PerfecTron OXY5741A User manual

Version 1.3
OXY5741A
Rugged Open-Standard EBX SBC
Expansion, Extend Temperture
-40 to 85°C
www.perfectron.com

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
1
Safety Information
Electrical safety
Topreventelectricalshockhazard,disconnectthepowercablefromtheelectricaloutletbefore
relocating thesystem.
Whenaddingorremovingdevicestoorfromthesystem,ensurethatthepowercablesforthe
devices are unplugged before the signal cables are connected. If possible, disconnect all power
cablesfromtheexisting systembeforeyou add a device.
 Before connecting or removing signal cables from the motherboard, ensure that all power cables
are unplugged.
 Seek professional assistance before using an adapter or extension cord. These devices could
interrupt the groundingcircuit.
Makesure that yourpower supplyissettothecorrect voltagein yourarea.
If you are not sure about the voltage of the electrical outlet you are using, contact your local
power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or yourlocal distributor.
Operation safety
Beforeinstallingthemotherboardandaddingdevicesonit,carefullyreadallthemanualsthat
came with thepackage.
 Before using the product, make sure all cables are correctly connected and the power cables are
notdamaged.Ifyoudetectanydamage,contactyourdealerimmediately.
 Toavoidshortcircuits, keeppaperclips,screws,andstaplesawayfromconnectors,slots,sockets
and circuitry.
Avoiddust,humidity,andtemperatureextremes.Donotplacetheproductinanyareawhereit
may becomewet.
Place theproduct ona stable surface.
Ifyouencounteranytechnicalproblemswiththeproduct,contactyourlocaldistributor
Statement
Allrightsreserved.Nopartofthispublicationmaybereproducedinanyformorbyanymeans,
without prior written permission fromthe publisher.
All trademarks are theproperties oftherespective owners.
All productspecificationsaresubject tochangewithoutprior notice

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
2
RoHS Compliance
Perfectron RoHS Environmental Policy and Status Update
Perfectron is a global citizen for building the digital infrastructure. We are
committed to providing green products and services, which are compliant with
European Union RoHS (Restriction on Use of Hazardous Substance in
Electronic Equipment) directive 2011/65/EU, to be your trusted green partner
and to protect our environment.
In order to meet the RoHS compliant directives, Perfectron has established an engineering
and manufacturing task force to implement the introduction of green products. The task force
will ensure that we follow the standard Perfectron development procedure and that all the
new RoHS components and new manufacturing processes maintain the highest industry
quality levels for which Perfectron are renowned.
The model selection criteria will be based on market demand. Vendors and suppliers will
ensure that all designed components will be RoHS compliant

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
3
Revision History
Revision
Date (yyyy/mm/dd)
Changes
V1.0
2021/04/22
First release
V1.1
2021/05/27
Add Mechanical Dimensions
V1.2
2021/9/10
Modify DIO Pin Define
V1.3
2021/12/7
Typesetting modification
Packing List
Item
Description
Q’ty
1
OXY5741A EBX SBC
1
2
CD(Drivier + User’s manual)
1
If any of the above items is damaged or missing, please contact your local
distributor.

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
4
Table of Contents
Safety Information................................................................................................................................................ 1
Electrical safety ..................................................................................................................................................... 1
Operation safety.................................................................................................................................................... 1
Statement............................................................................................................................................................... 1
RoHS Compliance ................................................................................................................................................ 2
Revision History.................................................................................................................................................... 3
Packing List............................................................................................................................................................ 3
Chapter 1 : Product Introduction .................................................................................................................... 6
1.1 Specifications.................................................................................................................................................. 6
1.2 Block Diagram................................................................................................................................................. 9
1.3 Board Placement........................................................................................................................................... 10
Chapter 2 : Jumpers and Connectors Loacation..................................................................................... 12
2.1 Jumpers and connectors list......................................................................................................................... 12
2.2 Jumper Settings............................................................................................................................................ 13
Chapter 3: AMI BIOS UTILITY......................................................................................................................... 22
3.1 Starting........................................................................................................................................................... 22
3.2 Navigation Keys............................................................................................................................................ 22
3.3 Main Menu..................................................................................................................................................... 23
3.4 Advanced Menu............................................................................................................................................ 24
3.4.1 CPU Configuration................................................................................................................................. 24
3.4.2 Power & Performance............................................................................................................................ 25
3.4.3 PCH-FW Configuration.......................................................................................................................... 26
3.4.4 AMT Configuration................................................................................................................................. 27
3.4.4.1 CIRA Configuration......................................................................................................................... 27
3.4.4.2 ASF Configuration........................................................................................................................... 28
3.4.4.3 Secure Erase Configuration........................................................................................................... 29
3.4.4.4 OEM Flags Settings........................................................................................................................ 29
3.4.4.5 MEBx Resolution Settings.............................................................................................................. 30
3.4.5 Trusted Computing ................................................................................................................................ 32
3.4.6 ACPI Settings......................................................................................................................................... 33
3.4.7 IT8786 Super IO Configuration............................................................................................................. 34
3.4.7.1 Secial Poet 1 Configuration............................................................................................................ 34
3.4.7.2 Secial Poet 2 Configuration............................................................................................................ 35
3.4.8 Hardware Monitor..................................................................................................................................... 36
3.4.8.1 Smart Fan Function .......................................................................................................................... 36

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
5
3.4.8.2 System Fan Function........................................................................................................................ 37
3.4.9 PCI Subsystem Settings........................................................................................................................ 38
3.4.10 USB configuation................................................................................................................................. 38
3.4.11 CSM Configuration............................................................................................................................... 39
3.4.12 NVMe Configuration ............................................................................................................................ 40
3.4.13 Network Stack Configuration............................................................................................................... 41
3.5 Chipset........................................................................................................................................................... 42
3.5.1 System Agent (SA) Configuration......................................................................................................... 42
3.5.2 PCH-IO Configuration............................................................................................................................ 44
3.5.2.1 PCI Express configuration.............................................................................................................. 44
3.5.2.2 SATA And RST configuration........................................................................................................ 46
3.5.2.3 Security configuration ..................................................................................................................... 47
3.6 Security.......................................................................................................................................................... 49
3.6.1 Administrator Password......................................................................................................................... 49
3.6.2 User Password....................................................................................................................................... 50
3.6.3 Secure Boot............................................................................................................................................ 50
3.6.3.1 Restore Factory Keys..................................................................................................................... 51
3.6.3.2 Key Management............................................................................................................................ 51
3.6.3.3 Restore Factory Keys..................................................................................................................... 52
3.6.3.4 Export Secure Boot variables......................................................................................................... 52
3.6.3.5 File System...................................................................................................................................... 53
3.6.3.6 Restore DB defaults........................................................................................................................ 53
3.6.3.7 Platform Key(PK)............................................................................................................................. 54
3.6.3.8 Key Exchange Kesys...................................................................................................................... 54
3.6.3.9 Authorized Signatures..................................................................................................................... 55
3.6.3.10 Forbidden Signatures.................................................................................................................... 55
3.6.3.11 Authorized TimeStamps............................................................................................................... 56
3.6.3.12 OsRecovery Signatures................................................................................................................ 56
3.7 Boot................................................................................................................................................................ 57
3.8 Save & Exit.................................................................................................................................................... 58
3.8.1 Save Changes and Exit......................................................................................................................... 58
3.8.2 Discard Changes and Exit..................................................................................................................... 59
3.8.3 Save Changes and Reset...................................................................................................................... 59
3.8.4 Discard Changes and Reset ................................................................................................................. 60
3.8.5 Save Changes........................................................................................................................................ 60
3.8.6 Discard Changes.................................................................................................................................... 61
3.8.7 Restore Defaults .................................................................................................................................... 61
3.8.8 Save as User Defaults........................................................................................................................... 62
3.8.9 Restore User Defaults ........................................................................................................................... 62

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
6
Chapter 1 : Product Introduction
1.1 Specifications
System
CPU
Intel® Core™ i7-9850HE Processor
(6 Cores/12 Threads,9M Cache,up to 4.40GHz),45W
Intel® Core i7-9850HL Processor
(6 Cores/12 Threads,9M Cache,up to 4.10GHz), 25W
Intel® XEON® E-2276ME Processor
(6 Cores/12 Threads,12M Cache,up to 4.50GHz),45W
Intel® XEON® E-2276ML Processor
(6 Cores/12 Threads,12M Cache,up to 4.20GHz),25W
Intel® Core™ i5-8400H Processor
(6 Cores/12 Threads,8M Cache,up to 4.20GHz),45W
Memory type
2 x 260 Pin DDR4 2400MHz SO-DIMM
(up to 128GB, XEON® SKU support ECC)
Chipset
CM246
BIOS Code
AMI UEFI BIOS
BIOS Flash
SPI Flash
Super I/O
ITE 8786
TPM
TPM2.0(SLB9665)
iAMT
iAMT12.0
WatchDog
1-255 sec. or 1-255 min. software programmable and can be generate
system reset
Display
Chipset
Intel® UHD Graphics 630
LVDS
Dual channel 24-bit LVDS, max resolution up to 1920 x 1080 @ 60Hz
Display Port
Up to 4096 x 2304 @ 60Hz
Multi-
Display
Triple simultaneous displays with 48-bit LVDS+DP
Audio
Codec
ALC888S
Expansion
M.2
1 x M.2(M-key,Type: 2280, SATA/PCIe 3.0 x 4 NVMe)
Mini PCIe
2 x Full size (USB / PCIe and 1 x micro SIM Card)
FPE
1
PCIe/104
1 x TYPE 2

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
7
Chipset
Intel® I210 & I219LM GbE LAN(10/100/1000 Mbps support)
WOL
Yes
Boot from LAN
Yes for PXE
Rear I/O
Display Port
2
USB 3.0
4 x USB3.0
LAN
2
Front I/O
LED
6 (HDD, 2 x LANACT+LINK) RED/GREEN LED
PW Button
1
USB
2 x USB 3.0
Internal I/O
USB2.0
4
GPIO
1(4in/4out)
SATAIII
4 (0,1,5 RAID)
SATA Power
4
DP
1
Audio
1 (Line-out / Mic-in)
Serial
2 (RS-232/422/485 autoflow control)
DC connector
1
LVDS Inverter
1
LVDS connector
1
LPC
1
CPU FAN
1
Front Panel
Control
Power LED, HD LED, Reset, Power Switch, Buzzer
Mechanical and Environmental
Form Factor
EBX
Power Type
DC-IN 12V
Power
Consumption
180W
Dimension
146mm x 243mm

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
8
Operation
Temperture
-40 to 85°C
Storage
Temperture
-40 to 85°C
Relative Humidity
10% to 90%, non-condensing
Standard Compliance
Standart
Compliance
CE / FCC
Modular Architecture
PCIe/104 Bus
PCIe/104 (PCIe v3.0, Type 2) bus –Two Gen3.0 x 4 lanes plus quard
Gen 3.0 x1 lanes.
Supports integration with stackable PCIe/104 and/or PCI/104-Express
I/O cards.
PCI-PCIe bridge adapter required to support PCI-104 and/or PC/104-Plus
IO cards.
FPE
FPE B2B connector to support PCIe Gen3.0 x16 lanes
Use this feature configures the PCI-E port Bifuraction setting for a PCI-E port
Specified by the user. The options are x8x4x4, x8x8 and x16 (SK229)
3 card slots available for PCIe/104 or PCIe adapter cards example :
(1) FPE/PCIe104 to 4 mini SAS connectors (SK229)
(2) Mini SAS to PCIe x16 slot (x8 signal (SK228)
(3) Mini SAS to PCIe x16 slot (x16 signal (SK226/SK230)
(4) Mini SAS to MXM adapter board (SK224)
Mini PCI/e
2 x Full size mini PCIE slot
(1) 1 x slot dedicated for Mini-PCIe card I/O module (i.e. MIL-STD-1553,
ARINC 429, serial, Ethernet, GPS, etc.)
(2) 1 x slot auto-detectable mSATAstorage or Mini-PCIe card I/O
(3) 60+ pins available on DTL-38999 for Mini-PCIe I/O signals
M.2
M.2 2280 slot to support PCIe Gen3.0 x4 or NVME SSD storage device
by jumper setting.
Expansion I/O
Support
5 to 6 card slots available for PCIe/104 or PCI/104-Express cards example :
(1) HDSDI/PAL/NTSC H.264 frame grabber (mPCIe by SK401)
(2) H.264 video recorder/network streaming card, (mPCIe by SK401)
(3) MIL-STD-1553 /ARINC429 (mPCIe by SK401)
(4) CAN data-bus module (mPCIe by SK401)
(5) Ethernet NIC / 10GbE LAN switch (SK506 ; SK502 )
Data Storage
4 x SATA controllers for SATA 3.0 and 1 x NVME SSD can support Data
Storage function
(1) SATA LAN 0
(2) SATA LAN 1
(3) SATA LAN 2
(4) SATA LAN 3
(5) M.2 2280 NVMe SSD

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
9
1.2 Block Diagram

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
10
1.3 Board Placement

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
11
1.4 Mechanical Dimensions

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
12
Chapter 2 : Jumpers and Connectors Loacation
2.1 Jumpers and connectors list
Label
Function
BAT1
BATTERY connector
CN1
Inverter connector
CN10/CN12/CN14/CN16
SATA Power
CN17
LPC connector (Update BIOS)
CN19
SMBUS
CN2
LVDS Connector
CN6/CN7
USB2.0 (Total 4 Port)
CN8
M.2 M KEY Connector
CN9/CN11/CN13/CN15
Serial SATA Connectors
DC_JACK1
ATX12V DC connector
DIMM0
DDR4 SO DIMM Socket
DIMM1
DDR4 SO DIMM Socket
DIMM2
DDR4 SO DIMM Socket
DIMM3
DDR4 SO DIMM Socket
DP3
DISPLAY PORT HEADER
FP1
Front Panel
FPE1
FPE Top connector
J1
Front side MIC-In/ Line-Out Connector
J2
Digital I/O Box Head
J3
RS232/422/485 with 5V/12V selectable
J4
RS232/422/485 with 5V/12V selectable
J5
System Fan connector
JCMOS1
ME Flash Security
JCMOS2
RTC Reset
JM2
M.2 Signal select
JP1
LVDS_VDD select
JP3
COM1 +12/+5V selection
JP4
COM2 +12/+5V selection
JP5
AT/ATX Mode
LED2
LAN1 LED STATUS
LED3
LAN2 LED STATUS
LED4
Power/HDD LED
MCARD1
Mini PCIE Card Slot<Full size Co-lay mSATA>
MCARD2
Mini PCIE Card Slot<Full size Co-lay mSATA>
SIM_CARD1
SIM card socket

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
13
STACKPC1
PCIe/104 connector
SW1
LVDS Resolution selection
SW2
Power Button
SW3
PCIE CFG[5:6]
2.2 Jumper Settings
CN1: Inverter connector
PIN
DEFINITION
1
12V
2
12V
3
12V
4
5VS
5
5VS
6
GND
7
GND
8
BL_EN
9
LVDS_BKL_CTRL
10
GND
CN2: LVDS Connector
PIN
DEFINITION
PIN
DEFINITION
1
LVDS_BCLK
2
GND
3
LVDS_BCLK#
4
LVDS_A3
5
GND
6
LVDS_A3#
7
LVDS_B3
8
GND
9
LVDS_B3#
10
LVDS_ACLK
11
LVDS_B2
12
LVDS_ ACLK #
13
LVDS_B2#
14
GND
15
LVDS_B1
16
LVDS_A2
17
LVDS_B1#
18
LVDS_A2#
19
LVDS_B0
20
LVDS_A1
21
LVDS_B0#
22
LVDS_A1#
23
GND
24
LVDS_A0
25
LVDS_DCC_SC
26
LVDS_A0#
27
LVDS_DCC_SD
28
GND
29
+VDD_LVDS
30
+VDD_LVDS
CN7: USB2.0 Pin Header
PIN
DEFINITION
1
+USB2_VCC7
2
USB2_N7_C
3
USB2_P7_C
4
GND
5
GND
6
+USB2_VCC8
7
USB2_N8_C
8
USB2_P8_C
9
GND
10
GND

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
14
CN7: USB2.0 Pin Header
PIN
DEFINITION
1
+USB2_VCC9
2
USB2_N9_C
3
USB2_P9_C
4
GND
5
GND
6
+USB2_VCC10
7
USB2_N10_C
8
USB2_P10_C
9
GND
10
GND
CN9/CN11/CN13/CN15: Serial SATA Connectors
PIN
DEFINITION
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
CN10/CN12/CN14/CN16: SATA POWER Connector
PIN
DEFINITION
1
12V
2
GND
3
GND
4
5VS
DC_JACK1: DC-IN
PIN
DEFINITION
PIN
DEFINITION
1
GND
2
GND
3
GND
4
GND
5
+12VSB
6
+12VSB
7
+12VSB
8
+12VSB
CN17: LPC connector
PIN
DEFINITION
1
GND
2
INT_SERIRQ
3
3V3
4
LPC_AD0
5
LPC_AD1
6
LPC_AD2
7
LPC_AD3
8
LPC_FRAME#
9
CHIP_PLTRST#
10
C_LPC_CLK_SIO

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
15
DP3: DISPLAY PORT HEADER
PIN
DEFINITION
PIN
DEFINITION
1
GND
2
GND
3
DDI3_TXP0_DP_C
4
NC
5
DDI3_TXN0_DP_C
6
NC
7
DDI3_TXP1_DP_C
8
NC
9
DDI3_TXN1_DP_C
10
NC
11
DDI3_TXP2_DP_C
12
NC
13
DDI3_TXN2_DP_C
14
NC
15
DDI3_TXP3_DP_C
16
NC
17
DDI3_TXN3_DP_C
18
NC
19
DDI3_AUX_P_C
20
NC
21
DDI3_AUX_N_C
22
NC
23
GND
24
GND
25
DDI3_DDC_AUX_SEL
26
NC
27
DP3_DET
28
NC
29
DP3_PWR
30
NC
31
GND
32
GND
FP1:Front Panel
PIN
DEFINITION
PIN
DEFINITION
1
FP_HDLED+
2
FP_PLED+
3
HDLED-
4
GND
5
GND
6
PANSWIN#
7
EXT_RESET#
8
GND
9
NC
10
NC

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
16
FPE1: FPE Top Connector
PIN
DEFINITION
PIN
DEFINITION
PIN
DEFINITION
PIN
DEFINITION
PIN
DEFINITION
1
NC
2
NC
3
GND
4
3V3
5
GND
11
GND
12
NC
13
GND
14
NC
15
GND
21
NC
22
NC
23
NC
24
GND
25
NC
31
NC
32
NC
33
NC
34
NC
35
NC
41
GND
42
NC
43
GND
44
NC
45
GND
51
NC
52
GND
53
NC
54
GND
55
NC
61
NC
62
NC
63
NC
64
NC
65
NC
71
GND
72
NC
73
GND
74
NC
75
GND
81
PEG_TXP0
82
NC
83
PEG_TXP2
84
GND
85
PEG_TXP4
91
PEG_TXN0
92
PEG_TXP1
93
PEG_TXN2
94
PEG_TXP3
95
PEG_TXN4
101
GND
102
PEG_TXN1
103
GND
104
PEG_TXN3
105
GND
111
PEG_RXP_0
112
GND
113
PEG_RXP_2
114
GND
115
PEG_RXP_4
121
PEG_RXN_0
122
PEG_RXP_1
123
PEG_RXN_2
124
PEG_RXP_3
125
PEG_RXN_4
131
GND
132
PEG_RXN_1
133
GND
134
PEG_RXN_3
135
GND
141
PEG_TXP8
142
GND
143
PEG_TXP10
144
GND
145
PEG_TXP12
151
PEG_TXN8
152
PEG_TXP9
153
PEG_TXN10
154
PEG_TXP11
155
PEG_TXN12
161
GND
162
PEG_TXN9
163
GND
164
PEG_TXN11
165
GND
171
PEG_RXP_8
172
GND
173
PEG_RXP_10
174
GND
175
PEG_RXP_12
181
PEG_RXN_8
182
PEG_RXP_9
183
PEG_RXN_10
184
PEG_RXP_11
185
PEG_RXN_12
191
GND
192
PEG_RXN_9
193
GND
194
PEG_RXN_11
195
GND
PIN
NAME
PIN
NAME
PIN
NAME
PIN
NAME
PIN
NAME
6
3V3SB
7
GND
8
5VSB
9
5V
10
+12V
16
NC
17
GND
18
NC
19
5V
20
+12V
26
GND
27
NC
28
GND
29
5V
30
+12V
36
NC
37
NC
38
NC
39
NC
40
+12V
46
NC
47
GND
48
NC
49
GND
50
+12V
56
GND
57
NC
58
GND
59
GND
60
+12V
66
NC
67
NC
68
NC
69
GND
70
+12V
76
NC
77
GND
78
NC
79
GND
80
+12V
86
GND
87
PEG_TXP6
88
GND
89
GND
90
+12V
96
PEG_TXP5
97
PEG_TXN6
98
PEG_TXP7
99
GND
100
NC
106
PEG_TXN5
107
GND
108
PEG_TXN7
109
GND
110
IO_PLTRST#
116
GND
117
PEG_RXP_6
118
GND
119
PEG_A_CLK_P5
120
GND
126
PEG_RXP_5
127
PEG_RXN_6
128
PEG_RXP_7
129
PEG_A_CLK_N5
130
FPE_BUS_ERR#
136
PEG_RXN_5
137
GND
138
PEG_RXN_7
139
GND
140
3V3SB
146
GND
147
PEG_TXP14
148
GND
149
PEG_B_CLK_P6
150
GND
156
PEG_TXP13
157
PEG_TXN14
158
PEG_TXP15
159
PEG_B_CLK_N6
160
GND
166
PEG_TXN13
167
GND
168
PEG_TXN15
169
GND
170
NC
176
GND
177
PEG_RXP_14
178
GND
179
NC
180
+12V
186
PEG_RXP_13
187
PEG_RXN_14
188
PEG_RXP_15
189
3V3
190
+12V
196
PEG_RXN_13
197
GND
198
PEG_RXN_15
199
3V3
200
+12V

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
17
J1 : Audio Box Head
PIN
DEFINITION
1
GND
2
MIC1_JD
3
MIC1_R
4
MIC1_L
5
FRONT_JD
6
FRONT_R
7
FRONT_L
8
NC
9
NC
10
NC
J2: Digital I/O Box Head
PIN
DEFINITION
1
DIO0(Input)
2
DIO1(Input)
3
DIO2(Input)
4
DIO3(Input)
5
DIO4(Output)
6
DIO5(Output)
7
DIO6(Output)
8
DIO7(Output)
9
3V3
10
GND
J3: RS232/422/485 Box Head
PIN
DEFINITION
1
5V
2
GND
3
COM1P9SEL
4
COM1_DTR-
5
COM1_CTS-
6
COM1_TXD-
7
COM1_RTS-
8
COM1_RXD-
9
COM1_DSR-
10
COM1_DCD-

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
18
J4: RS232/422/485 Box Head
PIN
DEFINITION
1
5V
2
GND
3
COM2P9SEL
4
COM2_DTR-
5
COM2_CTS-
6
COM2_TXD-
7
COM2_RTS-
8
COM2_RXD-
9
COM2_DSR-
10
COM2_DCD-
J5: SYSTEM FAN Connector
PIN
DEFINITION
1
SYSTEMFAN_PWN
2
SYSTEMFAN_IO
3
+12V
4
GND
JCMOS1: ME Flash Security
Jumper
Function description
Setting
1-2
ME Lock
2-3
ME Unlock
Default setting: 1-2
JCMOS2: RTC Reset
Jumper
Function description
Setting
1-2
Default
2-3
Clear CMOS
Default setting:1-2

OXY5741AEBXSBCUser’s ManualV1.3
www.perfectron.com
19
JM2: M.2 Signal select
Jumper
Function description
Setting
1-2
PCIe
2-3
SATA
Default setting:Non-Put
JP1: LVDS_VDD select
Jumper
Function description
Setting
1-2
3.3V
2-3
5V
Default setting: 2-3
JP3: COM1 5V/12V selection
PIN
DEFINITION
PIN
DEFINITION
1
RI1#_OPTO
2
COM1P9SEL
3
5V
4
COM1P9SEL
5
+12V
6
COM1P9SEL
Default :1-2 short
JP4: COM2 5V/12V selection
PIN
DEFINITION
PIN
DEFINITION
1
RI1#_OPTO
2
COM2P9SEL
3
5V
4
COM2P9SEL
5
12V
6
COM2P9SEL
Default :1-2 short
JP5 : AT/ATX Mode Selection(Default ATX)
Jumper
Function description
Setting
Non-
Put
ATX
1-2
AT
Default setting: Non-Put