PerfecTron OXY5362A User manual

OXY5362A
3.5" SBC with Intel® Kabylake-U SoC
www.perfectron.com
Version
1.7

www.perfectron.com
1
Safety Information
Electrical safety
 To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
 When adding or removing devices to or from the system, ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible, disconnect
all power cables from the existing system before you add a device.
 Before connecting or removing signal cables from the motherboard, ensure that all power
cables are unplugged.
 Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
 Make sure that your power supply is set to the correct voltage in your area.
 If you are not sure about the voltage of the electrical outlet you are using, contact your
local power company.
 If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your local distributor.
Operation safety
 Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
 Before using the product, make sure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
 To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,
sockets and circuitry.
 Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
 Place the product on a stable surface.
 If you encounter any technical problems with the product, contact your local distributor.
Statement
 All rights reserved. No part of this publication may be reproduced in any form or by any
means, without prior written permission from the publisher.
 All trademarks are the properties of the respective owners.
 All product specifications are subject to change without prior notice.

www.perfectron.com
2
Revision History
Revision Date (dd.mm.yyyy) Changes
V 0.9 01.06.2017 Draft
V 1.0 13.06.2017 Initial Release
V 1.1 15.06.2017
Update latest product photo
Change JP13.JP14,JP15 default setting
Change LVDS and CN18 pin define.
V 1.2 20.06.2017 Change LPC pin define
V 1.3 02.12.2020 Add LVDS VDD JP24 pin define
V 1.4 27.09.2021 Add SATA Power J6 & ATX Power CN11 pin define
V 1.5 26.10.2021 Modify Half size mPCIe slot only support mSATA
V 1.6 22.11.2021 Add COM1 pin define
V 1.7 10.02.2022 Add AMP1 pin define
Packing list
□ OXY5362A 3.5” SBC
□ CD (Driver + user's manual)
□ Optional Accessories
 Cable kit
• SATA cable
• SATA power cable
• USB cable
• COM cable
 Thermal kit:
• Copper heat spreader
• Passive heatsink
If any of the above items is damaged or missing, please contact your local
distributor.

www.perfectron.com
3
Table of Contents
Safety Information ................................................................................................................................................... 1
Electrical safety ....................................................................................................................................................... 1
Operation safety ..................................................................................................................................................... 1
Statement .................................................................................................................................................................. 1
Revision History ....................................................................................................................................................... 2
Packing list ................................................................................................................................................................. 2
Table of Contents..................................................................................................................................................... 3
Chapter 1: Product Information ......................................................................................................................... 4
1.1 Block Diagram .................................................................................................................................................. 4
1.2 Key Features ..................................................................................................................................................... 5
1.3 Board Placement .............................................................................................................................................. 6
Chapter 2: Jumpers and Connectors .............................................................................................................. 7
2.1 Onboard connector and jumper list ............................................................................................................ 7
2.2 Connector and jumper pin definition .......................................................................................................... 8
Chapter 3: Quick Installation Guide ............................................................................................................... 14
Chapter 4: AMI BIOS UTILITY ........................................................................................................................... 15
4.1 Starting ............................................................................................................................................................. 15
4.2 Navigation Keys ............................................................................................................................................. 15
4.3 Main Menu ........................................................................................................................................................ 16
4.4 Advanced Menu .............................................................................................................................................. 17
4.5 Chipset .............................................................................................................................................................. 23
4.6 Security............................................................................................................................................................. 26
4.7 Boot Menu ........................................................................................................................................................ 27
4.8 Save & Exit ....................................................................................................................................................... 28

www.perfectron.com
4
Chapter 1: Product Information
1.1 Block Diagram
SATA

www.perfectron.com
5
1.2 Key Features
System
CPU Type
Intel® Kabylake-U series, BGA type
Intel® Core™ i7-7600U Processor (4M Cache, 3.9GHz) (15W)
Intel® Core™ i5-7300U Processor (3M Cache, 3.5GHz) (15W)
Intel® Core™ i3-7100U Processor (3M Cache, 2.4GHz) (15W)
Memory Type 2 x SO-DIMM DDR4 2133 MHz up to 32 GB
BIOS AMI® UEFI BIOS
Super I/O Fintek F8786E
Watchdog 1-255 sec.
Expansion Slot 1 x Full-size mPCIe/mSATA
1 x Half-size mSATA
Display
Chipset Intel
®
Integrated
Display Port Max. resolution 4096 x 2304
LVDS Dual channel 24bit LVDS
Display Type Display Port, LVDS
Audio
Codec Realtek ALC888 High Definition Audio Codec
Ethernet
Chipset 1 x Intel® I210-IT , 1 x Intel® I219-LM GbE LAN
(support 10/100/1000 Mbps for 2 x RJ45 ports)
WOL Yes
Boot from LAN Yes for PXE
Rear I/O
DisplayPort 2 x DisplayPort
Ethernet 2 x RJ45
USB 4 x USB 3.0
COM 1 x RS232
Internal I/O
SATA 1 x SATAIII (6 Gb/s)
USB 2 x USB 2.0
COM 1 x RS232/422/485
AUDIO Mic-in, Line-out
1 x 3W amplifier (Optional)
FAN 1 x CPU Fan
LVDS 30-pin connector
DIO 8bit
Mechanical and Environment
Form Factor 3.5" SBC
Power Type 9~36V DC-in, 4-pin ATX power connector, AT/ATX mode support
Dimension 146mm x 101mm (5.7" x 4")
Operating Temp. -40 to 85°C
Storage Temp -40 to 85°C
Relative Humidity 10% to 90%, non-condensing
Standard Compliance
Standard Compliance CE/FCC
OS
OS Support Windows®10 64-bit , Linux(Support by request)
*All specifications and photos are subject to change without notice.

www.perfectron.com
6
1.3 Board Placement
JP1
CN11

www.perfectron.com
7
Chapter 2: Jumpers and Connectors
2.1 Onboard connector and jumper list
Label Function
COM1 (Rear) RS232, DB9 connector
DP1 (Rear) DisplayPort
DP2 (Rear) DisplayPort
LAN1 (Rear) RJ45 connector
LAN2 (Rear) RJ45 connector
USB1/2 (Rear) 2 x USB3.0
USB3/4 (Rear) 2 x USB3.0
MPCIE1 Full-size mPCIe/mSATA
MPCIE2 Half-size mSATA
AMP1 Amplifier
LVDS LVDS
CN18 LVDS Control Connector
CN11 ATX Power
J1 DIO header
J5 SATAIII connector
J6 SATA power
J9 Front panel
J10 LPC header
J11 Audio
J12 COM2, RS232/422/485
J13 CPU fan
J14 2 x USB2.0, USB5/6
SW1 LVDS resolution Select
JP1 Clear CMOS
JP2 COM1 RI/+5V/+12V select
JP13 AT/ATX select
JP14 mPCIE1 SATA/PCIe select
JP15 mPCIE2 SATA/PCIe select

www.perfectron.com
8
JP24 LVDS Signal Power
2.2 Connector and jumper pin definition
2.2.1 Jumper
JP1: Clear CMOS
Jumper
Function
description
Setting
1-2 Normal
2-3 Clear CMOS
Default
setting:
1
-
2
JP2: COM1 RI/+5V/+12V
JP13: AT/ATX Mode
Jumper
Function
Setting
1-2 ATX
2-3 AT
Default
setting:
2
-
3
JP14: mPCIe1 signal select
Jumper
Function
Setting
1-2 SATA
Jumper
Function
description
Setting
1-2 Ring
3-4 5V
5-6 12V
Default
setting:
1
-
2

www.perfectron.com
9
2-3 PCIe
Default
setting:
2
-
3
JP15: mPCIe2 signal select
Jumper
Function
description
Setting
1-2 SATA
2-3 PCIe
Default
setting:
2
-
3
JP24 LVDS Signal Power
1-2 5V
2-3 3V3
SW1: LVDS Resolution
Resolution Color
depth Channel
Setting
Drawing
Switch1 Switch2 Switch3 Switch4
800 x 600 18-bit Single On On On On
Off On
1024 x 768 18-bit Single Off On On On
1024 x 768 24-bit Single On Off On On
1280 x 800 18-bit Single Off Off On On
1280 x 1024 24-bit Dual On On Off On
1366 x 768 24-bit Single Off On Off On
1440 x 900 24-bit Dual On Off Off On
1920 x 1080 24-bit Dual Off Off Off On

www.perfectron.com
10
2.2.2 Connector
AMP1
Pin Definition
1 SP_OUTL-
2 SP_OUTL+
3 SP_OUTR+
4 SP_OUTR-
LVDS
Pin
Definition
Pin
Definition
2 30
1 29
1
LVDS_CLK+
2
GND
3
LVDS_CLK
-
4
LVDSA3+
5
GND
6
LVDSA3
-
7
LVDSB3+
8
GND
9
LVDSB3
-
10
LVDSA_CLK+
11
LVDSB2+
12
LVDSA_CLK
-
13
LVDSB2
-
14
GND
15
LVDSB1+
16
LVDSA2+
17
LVDSB1
-
18
LVDSA2
-
19
LVDSB0+
20
LVDSA1+
21
LVDSB0
-
22
LVDSA1
-
23
GND
24
LVDSA0+
25
LVDS_SCLK
26
LVDSA0
-
27
LVDS_SDATA
28
GND
29
VDD
30
VDD
CN11: ATX Power
PIN DEFINITION
1 GND
2 GND
3 DC in
4 DC in
CN18: LVDS Control connector
PIN
DEFINITION
1
+12V
2
+12V
3
+12V
4
5V
5
5V
6
GND

www.perfectron.com
11
7
GND
8
Backlight Enable
9
Backlight control
10
GND
J1: DIO
PIN
DEFINITION
1
DIO0
2
DIO1
3
DIO2
4
DIO3
5
DIO4
6
DIO5
7
DIO6
8
DIO7
9
3.3V
10
GND
J6: SATA Power
PIN DEFINITION
1 12V
2 GND
3 GND
4 5V
J9: Front Panel
PIN
DEFINITION
PIN
DEFINITION
1
FP_HDLED+
2
FP_PLED+
3
SATALED#
4
GND
5
GND
6
EC_PWR_BTN
7
RESET
-
8
GND
9
J10: LPC
PIN
DEFINITION
1
GND
2
GND
3
+3.3VSB
4
LPC_AD0
5
LPC_AD1
6
LPC_AD2
7
LPC_AD3
8
LPC_FRAME#
9
PLTRST#_BUF1
10
LPC_CLK_1

www.perfectron.com
12
J11: Audio
PIN
DEFINITION
1
GND
2
MIC1_JD
3
MIC1_R
4
MIC1_L
5
FRONT_JD
6
FRONT_R
7
FRONT_L
8
LINE1_JD
9
LINE1_R
10
LINE1_L
COM1: RS232 with 5V/12V selectable
J12: COM2 RS232/422/485
Note: RS232/422/485 can be set by BIOS.
Pin
RS232 mode (Default)
RS422 mode
RS485 mode
1
5V
2
GND
GND
GND
3
RI
4
DTR
RX
-
5
CTS
6
TXD
RX+
7
RTS
8
RXD
TX+
DATA
-
9
DSR
10
DCD
TX
-
DATA+

www.perfectron.com
13
J14: USB2.0 x 2
PIN
DEFINITION
1
+5V
2
USB5
-
3
USB5+
4
GND
5
GND
6
+5V
7
USB6
-
8
USB6+
9
GND
10
GND

www.perfectron.com
14
Chapter 3: Quick Installation Guide

www.perfectron.com
15
Chapter 4: AMI BIOS UTILITY
This chapter provides users with detailed descriptions on how to set up a basic system
configuration through the AMI BIOS setup utility.
4.1 Starting
To enter the setup screens, perform the following steps:
 Turn on the computer and press the <Del> key immediately.
 After the <Del> key is pressed, the main BIOS setup menu displays. Other setup screens can be
accessed from the main BIOS setup menu, such as the Chipset and Power menus.
4.2 Navigation Keys
The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup utility
hot keys can be used at any time during the setup navigation process.
Some of the hot keys are <F1>, <F10>, <Enter>, <ESC>, and <Arrow> keys.
Left/Right The Left and Right <Arrow> keys moves the cursor to select a menu.
Up/Down The Up and Down <Arrow> keys moves the cursor to select a setup screen
or sub-screen.
+− Plus/Minus The Plus and Minus <Arrow> keys changes the field value of a particular
setup setting.
F1 The <F1> key offer general help.
F2 The <F3> key load previous values.
F3 The <F3> key load optimized defaults.
F4 The <F4> key saves any changes made and exits the BIOS setup utility.
Esc The <Esc> key discards any changes made and exits the BIOS setup utility.
Enter The <Enter> key displays a sub-screen or changes a selected or highlighted
option in each menu.

www.perfectron.com
16
4.3 Main Menu
The Main menu is the first screen that you will see when you enter the BIOS Setup Utility.

www.perfectron.com
17
4.4 Advanced Menu
The Advanced Menu allows you to configure your system for basic operation. Some entries are defaults
required by the system board, while others, if enabled, will improve the performance of your system or let
you set some features according to your preference.
Setting incorrect field values may cause the system to malfunction.
4.4.1 Trust Computing

www.perfectron.com
18
4.4.2 IT8786 Super IO Configuration
4.4.2.1 Serial Port 1 Configuration

www.perfectron.com
19
4.4.2.2 Serial Port 2 Configuration