PerfecTron SK513 User manual

Version
1.2
SK513
COM Express® Type 6 Carroer Board +
MXM Graphics System + PCIe/104
www.perfectron.com

www.perfectron.com
1
Safety Information
Electrical safety
 To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before
relocating the system.
 When adding or removing devices to or from the system, ensure that the power cables for the
devices are unplugged before the signal cables are connected. If possible, disconnect all power
cables from the existing system before you add a device.

Before connecting or removing signal cables from the motherboard, ensure that all power cables
are unplugged.

Seek professional assistance before using an adapter or extension cord. These devices could
interrupt the grounding circuit.
 Make sure that your power supply is set to the correct voltage in your area.
 If you are not sure about the voltage of the electrical outlet you are using, contact your local
power company.
 If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your local distributor.
Operation safety
 Before installing the motherboard and adding devices on it, carefully read all the manuals that
came with the package.

Before using the product, make sure all cables are correctly connected and the power cables are
not damaged. If you detect any damage, contact your dealer immediately.

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets
and circuitry.
 Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it
may become wet.
 Place the product on a stable surface.
 If you encounter any technical problems with the product, contact your local distributor
Statement
 All rights reserved. No part of this publication may be reproduced in any form or by any means,
without prior written permission from the publisher.
 All trademarks are the properties of the respective owners.
 All product specifications are subject to change without prior notice

www.perfectron.com
2
Revision History
Revision
Date (
yyyy/mm/
dd
)
Changes
V1.0 2019.10.01 Initial Release
V1.1 2022.03.01 Add Standard Compliance、OS
V1.2 2022.03.14 1.Modify COM ExpressCPU Options(Type 6/7)
2.Modify GPU Module Options

www.perfectron.com
3
Table of Contents
Safety Information ..................................................................................................................................... 1
Electrical safety...................................................................................................................................... 1
Operation safety .................................................................................................................................... 1
Statement ................................................................................................................................................. 1
Revision History ....................................................................................................................................... 1
Packing list ................................................................................................................................................. 1
Ordering Information ................................................................................................................ 1
Chapter 1: Product Information ......................................................................................................... 5
1.1 Key Features ..................................................................................................................................... 5
1.2 Block Diagram .................................................................................................................................. 7
1.3 GPU Options ..................................................................................................................................... 8
1.4 Connector & Pin Header ................................................................................................................ 9
Chapter 2: Jumpers and Connectors ............................................................................................ 11
2.1 Connector & Pin Definitions ....................................................................................................... 11
COM1 .......................................................................................................................... 11
COM12,CN13(Mic-in / Line-out) ....................................................................................... 11
DP1,DP2(Display Port) .................................................................................................. 11
CN17,CN23(USB3.0) ..................................................................................................... 11
CN25(LAN1,LAN2) ........................................................................................................ 12
JP7(COM1 Pin9 Select) .................................................................................................. 12
JP8,JP9(COM1 Mode Select) .......................................................................................... 12
JP10(Enable COM1 RS-485/422 Receiver Termination) ........................................................... 12
J22,J25(FAN Connector) ................................................................................. 13
J23 (Front Panel)…....................................................................................................... 13
CN1,CN2 (COM Express Connector)…. ........................................................................... 13
CN15: M_PCIe2 (Mini PCIe Slot)…. ................................................................................. 13
JP6 (Mini PCIe Function Select)…. ................................................................................. 14
J20 (MXM_VGA)…. ....................................................................................................... 14
JP30 (MXM Type Select)…. ............................................................................................ 14
MXM1(MXM Socket)…. .................................................................................................. 14
CN21 (MXM DC-IN)…. ................................................................................................... 14
JP28 (Clear CMOS)…. ................................................................................................... 15

www.perfectron.com
4
DC-IN(System DC-IN)…. ................................................................................................ 15
J18: MXM_DP(C/D)…. ................................................................................................... 15
J17: MXM_DP(A/B)…. ................................................................................................... 15
J10 (LVDS)…. .............................................................................................................. 16
SIM_CARD1…. ............................................................................................................ 16
J15: USB2.0(USB4/USB5)…. .......................................................................................... 16
J8 (VGA)…. ................................................................................................................. 16
J9 (DIO)…. .................................................................................................................. 17
J11 (LVDS Backlight)…. ................................................................................................ 17
JP23 (LVDS Backlight Power Select)…. ........................................................................... 17
J24 (LVDS Signal Power Select)…. ................................................................................. 17
No31: LPC/COM2/3/4…. ................................................................................................ 18
J4 (LPC)…. .................................................................................................................. 18
J5: COM2 / J6: COM3 / J13: COM4…. .............................................................................. 18
JP12, JP13(COM2 Mode Select)…. ................................................................................. 19
JP14(Enable COM2 RS-485/422 Receiver Termination)…. .................................................. 19
JP11(COM2 Pin9 Select)…. ............................................................................................ 19
JP16,JP17(COM3 Mode Select)…. .................................................................................. 19
JP18(Enable COM3 RS-485/422 Receiver Termination)…. .................................................. 19
JP15(COM3 Pin9 Select)…. ........................................................................................... 19
JP20,JP21(COM4 Mode Select)…. .................................................................................. 20
JP22(Enable COM4 RS-485-422 Receiver Termination)…. .................................................. 20
JP19(COM4 Pin9 Select)…. ........................................................................................... 20
CN26,CN27(SATA)…. .................................................................................................... 20
J2, J3 (SATA Power)…. ................................................................................................. 20
CN14: M_PCIe1(Mini PCIe Slot)…. .................................................................................. 20
CN3: M.2(2280 M-key, SATA Only)…. ............................................................................... 21
CN36(Stack PC1)…....................................................................................................... 21

www.perfectron.com
5
Chapter 1 : Product Introduction
1.1 Specifications
System
COM Express
CPU Options
(Type 6)
Intel® Core™ i7-12800HE 45W Alder Lake 12th Gen, 14C , Freq. 3.5 /4.6 GHz,
24MB cache
Intel® Core™ i7-11850HE 45W Tiger Lake 11th Gen, 8C , Freq. 2.6 /4.7 GHz,
24MB cache
Intel® Xeon® W-11865MLE 45W Coffee Lake 11th Gen, 8C , Freq. 1.5 /4.5 GHz,
12MB cache
Intel® Xeon® E-2276ME 45W Coffee Lake 9th Gen, 6C , Freq. 2.8 /4.5 GHz,
12MB cache
Intel® Xeon® E-2276ML 25W Coffee Lake 9th Gen, 6C , Freq. 2.0 / 4.2 GHz,
12MB cache
Intel® Core™ i7-9850HE 45W Coffee Lake 9th Gen, 6C, Freq. 2.7 / 4.4 GHz,
9MB cache
Intel® Core™ i7-9850HL 25W Coffee Lake 9th Gen, 6C, Freq. 1.9 / 4.1 GHz,
9MB cache
Intel® Core™ i7-7820EQ 45W Kaby Lake 7th Gen, 4C, Freq. 3.0 / 3.7 GHz,
8MB cache
Intel® Xeon® E3-1505L v6 25W Sky Lake 6th Gen, 4C, Freq. 2.2 / 3.0 GHz,
8MB cache
COM Express
CPU Options
(Type 7)
Intel®Xeon®-D1577 45W Broadwell-DE, 16C, Freq. 1.3 / 2.1 GHz, 24MB cache
Intel®Xeon®-D1559 45W Broadwell-DE, 16C, Freq. 1.5 / 2.1 GHz, 18MB cache
(eTEMP)
GPU Module
Options
NVIDIA® GeForce™ GTX 1050Ti, 60W, 4GB GDDR5, 768 CUDA Cores
NVIDIA® GeForce™ RTX 2060S, 175W, 8GB GDDR6, 2176 CUDA Cores
NVIDIA® Quadro™ RTX 5000, 150W, 16GB GDDR6, 3072 CUDA Cores
NVIDIA® Quadro™ RTX 3000, 80W, 6GB GDDR6,1920 CUDA Cores
COM Express
Compatibility COM Express® Type 6/7
Expansion
MiniPCIe Expansion 2 x Full-size mini PCIe (1 with mSATA supported)
M.2 Expansion 1 x 2280 M-key (SATA only)
PCIe/104 Expansion
4 x PCIe x 1、1 x PCIe x 4、5 x USB 2.0、1 x LPC、1 x SPI
SATAIII 2 x SATAIII
Display
Display Port 2 x Display Port outputs from COM Express®, 4 x outputs from GPU,6 total
VGA 1 x output from COM Express®, 1 x output from GPU
LVDS 1 x dual channel 18/24bit LVDS
DVI 1

www.perfectron.com
6
Ethernet
Gigabit Ethernet 2 x 10/100/1000 Ethernet Ports
I/O
USB 4 x USB 3.0, 2 x USB 2.0
COM Port 4 x RS232/422/485
Audio 1 x Line-out, 1 x Mic-In
Power System
Input Power_SYS 9~36V (4P Terminal Block)
Input Power_MXM 12V (ATX 4P)
Power
Consumption Varies per COM Express /MXM with different CPU and GPU models
RTC Battery 3V CR2032
Mechanical and Environmental
Dimension 190mm x 185mm
Operation
Temperture -40 to 85°C
Storage
Temperture -40 to 85°C
Relative Humidity 10% to 90%, non-condensing
Standard Compliance
Standart
Compliance CE / FCC
OS
OS Support Windows®10 64bit
Linux(Support by request)
*All specifications and photos are subject to change without notice.

www.perfectron.com
7
1.2 Board Placement

www.perfectron.com
8
1.3 GPU Options
The SK513 has multiple GPUs available. These have different specifications, as detailed below:

www.perfectron.com
9
1.4 Connector & Pin Header

www.perfectron.com
10
1 COM1
2 CN12 (MIC-In), CN13 (LINE-Out)
3 DP1, DP2
4
CN17,
CN23
(USB3.0)
5 CN25 (LAN1, LAN2)
6 JP7
7 JP8,JP9,JP10
8 J22
9 J23
10 CN1, CN2 (COM Express connector)
11
CN15
(miniPCIe)
12 JP6
13 J20
14 JP30
15 MXM1
16 J25
17 CN21
18 JBAT1
19 JP28
20 DCIN
21 J10
22
SIM_CARD1
23 J15
24 J18 (DPC/D)
25 J17 (DPA/B)
26 J9
27 J8
28 J11
29 JP23, JP24
30 See page 8~9
31 CN26, CN27
32
J2,
J3
33 CN14
34 CN3
35 STACKPC1

www.perfectron.com
11
Chapter 2 : Jumpers and Connectors
2.1 Connector & Pin Definitions
COM1
Pin
RS
-
232
RS
-
422
RS
-
485
1
DCD
-
TX
-
NC
2 RXD TX+ NC
3
TXD
RX+
DATA+
4
DTR
-
RX
-
DATA
-
5
GND
GND
GND
6 DSR- NC NC
7
RTS
-
NC
NC
8
CTS
-
NC
NC
9
RI
NC
NC
CN12,CN13: MIC-IN,LINE-OUT
Definition
CN12
MIC-IN
CN13 LINE-OUT
DP1, DP2: Display Port
CN17, CN23: 4 x USB 3.0 Port

www.perfectron.com
12
CN25: LAN1, LAN2
JP7: COM1 Pin9 select
Pin
Function
(1-2) Closed RI
(3-4) Closed +5V
(5-6) Closed +12V
JP8, JP9: COM1 Mode select
JP8 JP9 Mode
(2-3) (2-3) RS232
(1-2) (2-3) RS485 Half Duplex
(1-2) (1-2) RS485/422 Full Duplex
JP10: Enable COM1 RS-485/422 Receiver Termination
Pin Function
(1-2) Closed High
(2-3) Closed Low

www.perfectron.com
13
J22: CPU FAN Connector
Pin Function
1 GND
2 CPUFANOUT
3 +12V
J25: MXM FAN connector
Pin Function
1 GND
2
3 +12V
J23: Front Panel
Pin
Function
1 HDLED+
2 PWLED+
3 HDLED-
4 GND
5 GND
6 PWRBTN#
7 RESET
8 GND
9 NC
CN1,CN2: COM Express Connector
Support COM Express Basic Size Type 6 Module
CN15: M_PCIE2 (mini PCIe Slot)

www.perfectron.com
14
JP6: mini PCIe1 function select
PCIex1 SATA
(1-2) Closed (2-3) Closed
J20: MXM_VGA
Pin Function
1 MVGA_VS
2 MVGA_SCL
3 MVGA_HS
4 MVGA_SDA
5 GND
6 MVGA_VCC
7 MVGA_R
8 MVGA_B
9 MVGA_G
JP30: MXM Type select
Pin
Function
(1-2) Closed MXM v3.0
(2-3) Closed MXM v3.1
MXM1: MXM socket
CN21: MXM DC-IN
Pin Definition
1 12V
2 12V
3 GND
4
GND

www.perfectron.com
15
JP28: Clear CMOS
Pin
Function
(1-2) Closed Normal(default)
(3-4) Closed Clear CMOS
DCIN: System DC-IN
Pin Definition
1 12V
2 12V
3 GND
4
GND
J18: MXM_DP(C/D)
Pin Function Pin Function Pin Function Pin Function
1 GND 11 DPC_TN1 21 DPC_TP3 31 DPC_AUXP_CLK
2
GND
12
DPD_TN1
22
DPD_TP3
32
DPD_AUXP_CLK
3 DPC_TP0 13 GND 23 DPC_TN3 33 DPC_AUXN_DAT
4 DPD_TP0 14 GND 24 DPD_TN3 34 DPD_AUXN_DAT
5
DPC_TN0
15
DPC_TP2
25
GND
35
GND
6
DPD_TN0
16
DPD_TP2
26
GND
36
GND
7 GND 17 DPC_TN2 27 DPC_AUX_SEL 37 DPC_DET
8 GND 18 DPD_TN2 28 DPD_AUX_SEL 38 DPD_DET
9 DPC_TP1 19 GND 29 GND 39 DPC_PWR
10 DPD_TP1 20 GND 30 GND 40 DPD_PWR
J17: MXM_DP(A/B)
Pin
Function Pin Function Pin Function Pin Function
1 GND 11 DPA_TN1 21 DPA_TP3 31 DPA_AUXP_CLK
2
GND
12
DPB_TN1
22
DPB_TP3
32
DPB_AUXP_CLK
3
DPA_TP0
13
GND
23
DPA_TN3
33
DPA_AUXN_DAT
4 DPB_TP0 14 GND 24 DPB_TN3 34 DPB_AUXN_DAT
5 DPA_TN0 15 DPA_TP2 25 GND 35 GND
6 DPB_TN0 16 DPB_TP2 26 GND 36 GND
7 GND 17 DPA_TN2 27 DPA_AUX_SEL 37 DPA_DET
8
GND
18
DPB_TN2
28
DPB_AUX_SEL
38
DPB_DET
9 DPA_TP1 19 GND 29 GND 39 DPA_PWR
10 DPB_TP1 20 GND 30 GND 40 DPB_PWR

www.perfectron.com
16
J10: LVDS
Pin Function Pin Function Pin Function
1
LVDSB_CLK+
11
LVDSB2+
21
LVDSB0
-
2 GND 12 LVDSA_CLK- 22 LVDSA1-
3 LVDSB_CLK 13 LVDSB2- 23 GND
4
LVDSA3+
14
GND
24
LVDSA0+
5 GND 15 LVDSB1+ 25 LVDS_SCLK
6 LVDSA3- 16 LVDSA2+ 26 LVDSA0-
7
LVDSB3+
17
LVDSB1
-
27
LVDS_SDATA
8 GND 18 LVDSA2- 28 GND
9 LVDSB3- 19 LVDSB0+ 29 LVDS_VCC
10
LVDSA_CLK+
20
LVDSA1+
30
LVDS_VCC
SIM_CARD1
Pin Function Pin Function
1 UIM_PWR 4 GND
2 UIM_RESET 5 UIM_VPP
3 UIM_CLK_R 6 UIM_DATA
J15: USB2.0 (USB4/USB5)
Pin
Function
Pin
Function
1 5V_USB4 6 5V_USB5
2 USB2_DN4 7 USB2_DN5
3 USB2_DP4 8 USB2_DP5
4 GND 9 GND
5 GND 10 GND
J8: VGA
Pin Function
1
VGA_VS
2
VGA_SCL
3 VGA_HS
4 VGA_SDA
5
GND
6 VGA_VCC
7 VGA_R
8 VGA_B
9
VGA_G

www.perfectron.com
17
J9: DIO
Pin Function
1 GPI0
2 GPO0
3 GPI1
4 GPO1
5 GPI2
6 GPO2
7 GPI3
8 GPO3
9 5V
10 GND
J11: LVDS Backlight
Pin
Function
1
BKL_VOL
2 LBKLT_CTRL
3 GND
4 GND
5
Backlight_EN
JP23: LVDS Backlight Power select
Pin
Function
(1-2) Closed 5V
(2-3) Closed 12V
JP24: LVDS Signal Power select
Pin
Function
(1-2) Closed 5V
(2-3) Closed 3.3V

www.perfectron.com
18
No31: LPC/COM2/3/4
J4: LPC
Pin Function
1 GND
2 GND
3
3V3
4 LPC_AD0
5
LPC_AD1
6 LPC_AD2
7 LPC_AD3
8 LPC_FRAME-
9 LPC_RST#
10
CLK_DBG
J5: COM2 / J6: COM3 / J13: COM4
Pin RS232 RS422 RS485
1 5V NC NC
2 GND GND GND
3
COM_P9
NC
NC
4 DTR- RX- Data-
5 CTS- NC NC
6
TXD
RX+
Data+
7 RTS- NC NC
8 RXD TX+ NC
9 DSR- NC NC
10 DCD- TX- NC

www.perfectron.com
19
JP12, JP13: COM2 Mode select
JP8 JP9 Mode
(2-3) (2-3) RS232
(1-2) (2-3) RS485 Half Duplex
(1-2) (1-2) RS485/422 Full Duplex
JP14: Enable COM2 RS-485/422 Receiver Termination
Pin
Function
(1-2) Closed High
(2-3) Closed Low
JP11: COM2 Pin9 select
Pin Function
(1-2) Closed RI
(3-4) Closed +5V
(5-6) Closed +12V
JP16, JP17: COM3 Mode select
JP8
JP9
Mode
(2-3) (2-3) RS232
(1-2) (2-3) RS485 Half Duplex
(1-2) (1-2) RS485/422 Full Duplex
JP18: Enable COM3 RS-485/422 Receiver Termination
Pin
Function
(1-2) Closed High
(2-3) Closed Low
JP15: COM3 Pin9 select
Pin
Function
(1-2) Closed RI
(3-4) Closed +5V
(5-6) Closed +12V