Pet Gear The ON-THE-GO Pet EASY STEP User manual

To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet™
INSTRUCTION MANUAL
EASY STEP
PG9700

EASY STEP • PG9700
2
PARTS LIST
Left Panel Right Panel
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
D
F
C E
E
FC
D
Easy Step Base
Front Dowel Back Dowel
AB
A
B

EASY STEP • PG9700 3
ASSEMBLY INSTRUCTIONS
Step 1
Make sure Easy Step base is upside down. Match (A)
panel with the corresponding side of the base and insert
pegs. Make sure there are no gaps between
parts after inserting.
(If inserting part is difcult put a little dish soap on
doweled end before inserting.)
Step 2
Match (B) panel with the corresponding side of the base
and insert pegs. Make sure there are no gaps between
parts after inserting.
Step 3
Insert front dowel, part (F) and (E) into corresponding
spaces. Make sure there are no gaps between parts
after inserting.
Step 4
Insert front dowel, part (D) and (C) into corresponding
spaces. Make sure there are no gaps between parts
after inserting.
A
A
B
B
FE
C
D

EASY STEP • PG9700 4
WARNING!
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw
aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive,
destructive, immature or untrained animals. Do not use near an open or exposed ame. Failure to follow these
warnings and the instructions could result in serious injury or death.
REPLACEMENT PARTS
Use only PET GEAR replacement parts.
Please have your model number ready before calling.
You can also request parts: http://www.petgearinc.com/main.asp?sel=2
192 Sheldon Avenue • West Rutland, VT 05777 • 877-752-9123 • www.petgearinc.com