Perlesmith PSTVMCO4 User manual

V1.0
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone：[phone] Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
Assembly Instructions for TV Trolley Stand
PSTVMCO4

1
2
3
4
5
6
7
2
2
1
1
1
1
1
Thanks for choosing our stand. This stand was designed for mounting flat panel televisions
weighing up to 25 kg. The height of TV can be easily adjusted. The integrated wheels provide ease
of movement.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of
the installation, please call a qualified contractor. Check carefully to make sure there are no
missing or defective parts. Never use defective parts. Improper installation may cause damage or
serious injury. Do not use this product for any purpose that is not explicitly specified in this
manual. We can not be liable for damage or injury caused by incorrect mounting, incorrect
assembly, or incorrect use.
Required Tools: Phillips Screwdriver.
Long square tube
Short square tube
Tube connector
Tube connector cover
Pole with shelf add-on holes
Pole without holes
Pole connector
No. Picture Description Quantity
Pole cover
Wheel & Washer
8
9
2
4
Supplied Parts

TV arm set
M4x30 bolt
M6x15 bolt(x4)
M6x30 bolt(x4)
22
19
20
4
21
2
4
823
Tool kit
M6 washer
1
No. Picture Description Quantity
10
12
11
13
14
15
16
18
17
Square plate
1
1
4
M6 nut
Square plate connector
& Rubber Pad
M6x60 allen head bolt
M6 socket plate
8
4
Shelf support connecting plate
Shelf
Shelf support
1
1
2
M6x10 allen head bolt 12

M8x15 bolt(x4)
M8x45 bolt(x4)
24
25
8
4
4
26
27 4
28
29
4
8
M4 washer
M6 washer
M8 washer
M4 spacer
M6/M8 spacer(5mm)
Use Tool Kit(21)
9
2
1
Step 1 Install Wheels On The Square Tube
No. Picture Description Quantity
Attach wheels (9) to the long
and short square tube (1, 2) by
using the provided wrench (21)
Turn this nut to adjust the height of wheel.

Use Tool Kit(21)
Use Tool Kit(21)
10
3
11
1
2
Front
BACK
4
12
5
6
6
5
8
7
Step 2 Attach Square Tubes
Step 3 Attach Tube Connector Cover And Poles
Attach the square tubes (1, 2) to the
tube connection (3) by using M6x60
bolts (10) and socket plate (11)
1.Attach tube connector cover (4) to the tube
2.Attach the base pole (5) to the tube connector (4) by using M6x10 bolts (12).
3.Thread on the pole connector (7) to the top of the base pole (5)
4.Thread on the pole (6) to the pole connector (7) then install the pole cover (8) on the top
of the pole (6)

Use Tool Kit(21)
Use Tool Kit(21)
16
15
14
12 13
5
240mm
14
12
Use Tool Kit(21)
Step 4 Attach Shelf To Pole
Attach shelf supports (15) to the shelf (14)
by using M6 nuts (16)
4.1
4.3
4.2
Attach shelf connecting plate (13) to the
pole (5) by using M6x10 bolts (12)
Attach shelf (14) to the shelf connecting
plate (13) by using M6x10 bolts (12)

20
22 -24
25 -27
22-24 25-27
28-29
(if necessary)
20
Step 5 Attach Square Plate
Step 6 Secure The TV Brackets
5.1 5.2
6
17
6
12
19
18
17
Use Tool Kit(21)
Use Tool Kit(21)
Put the rubber pad in the square plate
connector (17) then use tool kit tighten
the small hole
Attach the square plate (18) by using
M6x10 bolts (12) and M6 washers (19)
CAUTION: Ensure the TV brackets
20 are EQUALLY
CENTERED on your TV AND securely fastened in place.
aScrew and washer
bScrew, washer and spacer(s)
20
20

1
2
Safety bolt
Step 8 Wire Management
Step 7 Secure Your TV
7.1
8.1
7.2
Tighten the safety bolt on the bottom of the TV brackets
Hang the TV on the plate
Option A

8.2
8.3
Option B
Option C