PerfecTron INS8367B User manual

Version 1.0
INS8367B
Intel® Alder Lake-S 12th Processor with
Q670 Chipset Mini-ITX
www.perfectron.com

www.perfectron.com
1
Safety Information
Electrical safety
 To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before
relocating the system.
 When adding or removing devices to or from the system, ensure that the power cables for the
devices are unplugged before the signal cables are connected. If possible, disconnect all power
cables
from the existing system before you add a device.

Before connecting or removing signal cables from the motherboard, ensure that all power cables
are
unplugged.

Seek professional assistance before using an adapter or extension cord. These devices could
interrupt the grounding circuit.
 Make sure that your power supply is set to the correct voltage in your area.
 If you are not sure about the voltage of the electrical outlet you are using, contact your local
power company.
 If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your local distributor.
Operation safety
 Before installing the motherboard and adding devices on it, carefully read all the manuals that
came with the package.
 Before using the product, make sure all cables are correctly connected and the power cables are not
damaged. If you detect any damage, contact your dealer immediately.

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets
and
circuitry.
 Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may
become wet.
 Place the product on a stable surface.
 If you encounter any technical problems with the product, contact your local distributor
Statement
 All rights reserved. No part of this publication may be reproduced in any form or by any means,
without prior written permission from the publisher.
 All trademarks are the properties of the respective owners.
 All product specifications are subject to change without prior notice

www.perfectron.com
2
RoHS Compliance
Perfectron RoHS Environmental Policy and Status Update
Perfectron is a global citizen for building the digital infrastructure. We are committed to
providing green products and services, which are compliant with
European Union RoHS (Restriction on Use of Hazardous Substance in Electronic Equipment) directive
2011/65/EU, to be your trusted green partner and to protect our environment.
In order to meet the RoHS compliant directives, Perfectron has established an engineering and
manufacturing task force to implement the introduction of green products. The task force will ensure that
we follow the standard Perfectron development procedure and that all the new RoHS components and new
manufacturing processes maintain the highest industry quality levels for which Perfectron are renowned.
The model selection criteria will be based on market demand. Vendors and suppliers will ensure that all
designed components will be RoHS compliant

www.perfectron.com
3
Revision History
Revision Date (yyyy/mm/dd) Changes
V1.0 2022/12/28 First release
Packing List
Item Description Q’ty
1 INS8367B 1
2 CD(Drivier + User’s manual) 1
If any of the above items is damaged or missing, please contact your
local distributor.

www.perfectron.com
4
Table of Contents
Safety Information .............................................................................................................................................................. 1
Electrical safety .................................................................................................................................................................. 1
Operation safety ................................................................................................................................................................ 1
Statement ......................................................................................................................................................................... 1
RoHS Compliance ................................................................................................................................................................ 2
Revision History .................................................................................................................................................................. 3
Packing List ......................................................................................................................................................................... 3
Chapter 1 : Product Introduction ........................................................................................................................................ 6
1.1 Specifications ............................................................................................................................................................... 6
1.2 Block Diagram .............................................................................................................................................................. 8
1.3 Board Placement .......................................................................................................................................................... 9
Chapter 2 : Jumpers and Connectors Loacation ................................................................................................................ 10
2.1 Jumpers And Connectors List ........................................................................................................................................ 10
2.2 Jumper Settings .......................................................................................................................................................... 11
Chapter 3: AMI BIOS UTILITY ............................................................................................................................................. 16
3.1 Staring ....................................................................................................................................................................... 16
3.2 Navigation Keys .......................................................................................................................................................... 16
3.3 Main Page .................................................................................................................................................................. 17
3.4 Advance Page ............................................................................................................................................................. 19
3.4.1 Onboard Device .................................................................................................................................................. 20
3.4.2 CPU Configuration ............................................................................................................................................... 23
3.4.3 VMD setup menu ................................................................................................................................................. 24
3.4.4 Trusted Computing .............................................................................................................................................. 25
3.4.5 Super IO Configuration ........................................................................................................................................ 26
3.4.6 Serial Port 1 Configuration .................................................................................................................................... 27
3.4.7 Serial Port 2 Configuration .................................................................................................................................... 28
3.4.8 Hardware Monitor ............................................................................................................................................... 29
3.4.9 S5 RTC Wake Settings ........................................................................................................................................... 30
3.4.10 Network Stack Configuration ......................................................................................................................... 31
3.4.11 NVMe Configuration ..................................................................................................................................... 32
3.5 Security Page .............................................................................................................................................................. 33
3.5.1 HDD Security ........................................................................................................................................................ 34
3.5.2 Secure Boot .......................................................................................................................................................... 35

www.perfectron.com
5
3.5.3 Key Management ................................................................................................................................................. 36
3.6 Boot Page .................................................................................................................................................................. 39
3.6.1 (List Boot Device Type) Drive BBS Priorities ............................................................................................................... 42
3.7 Save & Exit Page .......................................................................................................................................................... 43
3.8 Event Logs .................................................................................................................................................................. 44
3.8.1 Change Smbios Event Log Setting ........................................................................................................................... 45
3.8.2 ViewSmbios Event Log ........................................................................................................................................... 46

www.perfectron.com
6
Chapter 1 : Product Introduction
1.1 Specifications
System
CPU 12th Gen Intel® Alder Lake LGA1700 Socket Processor / Core i9/i7/i5/i3 Processor,
TDP 35/65W
System Memory DDR5 4800 MHz / 2 x 262-pin SO-DIMM / Max. 64GB (Non-ECC) Horizontal
Chipset Intel® Q670
Graphics Nuvoton NCT6126D
I/O Chipset TPM Header
TPM Temperature Monitor, Voltage Monitor, Fan Monitor
BIOS 1-255 sec. or 1-255 min. software programmable and can be generate system reset
H/W Monitor CPU FAN / System FAN
Watchdog Timer AMI BIOS
Expansion
M.2
1 x M.2 22
30
E
-
Key
(PCIe
3.0
X1 , USB2.0)
1 x M.2 2242/2280 (PCIe3.0 X4, SATAIII)
1 x M.2 3042 B-Key (USB2.0, PCIe3.0 X1, SATAIII)
PCIe Slot 1 x PCIe 3.0 X4 slot
Display
Chipset Intel® UHD Graphics 770
HDMI Up to 4K (4096 x 2160) @30 Hz
Display Port Up to 4K (4096 x 2304) @60 Hz
LVDS Up to 1920 x 1200 @60 Hz
Ethernet
Chipset Intel® I219-LM GbE LAN + Intel® I225V 2.5 GbE LAN
Audio
Codec Realtek® ALC888
Rear I/O
USB 4 x USB3.1
Display port 1 x DP ; 1 x HDMI
LAN 2(1 x GbE ; 1 x 2.5GbE)
AUDIO 1 x MIC-IN ; 1 x LINE-OUT

www.perfectron.com
7
Internal I/O
SATAIII 2
USB3.1 2
USB2.0 5
Display I/O 1 x LVDS
1 x Backlight connector
Serial 2 (1 x Support RS-232/422/485)
FAN 1 x 4-pin CPU Fan Connector / 1 x 4-pin System Fan Header
Power
1 x 12V DC IN Jack( Colay 19V)
1 x ATX 4pin (AT/ATX mode by jumper setting)
Others
1 x Front Audio Header (Mic-in / Line-out), 1 x CMOS Jumper,
1 x panel power select header,1 x SATA power,
1 x FIO header, 1 x intrusion switch header, 1 x DMIC header, 1x buzzer header
1 x GPIO header
Environmental
Form Factor Mini ITX
Power Type 12V DC-IN
Dimension 170mm x 170mm
Operating
Temperature
ET : -20℃ ~ 70℃
UT : -40℃ ~ 85℃
Storage
Temperature -40℃ ~ 85℃
Relative humidity 10% to 95%, non-condensing
Standard Compliance
Standart Compliance
CE / FCC
OS
OS Support Windows®10 64-bit
Linux(Support by request)

www.perfectron.com
8
1.2 Block Diagram

www.perfectron.com
9
1.3 Board Placement

www.perfectron.com
10
Chapter 2 : Jumpers and Connectors Loacation
2.1 Jumpers And Connectors List
Label Function
1 Front Panel Audio Header
2 DMIC Header
3 PCIe x 4 SLot
4 LVDS Backlight Header
5 LVDS Connector
6 Serial Port Header(COM1)
7 Serial Port Header(COM2)
8 MiAPI Header
9 SATA Power Header
10 SATA
11 SATA
12 USB2.0 Header
13 ATX 4pin
14 Speaker Header
15 Buzzer Header
16 TPM Header
17 Clear CMOS Header
18 Intruder Header
19 RTC Battery Header
20 M.2 2230 E-Key
21 M.2 2242/2280M-Key
22 M.2 3042B-Key
23 USB3.0 Header
24 System Fan Header
25 CPU Fan Header
26 USB2.0 Header
27 LGA1700 CPU Socket
28 DDR5 SO-DIMM Socket
29 DDR5 SO-DIMM Socket
30 Panel Power Option
31 AT/ATX Mode

www.perfectron.com
11
2.2 Jumper Settings
Front Panel Header
PIN DEFINITION PIN DEFINITION
1
HDD_POWER_LED
2
POWER_LED_MAIN
3 HDD_LED# 4 POWER_LED_ALT
5 GND 6 POWER_SWITCH#
7 RESET_SWITCH# 8 GND
9 +5V_DC 10 Key(no pin)
Panel Power Option
PIN
DEFINITION
PIN
DEFINITION
1
Key(no pin)
2
3.3V
3
12V
4
LCD_VCC
5 Key(no pin)
6 5V
3.3V(Default)
5V
12V

www.perfectron.com
12
LVDS Connector
PIN
DEFINITION
PIN
DEFINITION
1
LVDS0_LINK3_CON_DP
21 NC
2
LVDS0_LINK3_CON_DN
22 VCC3
3
LVDS0_LINK2_CON_DP
23
CABLE_ID
2
4
LVDS0_LINK2_CON_DN
24 GND
5
LVDS0_LINK1_CON_DP
25
GND
6
LVDS0_LINK1_CON_DN
26
LVDS0_CLK_CON_DP
7
LVDS0_LINK0_CON_DP
27
LVDS0_CLK_CON_DN
8
LVDS0_LINK0_CON_DN
28
GND
9
LVDS1_LINK3_CON_DP
29
GND
10
LVDS1_LINK3_CON_DN
30
CABLE_ID
3
11
LVDS1_LINK
2
_CON_DP
31
LVDS_DDC_SCL
12
LVDS1_LINK
2
_CON_DN
32
CABLE_ID
1
13
LVDS1_LINK
1
_CON_DP
33 CH7513_BKLT_CTRL
14
LVDS1_LINK
1
_CON_DN
34
LVDS
1
_CLK_CON_DP
15
LVDS1_LINK
0
_CON_DP
35
LVDS
1
_CLK_CON_DN
16
LVDS1_LINK
0
_CON_DN
36 NC
17
GND
37
NC
18
PANEL_PWR
38
NC
19 PANEL_PWR 39
CABLE_ID
4
20
PANEL_PWR
40
NC
LVDS Backlight Header
PIN
DEFINITION
1
LVDS_BKTEN_R
2
LVDS_PWM
3
BKLT_PWR (12v)
4
BKLT_PWR (12v)
5
GND
6
GND
7
BRIGHT_UP
-
8
BRIGHT_DOWN
-
AT/ATX Mode Jumper
PIN
DEFINITION
1-2 AT Mode
2-3 ATX Mode(Default)

www.perfectron.com
13
Front Audio Header
PIN
DEFINITION
PIN
DEFINITION
1
MIC
2
AUD_GND
3
MIC_BIAS
4
Presence
5
FP_OUT_R
6
AUD_SENSE_MIC_FP
7
FIO_SENSE
8
Key(no pin)
9
FP_OUT_L
10
AUD_SENSE_HP
DMIC Header
PIN
DEFINITION
1
3V3
2
DMIC_DATA
3
GND
4
DMIC_CLK
5
Key (no pin)
Internal Speaker Header
PIN
DEFINITION
1
LOUT-
2
LOUT+
3
ROUT+
4
ROUT-
USB2.0 Header
PIN
DEFINITION
1
5V_USB
2
Data(negative)
3
Data(positive)
4
GND
5
Key (no pin)
Dual USB2.0 Header
PIN
DEFINITION
PIN
DEFINITION
1
5V_USB
2
5V_USB
3
Data (negative)
4
Data (negative)
5
Data (positive)
6
Data (positive)
7
GND
8
GND
9
Key (no pin)
10
No Connect
Dual USB3.0 Header
PIN
DEFINITION
PIN
DEFINITION
1
5V_USB
20
Key(no pin)
2
SSRX
-
19
5V_USB
3
SSRX+
18
SSRX
-
4
GND
17
SSRX+
5
SSTX
-
1
6
GND
6
SSTX+
15
SSTX
-
7
GND
14
SSTX+
8
D
-
13
GND
9
D+
12
D
-
10
NC
11
D+

www.perfectron.com
14
Serial Port Pin-Out(COM1)
PIN
RS232
RS422
RS485
1
DCD
TX
-
DATA
-
2
RXD#
TX+
DATA+
3
TXD#
RX
-
NC
4
DTR
RX+
NC
5
GND
GND
GND
6
DSR
NC
NC
7
RTS
NC
NC
8
CTS
NC
NC
9
RI
NC
NC
10
Key(no pin)
NC
NC
Serial Port Pin-Out(COM2)
PIN
RS232
RS422
RS485
1
DCD
NC
NC
2
RXD#
NC
NC
3
TXD#
NC
NC
4
DTR
NC
NC
5
GND
NC
NC
6
DSR
NC
NC
7
RTS
NC
NC
8
CTS
NC
NC
9
RI
NC
NC
10
Key(no pin)
NC
NC
Clear CMOS Header
CPU FAN Header
PIN
DEFINITION
1
GND
2
+12V
3
CPU_FAN_TACH
4
CPU_FAN_CTRL
SATA Power Header
PIN
DEFINITION
1
3V3
2
GND
3
5V
4
GND
5
12V
PIN
DEFINITION
1-2 Clear CMOS
2-3 Normal(Default)

www.perfectron.com
15
ATX 4pin connector
PIN
DEFINITION
PIN
DEFINITION
1 GND 2 GND
3 12V IN 4 12V IN
MiAPI Header
PIN
DEFINITION
PIN
DEFINITION
1
MAPI_GPIO1
2 VCC
3
MAPI_GPIO
2
4
MAPI_GPIO
6
5
MAPI_GPIO
3
6
MAPI_GPIO
7
7
MAPI_GPIO
4
8
MAPI_GPIO
8
9
MAPI_GPIO
5
10
MAPI_GPIO
9
11
WD_Time
12
MAPI_GPIO
10
13
Power Button
14
SMBUS_DATA
15
UART_TX
16
SMBUS_CLK
17
UART_RX
18
5VSB
19
GND
20
N/A
TPM Header
PIN
DEFINITION
1
VCC3_TPM
2
TPM_CS2
3
TPM_MISO
4
Key(no pin)
5
TPM_MOSI
6
PLTRST_N
7
PRIQ_N
8
GND
9
NC
10
TPM_CLK
11
NC
12
TPM_DET
13
NC
14
VSB_3V3

www.perfectron.com
16
Chapter 3: AMI BIOS UTILITY
This chapter provides users with detailed descriptions on how to set up a basic system
configuration through the AMI BIOS setup utility.
3.1 Staring
To enter the setup screens, perform the following steps:
• Turn on the computer and press the <Del> key immediately.
• After the <Del> key is pressed, the main BIOS setup menu displays. Other setup screens
can be accessed from the main BIOS setup menu, such as the Chipset and Power menus.
3.2 Navigation Keys
The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS
setup utility hot keys can be used at any time during the setup navigation process.
Some of the hot keys are <F1>, <F10>, <Enter>, <ESC>, and <Arrow> keys.
Left/Right The Left and Right <Arrow> keys moves the cursor to select a
menu.
Up/Down The Up and Down <Arrow> keys moves the cursor to select a
setup screen or sub-screen.
+− Plus/Minus The Plus and Minus <Arrow> keys changes the field value of a
particular setup setting.
Tab The <Tab> key selects the setup fields.
F1 The <F1> key displays the General Help screen.
F10 The <F10> key saves any changes made and exits the BIOS setup
utility.
Esc The <Esc> key discards any changes made and exits the BIOS
setup utility.
Enter The <Enter> key displays a sub-screen or changes a selected or
highlighted option in each menu.

www.perfectron.com
17
3.3 Main Page
Field Name
BIOS Vend
e
r
Default Value American Megatrends
Comment This field is not selectable. There is no help text associated with it.
Field Name
Core
Version
Default Value 5.24
Comment This field is not selectable. There is no help text associated with it
Field Name
Compliancy
Default Value UEFI 2.8 ; PI 1.6
Comment This field is not selectable. There is no help text associated with it
Field Name
BIOS Version
Default Value Display the version of the BIOS
Comment This field is not selectable. There is no help text associated with it
Field Name
Build Date
Default Value Display build date of the BIOS
Comment This field is not selectable. There is no help text associated with it.
Field Name
ME FW Version
Default Value ME Firmware Version.

www.perfectron.com
18
Comment This field is not selectable. There is no help text associated with it.
Field Name
Processor Information
Default Value Display the installed CPU brand.
Comment This field is not selectable. There is no help text associated with it.
Field Name
Microcode Version
Default Value Display the CPU microcode revision.
Comment This field is not selectable. There is no help text associated with it.
Field Name
Total Memory
Default Value Display the installed memory size.
Comment This field is not selectable. There is no help text associated with it.
Field Name
Memory Slot1
Default Value Display the installed memory size of slot1.
Comment This field is not selectable. There is no help text associated with it
Field Name
Memory Slot2
Default Value Display the installed memory size of slot2.
Comment This field is not selectable. There is no help text associated with it
Field Name
Memory Frequency
Default Value Display the installed memory Frequency
Comment This field is not selectable. There is no help text associated with it.
Field Name
Serial ATA Port 4
Value Display the installed SATA device model/size of port 4.
Comment This field is not selectable. There is no help text associated with it.
Field Name
Serial ATA Port
5
Value Display the installed SATA device model/size of port 5.
Comment This field is not selectable. There is no help text associated with it.
Field Name
Serial ATA Port
6
Value Display the installed SATA device model/size of port 6.
Comment This field is not selectable. There is no help text associated with it.
Field Name
Serial ATA Port
7
Value Display the installed SATA device model/size of port 7.
Comment This field is not selectable. There is no help text associated with it.
Field Name
System Date
Default Value [Www mm/dd/yyyy]
Possible Value Www : Mon/Tue/Wed/Thu/Fri/Sat/Sun
mm : 1-12

www.perfectron.com
19
dd : 1-31
yyyy : 1900-9999
Help Set the Date. Use Tab to switch between Date elements. Default
Rangers: Year : 1900-9999
Months : 1-12
Days : Dependent on month Range of Years may vary.
Field Name
System
Time
Default Value [hh :mm :ss]
Possible Value hh : 0-23
mm : 0-59
ss : 0-59
Help Set the Time. Use Tab to switch between Time elements.
3.4 Advance Page
Field Name
Onboard Device
Help Onboard Device Configuration
Comment Press Enter when selected to go into the associated Sub-Menu.
Field Name
CPU
Configuration
Help CPU Configuration Parameters