Perfect Prime TM118 User manual

Wall-Mounted Thermometer
Instruction Manual

Contents
P. 1
1. INTRODUCTION
2. SAFETY INFORMATION
3. PRODUCT STRUCTURE
4. BATTERY INSTALLATION
5. SETTING MODE
6. PROPER USE OF THE UNIT
7. EXCEPTIONAL SITUATION
8. CARE AND MAINTENANCE
9. SPECIFICATION
10. WARRANTY INFORMATION
................................................................... 2
.................................................... 3 - 5
.................................................... 6 - 7
....................................................... 8
.................................................................... 9
............................................. 10 - 13
................................................... 14
.................................................. 15
........................................................... 16 - 17
................................................ 18

1. INTRODUCTION
P. 2
• Your new alarm uses advanced infrared (IR) technology to measure
temperature instantly and accurately on the forehead or hand.
• Easy to use and less measurement time
This alarm does not need body contact to ensure safety and
hygiene. Its ergonomic design makes this thermometer simple and
very easy to check the temperature. It only takes 1 second to take
measurement and reading.
• Body modes
This alarm supports to measure temperature of body. Measuring
range of body mode is 32.0°C to 43.0°C(89.6°F~109.4°F).
• Color visible indication of alarm and alarm sounds
When body temperature is over 37.5°C, color indicator will show red
color and an alarm sounds for 10 times
• Measurement
Measurement time interval in 1 second and the measurement
distance is within 1~10cm.
Please read the manual carefully before you use the unit, and keep
for future reference.
• Intended use
The alarm is intended for intermittent measurement and
monitoring of human body temperature from the forehead. The
device is indicated for people of all ages and suitable for public
places, such as schools, shopping malls, oce buildings and other
places.

2. SAFETY INFORMATION
P. 3
This thermometer is not intended to substitute for a consulta-
tion with your physician. The forehead scan temperature serves
as a reference only. It cannot be adjudged for a fever.
Basic safety precautions should always be observed, especially
when the thermometer is used on or near children and disabled
persons.
Please place the device unreachable by young children.
Avoid direct sunlight.
Do not touch the lens.
No modication of this device is allowed.
The swallowing of small parts like packing bag, battery, battery
cover and so on may cause suocation.
Please do not use a dilution agent, alcohol or petrol to clean the
unit.
Please treat it gently and prevent the falling from a high place.
Please do not immerse it in liquid.
Never leave battery in the battery compartment for a long time
without use, as they may leak and cause damage to the unit.
Please take o the battery if you do not intend to use within 3
months.
Replace with new batteries if the unit display a low battery
symbol.
Do not mix the old and new batteries together.
Do not use during the transportation.

2. SAFETY INFORMATION
P. 4
To ensure the correct use of the product, basic safety measures
should always be followed including the warning and the caution
symbols listed in the instruction manual:
The following symbols may appear in this manual, on the label. on the
device, or on its accessories. Some of the symbols represent standards and
compliances associated with the device and its use.
WARNING: This alert identies hazards that may cause serious
personal injury or death.
CAUTION: This alert identies hazards that may cause minor
personal injury, product damage, or property damage.
CAUTION:Consult accompanying documents
DISPOSAL: Do not dispose this product as unsorted
municipal waste Collection of such waste separately for
special treatment is necessary.
Type BF applied part
Manufacturer
Species serial number
Direct current
Follow instructions for use
Authorized Representative in the European Community
CE Mark: conforms to essential requirements of the EMC
Directive - 2014/30/EU.
Symbol descriptions

WARNING
CLASSIFICATION
Do not dispose of electrical appliances as unsorted municipal waste,
use separate collection facilities. Contact your local government for
information regarding the collection systems available. If electrical
appliances are disposed of in landlls or dumps,hazardous
substances can leak into the groundwater and get into the food
chain, damaging your health and well-being
1. Internally powered equipment;
2. Type BF applied part;
3. Protection against ingress of water or particulate matter: IP21;
4. Not category AP/APG equipment;
5. Mode of operation: Continuous operation;
The user must check that the equipment functions
safely and ensure that it is in proper working condition
before it being used.
P.5
2. SAFETY INFORMATION

3. PRODUCT STRUCTURE
P. 6
Infrared indicator
Auto-sense Probe
Measurement indicator
Display Screen
START/STOP Button
Battery Cover
Temperature Unit Switch
Type-C
Hanging Hole
Double-sided Tape
2
3
4
5
6
7
8
9
1
10
BODY
1
2
3
4
5
9
6
10
78

3. PRODUCT STRUCTURE
P. 7
DISPLAY
1
2
3
4
5
Temperature reading
LED Indicator
Celsius/°C
Fahrenheit/°F
Low battery indicator
2
3
4
5
1

LOW BATTERY AND REPLACEMENT
4. BATTERY INSTALLATION
Remove the battery cover from the battery compartment, insert the
battery
When power on, the low battery symbol will display once the
unit start to work, please connect the charger to charge. otherwise
the unit can not work.
BATTERY TYPE AND REPLACEMENT
Do not use the battery beyond their expiry date.
Please remove the battery if you do not need to use for long time.
P. 8
1. Remove the battery cover from the
battery compartment as the arrow
direction accordingly.
2. Insert 1pc 3.7V 18650 lithium battery,
and ensure the battery is in the proper
direction. Positive(+) and Negative(-) are
displayed on the back of battery cover.
3. Close the battery cover.
Dispose the battery in accordance with all federal, state and local
laws. To avoid re and explosion hazard, do not burn or inciner-
ate the battery.
WARNING

5. SETTING MODE
P. 9
UNIT SETTING
There is a small hole on the bottom of the device. You can use a 2mm
diameter screwdriver to insert the hole and then press the button.
Temperature unit: Press mode switch hole then select ℃or ℉.
Celsius/ Fahrenheit/℉