com (French)
NON tentare di installare la vostra pompa prima di leggere il manuale. Esemplare originale del manuale per Hypro
pompe sono in inglese. Per trovare una copia nella vostra lingua andare a www.hypropumps.com (Italian)
Непытайтесьустановитьвашнасосдочтенияруководства.Оригинальныекопииэтогоруководствадлянасосы
Hyproнаанглийскомязыке.Найтикопиюнавашроднойязыкперейтикwww.hypropumps.com(Russian)
NO intente instalar su bomba antes de leer el manual. Copias originales del manual para Hypro se provee de bombas
en ingles. Para encontrar una copia en tu idioma nativo ir a www.hypropumps.com (Spanish)
NIEprobowaćinstalowaćpompyprzedjejodczytanieminstrukcji.OryginalnekopieinstrukcjiobsługipompHyprosą
dostarczanewjęzykuangielskim.Abyuzyskaćkopięwtwoimojczystymjęzykuprzejdźdowww.hypropumps.com
(Polish)
Takmayacalışmayınokumadanoncepompanınmanuel.OrijinalkopyalarınıHypropompalarıicinIngilizceolarak
sunulmuştur.Birkopyasınıbulmakicinyereldilgitwww.hypropumps.com(Turkish)
Nao tente instalar a bomba antes de ler o manual. As copias originais dos manuais para Hypro bombas sao
fornecidos em Ingles. Para encontrar uma copia em sua lingua nativa ir para www.hypropumps.com (Portuguese)
VERGEETNIETuwpompvoorhetlezenvanhethandboek.ExemplarenvandehandleidingvoorHypropompenzijn
beschikbaarinhetEngels.Opzoeknaareenexemplaarinuweigentaalganaarwww.hypropumps.com(Dutch)

- 4 -
Introduction
Description
Hyprocentrifugalpumpsaredesignedforcreatingandboostingpressureinuidcircuits.Thepumpoperatesbytaking
inuidfromtheinletportafterwhichitisslungbytheimpellerandexpelledthroughtheoutletport.Constructionfeatures
include housings, impellers and seals which come in a variety of materials in order to be resistant to a range of chemicals.
Standardmodelsofcentrifugalpumpsrotateclockwise,whenlookingatthefrontofthepump.
Intended Uses
Hyprocentrifugalpumpsareintendedforcreatingorboostingdynamicpressureinapproveduids.Hyprocentrifugal
pumps should never be used to pump liquids above 140°F (60°C), or below 34°F (1°C). Any uses outside of those
speciedinthismanualareconsideredmisusesandareprohibited.ContactHyprotechnicalservicewithanyquestions
regardingspecicacceptableuses.
Purpose of Manual
This manual provides instructions and requirements that must be met when installing, using and maintaining the
product(s)identiedonthecover.
If the product is sold, the seller must pass this manual onto the new owner.
The following special attention notices are used to notify and advise the user of this product of procedures that may be
dangerous to the user or result in damage to the product.
ATTENTION
Attention is used to notify of installation, operation, or maintenance information that is important but not safety related.
Thissymbolisusedtodenotethepresenceofanelectricalhazardthatwillresultinpersonalinjury,deathorproperty
damage.
Thissymbolisusedtodenotethepresenceofahazardthatwillresultinpersonalinjury,deathorpropertydamage.
California Proposition 65 Warning --Thisproductandrelatedaccessoriescontainchemicalsknowntothe
State of California to cause cancer, birth defects or other reproductive harm.
Misuses
Hyprocentrifugalpumpsaredesignedtooperateeffectivelywithinthespeciedspeed,pressureandenvironmental
ranges.Goingoutsideoftheserangeswillvoidthewarrantyandcouldcausedamagetopropertyorseriousinjuryor
death.
• DO NOT runthepumpfasterthanthemaximumspeciedspeed.
• DO NOTrunthepumphigherthanthemaximumspeciedpressure.
• DO NOT run pumps when the liquid has exceeded the maximum or minimum temperature limit (see Intended Uses).
• DO NOT pump non-approved liquids.
• DO NOT pump water or other liquids for human consumption.
• DO NOToperateanypumpundertheinuenceofdrugsoralcohol.
• DO NOT run the pump dry.

- 5 -
Pump Identication
Hypro uses serialized labeling to enable users to precisely identify the pump’s manufacturing date.
Serial Number:
First and second digits: year (14 = 2014)
Third through fth digits: consecutive day of the year the pump was manufactured.
Sixth through tenth digits: unique pump serial number.
Pump Technical Data
(Allspecicationsandperformancedataarebasedonwaterasacarrieruid)
9202C
Pump Dimensions
Dim. Inch mm
All
Models
A8.25 209.6
B 7.59 192.8
C 4.00 101.6
D 3.69 93.7
E 3.06 77.7
9202C F 9.01 228.9
9202S F 8.96 227.6
All
Models
G 4.38 111.3
H1.50 38.1
I 3.00 76.2
Pump PTO or Shaft
Output
Max Flow
Rate (GPM)
[LPM]
Max
Pressure (PSI)
[BAR]
Max RPM Ports Dry Weight Mounting
Bolts
9202C 5/8”Solid
Shaft
103 [389.9] 170 [11.7] 6000
1-1/4”NPT
Inlet
1”NPTOutlet
18lbs
[8.2kg] 3/8"ORM10
9202S
5/8”Solid
Stainless
Shaft

- 6 -
9203S
Pump Dimensions
Dim. Inch mm
A8.25 209.6
B 7.59 192.8
C 4.00 101.6
D 3.69 93.7
E 3.06 77.7
F 9.01 228.9
G 4.38 111.3
H1.50 38.1
I 3.00 76.2
Pump Dimensions
Dim. Inch mm
A 8.31 211.1
B8.19 208.0
C 4.60 116.8
D 3.70 94.0
E 3.06 77.7
F 9.80 248.9
G5.16 131.1
H1.50 38.1
I 3.00 76.2
Pump Dimensions
Dim. Inch mm
A 8.31 211.1
B7.66 194.6
C 4.06 103.1
D 3.69 93.7
E 3.13 79.5
F 8.96 227.6
G 4.32 109.7
H1.50 38.1
I 3.00 76.2
9203C-U 9203S-U
9203C-R 9203S-R

- 7 -
Pump PTO or Shaft
Output
Max Flow
Rate (GPM)
[LPM]
Max Pressure
(PSI)
[BAR]
Max RPM Ports Dry Weight Mounting
Bolts
9203C 5/8”Solid
Shaft
140[530] 170 [11.7] 6000
1-1/2”NPT
Inlet
1-1/4”NPT
Outlet
19lbs
[8.6kg] 3/8”ORM10
9203C-R
9203S 5/8”Solid
Stainless
Shaft
9203S-U
9203S-R
Pump Dimensions
Dim. Inch mm
A11.56 293.6
B8.12 206.2
C4.54 115.3
D 9.19 233.4
E 0.88 22.4
F 10.36 263.1
G5.72 145.3
H1.50 38.1
I 3.00 76.2
Pump Dimensions
Dim. Inch mm
A11.56 293.6
B8.12 206.2
C4.54 115.3
D 9.19 233.4
E 0.88 22.4
F 10.36 263.1
G5.72 145.3
H1.50 38.1
I 3.00 76.2
9203C-SP 9203S-SP
9203C-R-SP 9203S-R-SP

- 8 -
Pump PTO or Shaft
Output
Max Flow
Rate (GPM)
[LPM]
Max Pressure
Rate (PSI)
[BAR]
Max RPM Ports Dry Weight Mounting
Bolts
9203S-SP 5/8”Solid
Stainless Shaft 120[454.2] 157[10.8] 6000
1-1/2”NPTInlet
1-1/4”NPTOutlet 38lbs[17.3kg] 3/8”ORM10
9203C-SP 5/8”SolidShaft
9203C-R-SP 140[530] 155[10.7] 2”NPTx2”NPT

- 9 -
Pump Technical Data
(Allspecicationsandperformancedataarebasedonwaterasacarrieruid)
9203P-S
Pump Dimensions
Dim. Inch mm
A 8.31 211.1
B8.38 212.9
C 4.19 106.4
D 4.00 101.6
E 3.06 77.7
F9.45 240.0
F4.75 120.7
G1.50 38.1
H 3.00 76.2
I 3.00 76.2
Pump
PTO or Shaft
Output
Max Flow
Rate (GPM)
[LPM]
Max
Pressure
(PSI)
[BAR]
Max RPM Ports Dry Weight Mounting
Bolts
9203P-S
7/8”Solid
Shaft 100[378.5] 82[5.7] 4200
1-1/2”NPT
Inlet
1-1/4”NPT
Outlet
14lbs
[6.4kg] 3/8"ORM10
9203P-R &
9203P-R-B
9213P
Shaft Driver
3/4”
Hollow Keyed
Stainless
Steel Shafts
91[344.5] 65[4.5] 3600
1-1/2”NPT
Inlet
1-1/4”NPT
Outlet
19 lbs
[8.6kg] 3/8"ORM10

- 10 -
Fluid Pumping Applications
Application
Pump Materials Compatibility
Impeller Pump Housing Seal
Nylon Polypropylene
GTX
(Only
9203)
Stainless Cast
Iron Polypropylene Ceramic Silicon Carbide
Weed Control Chemicals X X X X X X X X
Insect Control X X X X X X X X
BrushControl X X X X X X X X
Pest Control Chemicals
and Fumigants X X X X X X X X
Liquid Fertilizers X X X X X X X
Powdered Fertilizers X X X X X X X X
Fluid Transfer X X X X X X X X
Acids X X X X
Table 1
Flammable liquids, sewage, and potable water should never be put through any Hypro pump.
Tools
The Hypro centrifugal pumps and mounting assemblies are designed with Imperial (inch) bolts, however, there are many
metric(mm)sizeswhichwillworkwiththesemounts.Inmostcasesanadjustablespannerwrenchcanalsobeused.
Lifting, Transport, and Intermediate Storage
Packaging Descriptions and Unpacking Instructions
• Hypro centrifugal pumps are shipped in cardboard boxes for safe transporting.
• When pumps are shipped in large quantities they may be put on a pallet to allow for easy storage, lifting and handling.
• Beforeliftinganypumporpalletdeterminetheweightoftheitembylookingattheattachedpackingslipstoestablish
what lifting equipment should be used.
• Beforeinstallingthepumpdetermineifallthecomponentsarepresentandundamaged.Ifthepumpismissing
components contact customer service immediately.
• Oncethepumpisunpackeddisposeofthepackaginginamannercompliantwithlocalandnationalregulations.
Lifting Instructions
• BeforeattemptingtoliftaHypropumpensurethatthesurroundingworkingareaisfreeofhazardswhichcouldcause
injuryordamagetoproperty.
• Duringliftingoperationsanypersonnelnotinvolvedintheliftshouldnotentertheworkingarea.
• Ifliftinghooks,ropeorchainsarebeingusedforalifttheymustbefreeofdamageandberatedtocarry150%ofthe
weight of the load to be lifted.
• Always wear steel toed shoes and cut resistant gloves when attempting to lift.
• Whenliftingandcarryingalwayskeepthepumpclosetoyourbody.(SeeFigure1)
• Whenstartingtheliftbendyourkneesandkeepyourbackstraight.(SeeFigure1)Tighteningthestomachmuscles
willhelpkeepyourbackstraight.
• Duringtheliftuseyourlegstodotheworkneveruseyoubackandmakesureyourlegsareatleastshoulderwidth
apart. (See Figure 1)