Pet Gear PG8800 User manual

INSTRUCTION MANUAL
EXPEDITION
Pet Stroller
PG8800
To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For Pets
Only
Interior Dimensions:
32L x 25W x 23H
For The ON-THE-GO Pet™

EXPEDITION Pet Stroller PG8800
2
• Do not carry additional bags, goods, or accessories in or on stroller except as recommended
in the manufacturer’s instructions.
• Recommended use of an approved safety restraint correctly fitted and adjusted.
• Do not leave pet unsupervised in stroller.
• Before making adjustments to stroller ensure that pet’s body is clear of any moving parts.
• This stroller is designed for one pet only.
• Do not hang bags from handles as this may cause the product to become unstable.
• Do not use on escalator or stairs; fold stroller and carry.
• Put on brake whenever you park the stroller.
• Ensure stroller is completely erected and check that all locks are engaged before placing
pet in stroller.
• Do not overload as stroller may become unstable; maximum weight of pet using this stroller
not to exceed 150 lbs.
WARNING!
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig,
chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage
caused by aggressive, destructive, immature or untrained animals.
Do not use near an open or exposed
flame. Failure to follow these warnings and the instructions could result in serious injury or death.
PARTS LIST
Stroller
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service. No tools required.
(2) Back Wheels
(1) Liner
(1) Axle and Brakes Assembly
(2) Front Wheels

ASSEMBLY INSTRUCTIONS
3
EXPEDITION Pet Stroller PG8800
Step 1. Slide back wheel on axle as
shown in Figure A.
Step 2. Push in axel until it clicks.
Step 3. Pull on wheel to make sure the
wheel is engaged. Repeat on other side.
When finished it should look like Figure B.
Lock/Release Button
To remove wheel, push the lock/release
button (Figure C) and pull wheel off.
Figure A
Figure B
Figure C
Lock/Release Button
Back
Wheels
Inside Outside
Step 4. Position stroller frame as shown in Figure D.
Step 5. Place front wheels on stroller by clicking
them into the 6ʺ posts on the bottom of the stroller
shown in Figure D. Pull up to make sure wheels
are locked.
Step 6. Take rear wheels (on axel with brakes)
and lock them into the 2ʺ posts by placing leg
tube over the posts and pressing down until
they click (shown in Figure D). Pull up to make
sure wheels are locked.
Figure D
To remove back
wheels, press on
velco button.
To remove
front wheels,
press both
release tabs.

ASSEMBLY INSTRUCTIONS
4
Step 7. Place stroller so wheels are on the
ground and back wheels are facing you (shown
in Figure E).
Step 8. Lift right and left side of stroller up (shown
in Figure F). Secure the support bar that goes
from the left and latches down on the right side
(shown in Figure F).
EXPEDITION Pet Stroller PG8800
Figure F
Step 9. Put on the handle by pulling both
trigger-like buttons on each inside of the handle
and by placing handle-ends into the handle
locking mechanisms on each side of stroller.
Choose height level (1 or 2), then release
trigger-like buttons. Pull up on handle to make
sure it is securely locked. This is shown in
Figure G.
Handle Locking Mechanism
Trigger-Like Buttons
Figure G
Figure E

5
EXPEDITION Pet Stroller PG8800
TO USE FRONT WHEEL-LOCKING MECHANISM
Step 1. To engage front wheel-locking mechanism so
that the front wheel does not swivel, (best when stroller
is used for fast walking or running), make sure wheel is
facing forward (so red tab is at the front of stroller) and
pull the red tab up.
Step 2. To disengage locking mechanism so that the
front wheel swivels, (for easy steering), push tab down.
Lock
Unlock
FEATURES
• Extra-wide protective pet compartment.
• Adjustable height handle.
• Folds flat for storage.
• Wheel brakes and shock absorbers.
• Internal pad with waterproof tray.
• Easy fold mechanism.
• 600 denier nylon.
• Interior safety tether.
• Storage pouch for all of your extras.
• Ergonomic handle.
• Interior dimensions: 32"L x 25"W x 23"H (80cm x 63cm x 61cm).

EXPEDITION Pet Stroller PG8800
TO FOLD/PACK UP STROLLER
2. Pull support bar up to release and continue to
swing the bar counter-clockwise.
3. Fold sides inward, until flat, as shown below.
1. Remove handlebar, by pushing velco pins
in to release. Pull handlebar up and off.
6

7
EXPEDITION Pet Stroller PG8800
•Always store product in a clean, dry place.
• Not recommended for use on the beach.
• Do not put heavy items on top of the stroller.
•Clean frame by wiping with a lightly oiled cloth.
• Do not use detergent or abrasives. Spot clean fabric with dry cleaning fluid or mild soap and warm water.
•To ensure easy maneuverability and to minimize wear and tear, (especially wheels, axles, and swivels),
keep all moving parts clean and lubricated with WD40® or light machine oil.
• NOTE: Do not lubricate brake components or swivel locks.
• Regularly check stroller for loose parts. These should be tightened or replaced.
LOOKING AFTER YOUR STROLLER
REPLACEMENT PARTS
Please have your model number ready before calling. Use only PET GEAR replacement parts.
•To clean and lubricate front and rear wheels, push out locking lever under wheel housing
to release rear wheel.
•To ensure ease of maneuverability and to minimize wear and tear, keep all moving parts
clean and lubricated with WD40® or light machine oil.
•Push wheel sets back on until they click and lock in position; pull on wheel housings to
ensure they are secure.
•Push stroller back and forth and rotate swivels around to work in lubricant.
•Clean the rear wheel assembly and the rest of the frame with warm, soapy water; clean
off with warm water and dry thoroughly.
•NOTE: Do not lubricate brake components or swivel locks.
WHEEL MAINTENANCE
For Pets
Up To
150 lbs
PO Box 99
West Rutland, VT 05777
877-752-9123
www.petgearinc.com